9.0 List of Equipment for Power Plant Generators

Thread Content

9.0 List of Equipment for Power Plant Generators │ ├─9.0 General Information on Generation, Power Plants, and Generator Equipment │ 300MW Electrical Operation Procedures (Shangqiu Yudong Power Generation Company).doc │ Phase 1 of the 5000td Clinker Cement Production Line with Waste Heat Power Generation Project.doc │ AGC Control for 600MW Supercritical Units.doc │ Maintenance Procedure Guidelines for Turbine Equipment in the Main Plant 1 – LanChao Power.doc │ Maintenance Procedure Guidelines for Turbine Equipment in the Main Plant 2 – LanChao Power.doc │ Research on Optimized Maintenance Plans for Equipment at Huaneng Luohuang Power Plant 80 │ Minimum Distances Between Various Structures in a Power Plant.doc │ Maintenance Documentation Package for Power Plants – Procedure Guidelines – Boiler Water Wall.doc │ Equipment Maintenance in Power Plants.doc │ Labor Quotas for Maintenance of Power Generation Equipment.doc │ Model Regulations on Process Discipline for Maintenance of Power Generation Equipment (Trial).doc │ Technical Specifications for Compressed Air Systems and Drying/Filtering Devices in Power Generation Projects.doc │ Equipment Allocation Management System for Maintenance Companies – Power Generation Co., Ltd.doc │ Wang Zhenming: Heat Integration Should Contribute to GDP.doc │ Technical Specifications for Construction and Acceptance of Power Generation Facilities (Boiler Units Section).doc │ Test Procedures for Condition Assessment of Power Equipment – Chongqing Electric Power Company.doc │ Maintenance Standards for Primary Equipment in Power Plants.doc │ Four Major Standards for Maintenance and Repair of Equipment by LanChao Power.doc │ Equipment Maintenance Management Regulations – Huaneng Power Plant Enterprise Standards 13.doc │ Equipment Maintenance Scheduling Management Standards – Power Supply Company Enterprise Standards 24.doc │ ├─9.0 Books on Generation, Power Plants, and Generator Equipment │ 11-022 Vocational Skill Assessment Guidelines for Thermal Network Operators, 2nd Edition │ 11-031 Vocational Skill Assessment Guidelines for Plant Power Operators, 2nd Edition – Electrical Operation and Maintenance in Power Engineering │ 11-077 Vocational Skill Assessment Guidelines for Secondary Wiring Installation, 2nd Edition – Electrical Installation in Power Plants │ Insulation Testing of Stator Windings in 1750MW Nuclear Generators │ Application Manual for Standard Regulations in Power Enterprise Management, 2004 │ Design and Simulation of 20+MJ Compensation Pulse Generators │ Training Materials on Operation and Maintenance of 300MW Thermal Power Generators – Chemical Section │ Technical Series on 300MW Heat Integration Units: Generators and Electrical Equipment │ Training Materials on 600MW Thermal Power Generators: Electrical Equipment and Systems – East China Six Provinces and One Municipality Electrical Engineering Society │ Training Materials on 600MW Thermal Power Generators: Environmental Protection │ Training Materials on 660MW Ultra-Supercritical Thermal Power Generators – Electrical Section, 2011 Edition │ NEMA MG 1-2009: Motors and Generators │ Low and Medium Temperature Waste Heat Power Generation Technology, edited by Weng Shilei； Written by Yu Lijun, Zhu Yadong, Wu Yuandan; 2015 edition │ Guidelines for Thermal Power Plant Design of China Huaneng Group Corporation – Part 1: Guidelines for Thermal Power Plant Design │ China Electric Power Encyclopedia: Nuclear Power Generation Volume, 3rd edition_2014 │ China Electric Power Encyclopedia – Hydropower Generation Volume 6 │ Chinese Electrical Engineering Encyclopedia, Volume 5: Hydropower Generation Projects │ Chinese Electrical Engineering Encyclopedia, Volume 6: Nuclear Power Generation Projects │ Chinese Electrical Engineering Encyclopedia, Volume 7: Renewable Energy Generation Projects │ Research on Energy-Saving Power Generation Scheduling, 2nd edition │ Installation and Maintenance of Small and Medium-Sized Turbogenerators │ Operation and Maintenance of Small and