Calculation of catalyzed flue gas dust solubility
Thread Content
Hello, I would like to know how the dust concentration in the flue gas at the outlet of the catalytic tri-rotor is calculated
External sampling method: Clean the filter cartridge and weigh it—take a sample—weigh the contaminated filter cartridge; the difference in weight between the two cartridges represents the mass of dust. The flow rate used in the calculation during sampling serves as the basis for the gas volume, and the ratio of the dust mass to this gas volume gives the dust concentration
In addition to the actual measurement method on the second floor, another approach involves using the solid content of the flue gas purification catalyst and the volume of flue gas to estimate the dust concentration at the outlet of the three-spinner； The dust concentration at the outlet of the three-spinner is inferred from the solid dust content at the flue gas purification inlet.