Make comprehensive use of warm water at 60°C
Thread Content
Discharging 1000 m3/h of warm water at 60°C directly or cooling it in a cooling tower is quite wasteful. Does anyone have any ideas for comprehensive utilization of this water?
Reply to 1# feibiao101: The original poster can take advantage of their own production processes; water at 60°C can be used in heat exchangers to exchange heat with media at temperatures below 30°C, or it can be used to cool media at 80°C.
Check if the office buildings and dormitory areas can be used for underfloor heating and hot water!
Supply heat to the dormitory, heating those equipment and pipes that are prone to freezing
Low-grade heat recovery is a challenge in this industry; the key lies in optimizing the heat exchange process at various stages, minimizing losses of useful energy, and maximizing thermodynamic efficiency. If such a large amount of \"warm water\" at 60°C has already been generated, as the original poster mentioned, at the current level it essentially has no value for industrial recovery.
Enhance the utilization of energy management. Used for underfloor heating and cooling.
”Can we make use of the principle of heat pumps?
Reply to 7# feibiao101: Heat pump distillation is limited by the heat pump’s inlet temperature, power consumption, and the heat requirements of the device itself. In the case of distillation, for large-scale units or distillation columns with a high reflux ratio, differential pressure multi-effect distillation or coupling between the condensers and reboilers of different columns can be considered.