Medium-Sized Turbogenerator Sets │ Mechanical Maintenance of Small and Medium-Sized Francis Turbogenerator Sets and Repair Techniques for Key Wear Parts │ Production Equipment and Operation in Small and Medium-Sized Thermal Power Plants 605 │ Design Manual for Small and Medium-Sized Cogeneration Plants 1294 │ Testing of Electrical Equipment in Small and Medium-Sized Power Stations, by Wang Rongxian │ Installation and Commissioning of Low-Voltage Power Generation Equipment, 2010 edition │ Organic Rankine Cycle Technology for Low-Temperature Waste Heat Power Generation 87 │ Organic Rankine Cycle Technology for Low-Temperature Waste Heat Power Generation, 2010 edition │ Organic Rankine Cycle Technology for Low-Temperature Waste Heat Power Generation (by Wang Hua) │ Waste Heat Power Generation 44 │ Practical Handbook on Waste Heat Power Generation │ Advanced Manufacturing Technologies and Applications: Structure and Principles of Doubly-Polar DC Generators, 2012 │ National Generator Set Manual │ Series of Textbooks for Vocational Training in Metallurgical Power Engineering: Operation and Maintenance of Pressure-Driven Power Stations, edited by Zhang Wei, 2011 edition │ Distributed Power Generation – Induction and Permanent-Magnet Generators │ Distributed Power Generation and Microgrid Technologies, 2011 edition │ Distributed Power Generation and Smart Grids, 2013 edition │ Introduction to Distributed Power Generation, 2013 edition │ Glossary of Terms in Power Engineering │ Introduction to Power Engineering, 2nd edition, 2014 edition │ Centralized Control Operation of Unit Generators, edited by Zhao Shuang and Li Xijun, 2015 edition │ Centralized Control Operation of Unit Generators and Skill Training, edited by Wang Xiangwei and Wang Yongcheng, 2011 edition │ Systems and Equipment in Pressurized Water Reactor Nuclear Power Plants, 2012 edition │ Structure and Principles of Doubly-Polar DC Generators │ Analysis and Application of Transition Processes in Two-Winding AC/DC Generators, by Sun Junzhong, 2018 edition │ Engine Electronic Control Technology 201 │ Management Manual for Operational and Production Indicators of Power Generation Enterprises, 2012 edition │ Management of Equipment Inspection, Routine Maintenance, and Repair in Power Generation Enterprises, edited by He Xiaoming, 2010 edition │ Introduction to Power Generation Systems, 2011 edition │ Excitation Regulation in Power Plants │ Relay Protection Setting Calculations for Auxiliary and Industrial Power Systems in Power Plants, 2012 edition │ Electrical Equipment in Power Plants and Substations, 2012 edition │ Secondary Circuits and Fault Analysis in Power Plants and Substations, 2011 edition │ Thermal Systems and Equipment in Power Plants, by Yan Junjie (high-resolution text version) │ Thermal Equipment in Power Plants 366 │ Analysis, Handling, and Preventive Measures for Thermal Faults in Power Plants, 2016 special issue │ On-Site Guidance for Power Plants, compiled by Wang Yongchuan, 2012 edition │ Main Electrical System of Power Plants, 3rd edition, compiled by Xu Min, Sun Fengqi, and Che Renqing, 2016 edition │ Electrical Operators in Power Plants, 2010 edition │ Electrical Engineering in Power Plants – Textbook for Higher Education Institutions │ Tutorial on Electrical Operation in Power Plants, compiled by Wang Dejiang, Sun Yumei, and Yang Ming, 2015 edition │ Electrical Operation in Power Plants (for higher vocational education), compiled by Hu Ping, 2012 edition │ Electrical Components in Power Plants, edited by Wang Chunmin and He Anguo, 2011 edition │ Electrical Components in Power Plants, 5th edition, edited by Miao Shihong and Zhu Yongli, 2015 edition │ Electrical Components in Power Plants │ Case Studies on Comprehensive Technical Upgrades in Power Plants, compiled by Wangting Power Plant and Qishuyan Power Company, 2016 edition │ Operation and Commissioning of Automatic Devices in Power Plants, edited by Wang Can ； Wang Xianping, Deputy Editor-in-Chief ； Chief Reviewer: Sheng Guolin │ 2016 Edition │ Questions and Solutions on Centralized Control