Are there parameters for the density of toluene at its saturated vapor pressures at different temperatures?
Thread Content
This post was last edited by zb030121eric on 2023-3-23 20:11. Are there any parameters indicating the density of toluene at its saturated vapor pressures at different temperatures? What concentration of toluene remains when it is cooled by chilled water at minus 25 degrees?
There are parameters for the saturated vapor pressure and density of toluene at different temperatures; specific values can be found in relevant physical chemistry manuals or online databases. For example, at room temperature (25°C), the saturated vapor pressure of toluene is approximately 0.1 MPa, and its density at this temperature is about 0.86 g/cm³ ； At high temperatures (100°C), the saturated vapor pressure of toluene can reach approximately 0.78 MPa, and its density at this temperature is about 0.72 g/cm³. It should be noted that both the density and vapor pressure of toluene are affected by factors such as environmental conditions and purity. .
I’m not quite sure – is the saturated vapor pressure of toluene 0.1 MPa at room temperature?
Saturated vapor pressure of toluene at 25°C and at 100°C