Operation of Power Plants │ Technical Standards and Specifications for Installation, Fault Detection, and Maintenance of Power Plant (Station) Equipment │ Principles of Transistor-Type Protection Relays for Generators and Transformers │ Cooling Media for Generators and Their Monitoring │ Q&A on Generator Excitation Technology and Accident Analysis │ Application of Relay Protection for Generators and Transformers (2nd Edition) │ Application of Relay Protection for Generators and Transformers │ Examples of Relay Protection Setting Calculations for Generators │ Fault Inspection, Analysis, and Prevention in Generators │ Compilation of Documents on Safety Evaluation Management for Generator Sets Connected to the Grid, 2014 │ Maintenance Technology for Generator Sets, 2nd Edition │ Introduction to Power Generation, 2013 │ Intelligent Fault Diagnosis Technology for Power Generation Equipment, 2014 │ Management of Periodic Inspection and Maintenance for Power Generation Equipment │ Condition-Based Maintenance of Power Generation Equipment (2) │ Condition-Based Maintenance of Power Generation Equipment │ Condition-Based Maintenance and Diagnosis Methods for Power Generation Equipment │ Condition Monitoring and Life Management of Power Generation Equipment, 2013 │ Training on the Principles of Synchronous Generator Excitation │ Principles and Applications of Semiconductor Excitation for Synchronous Generators, 2nd Edition │ Digital Excitation Regulators for Synchronous Generators │ Excitation Regulation of Synchronous Generators │ Operation and Maintenance of Synchronous Generators │ Operation Technology and Practices for Synchronous Generators │ **Vocational Skill Standards (2019 Edition): Centralized Control Operators for Power Generation │ International EPC Power Plant Engineering Handbook, edited by Wang Shoumin, 2015 Edition │ Series on Advanced Technologies in Electrical Engineering: Control Technologies in Power Generation Equipment, high-resolution editable text version │ Series on Advanced Technologies in Electrical Engineering: Efficient and Renewable Distributed Power Generation Systems, high-resolution editable text version │ Training Materials for On-Site Maintenance at Local Power Plants: Maintenance of Fuel Equipment, by Zhang Benxian, 2016 Edition │ Waste-to-Energy Generation Technology and Engineering Examples, edited by Wang Yulin, Chemical Industry Press, 2003 │ Waste Incineration for Power Generation and Secondary Pollution Control Technologies, 2011 Edition │ Embedded Condition Monitoring of Power Generation Equipment Based on Industrial Networks │ High-Power Steam Turbogenerators and Their Operation (Volumes I and II) │ Vibration of Rotors and Support Systems in High-Power Steam Turbogenerator Sets, by Li Luping, Jin Fenghua, Zhang Shihai, Chen Xiangmin, 2017 Edition │ Internal Fault Analysis and Relay Protection for Large Generators and Transformers │ Key Technologies for Manufacturing Guard Rings for Large Generators, 2012 │ Online Monitoring and Diagnosis Techniques for Fault Discharges in Large Generators, by Wu Guangning │ Online Monitoring and Diagnosis Techniques for Fault Discharges in Large Generators │ Theories and Methods for Reliability Prediction and Safe Operation of Large Generator Sets, 2014 │ Relay Protection Setting Calculations and Operation Techniques for Large Generator Sets (2nd Edition), by Gao Chunru, 2010+ bookmarks │ Relay Protection Setting Calculations and Operation Techniques for Large Generator Sets │ Fault Analysis and Diagnosis of Large Generator Rotors, 2011 Edition │ Design, Manufacturing, and Operation of Large Steam Turbogenerators, 2012 │ Series on Control Technologies for Large Thermal Power Plants: Digital Electro-Hydraulic Control and Bypass Control Systems │ Series on Control Technologies for Large Thermal Power Plants: Distributed Control Systems in Power Plants │ Series on Practical Maintenance Techniques for Large Thermal Power Plants: Electrical Section │ Maintenance Manual for Large Thermal Power Plants, 2016 Edition │ Economic Operation and Energy Saving Optimization of Large Thermal Power Plants, compiled by Datang International Power Generation Co., Ltd., 2011 Edition │ Training Materials for Operation and Maintenance of Large Thermal Power Plants: Electrical Section, 2010 Edition │ Knowledge Required for Centralized Control Operations of Large Thermal Power Plants and Solutions to Difficult Issues │ Guidelines for Centralized Control Operations of Large Thermal Power Plants, by Yin Jing │ Operation and Management of Large Thermal Power Plants, 2010 Edition │ Series on Gas-Turbine Combined Cycle Power Generation Technologies: Performance Testing Section │ Series on Gas-Turbine Combined Cycle Power Generation Technologies: Control System Section │ Series on Gas-Turbine Combined Cycle Power Generation Technologies: Comprehensive Section │ Series on Gas-Turbine Combined Cycle Power Generation Technologies: Equipment and Systems │ Large Gas-Turbine Combined Cycle Power Generation Equipment and Operation: Electrical Section, high-resolution editable text version │ Condensers in Large Power Plants │ Training Materials for the Operation of 2×1000MW Units at Ninghai Power Plant: Chemical Section │ Training Materials for the Operation of 2×1000MW Units at Ninghai Power Plant: Electrical Section │ Practical Use and Maintenance of Small Power Generation Equipment, 2010 Edition │ 200 Practical Questions on Small Power Generation Technologies, by Fang Dqian, 2016 Edition │ Quick Guide to the Smart Use and Repair of Small Generators, 2010 Edition │ Practical Design Manual for Small Thermal Power Plants, 83 │ Inertial Energy Storage AC Pulse Generators, by Cui Shumei and Wu Shaopeng, 2015 Edition │ Design of Pumped Storage Power Plants, Volume I │ Comparative Study and Insights into International Policies Supporting the Waste Incineration for Power Generation Industry, 2011 Edition │ Integrated Gasification Combined Cycle (IGCC) Power Generation Projects, edited by Xu Shisen, 2016 Edition │ Low-Voltage Ride-Through for New Energy Grid-Connected Power Generation Systems, 2014 Edition │ Textbooks for Regular Higher Education under the 13th Five-Year Plan: Auxiliary Equipment for Hydraulic Units │ Intelligent Power Generation Control, 2019 Edition │ Latest Practical Manual on Optimal Design, Installation, Commissioning, Maintenance, and Repair of Diesel Generator Sets │ Latest Guidebook on Engineering Design, Production Techniques, and Application Examples for Cogeneration Projects, Volume 1, edited by Ma Ming, 2007 Edition │ Latest Guidebook on Engineering Design, Production Techniques, and Application Examples for Cogeneration Projects, Volume 2, edited by Ma Ming, 2007 Edition │ Latest Guidebook on Engineering Design, Production Techniques, and Application Examples for Cogeneration Projects, Volume 3, edited by Ma Ming, 2007 Edition │ Latest Guidebook on Engineering Design, Production Techniques, and Application Examples for Cogeneration Projects, Volume 4, edited by Ma Ming, 2007 Edition │ Diesel Generator Sets │ Examples of Use and Maintenance of Diesel Generator Sets │ Practical Skills Related to Diesel Generator Sets, 2013 Edition │ Use of Diesel Generator Sets │ Format and Content of Pre-Fueling Commissioning Reports for Nuclear Power Plants │ Format and Content of Commissioning Plans for Nuclear Power Plants │ Environmental Management in Nuclear Power Plants, edited by Yang Lanhé ； China National Nuclear Corporation, compiled. 2012 edition │ Evaluation of Nuclear Safety Equipment, edited by Wang Ying. 2016 edition │ Textbook Series for Nuclear Engineering and Nuclear Technology: General Mechanical Equipment in Nuclear Power Plants, authored by Su Guanghui et al. 2016 edition │ Theory and Applications of Flow-Induced Vibration in Nuclear Engineering, authored by Jiang Naibin, Feng Zhipeng, Zang Fenggang et al. 2018 edition │ Pre-Construction Management and Goal Optimization for Nuclear Power Projects. 2013 edition │ Seismic Adaptability Assessment Techniques for Rock Foundations of Nuclear Power Plants, authored by Jiang Yujing, Yang Lei. 2016 edition │ Series on Nuclear Power Plant Commissioning Techniques: Electrical Secondary Systems, edited by Chen Tiansheng. 2015 edition │ Project Management in Nuclear Power Plants, authored by Ren Dexi. 2003 edition │ Practical Guide to Quality Assurance in Nuclear Power, compiled by Jiang Youmin. 2013 edition │ Textbook Series in Nuclear Science and Technology: Systems and Operation of Nuclear Power Plants, compiled by Yu Jiyang. 2016 edition │ Principles of Nuclear Power Generation, 2nd edition. 2011 edition │ Principles and Technologies of Nuclear Power Generation. 2014 edition │ Introduction to the Principles of Nuclear Power Generation. 2010 edition │ Research on Parameter Identification in Nuclear Power Generation Systems. 2014 edition │ Auxiliary Equipment for Hydrogenerators. 2013 edition │ Waste Heat Recovery in the Cement Industry and Related Projects. 2011 edition │ Comprehensive Guide to Low-Temperature Waste Heat Recovery Technologies in Cement Kilns │ Installation Techniques for Hydrogenerators │ Fault Handling and Maintenance of Hydrogenerators │ Installation of Hydrogenerators │ PCC Control for Hydrogenerator Sets │ Case Studies of Hydrogenerator Sets. Compiled by the Electric Power Research Institute of State Grid Hunan Electric Power Company ； Editor-in-Chief Wu Changli 2015 Edition │ Dynamics of Hydrogenerator Sets │ Principles and Methods of Dynamic Problems and Fault Diagnosis of Hydrogenerator Sets 2013 │ Operation of Hydrogenerator Sets and Auxiliary Equipment │ Installation and Maintenance of Hydrogenerator Sets 2012 │ Modification, Capacity Increase and Optimized Operation of Hydrogenerator Sets 2010 Edition │ Installation and Maintenance of Hydrogenerator Sets 191 │ Installation and maintenance of hydraulic generator set 199 pages │ Installation of auxiliary equipment of hydraulic generator set │ Operation and maintenance of hydraulic generator set │ Operation technology of hydraulic generator set │ Deterioration configuration analysis of hydraulic generator set operating status │ Operation monitoring and maintenance of hydraulic generator structure │ Design and calculation of hydraulic generator │ Mechanism, design and application of permanent magnet generator 2012 │ Turbine generator fault inspection analysis and prevention 2nd edition 2010 edition │ Metallographic diagram of steel for turbine generator │ Turbine generator set torsional vibration safety analysis and application 2013 │ Turbine generator set vibration diagnosis and case analysis by Zhang Guozhong, Wei Jilong 2018 edition │ Turbine generator set vibration diagnosis technology Q&A Guo Baoren, Chang Hao 2016 edition │ Vibration and balance of turbine generator set │ Turbine generator set rotor and structural vibration edited by Wang Yanbo 2016 edition│ Analysis of typical problems and fault diagnosis of turbine generator rotor edited by Wu Yucai and Li Yonggang 2015 edition│ Fahan turbine generator set installation vocabulary 2014│ Tidal generator set 2014│ Thermal power generation enterprise emergency response card * * Electric Power Investment Group Company 2017 edition │ Intelligent coal-fired system for thermal power plants by Hu Jie, Dong Jianming, and Liu Zhanming 2018 edition │ Underground trench design manual for thermal power plants and substations 86 │ Practical technical questions and answers for thermal power plant workers junior workers 470 │ Pneumatic ash removal technology and its application in thermal power plants 393 │ Design and calculation method of pulverized coal preparation system for thermal power plants 182 │ Thermal Power Plant Maintenance and Defect Elimination Technology Q&A Series Thermal Control Volume 502 │ Theoretical Part of Thermal Power Plant Auxiliary Machine Centralized Control Position Certification Textbook Compiled by Datang International Power Generation Co., Ltd. 2013 Edition │ Thermal Power Plant Metal Fracture and Failure Analysis │ Thermal Power Plant Metal Materials Manual 1142 │ Thermal Power Plant Steel Platform Escalator Design Manual 202 │ New Technologies for Energy Saving and Emission Reduction in Thermal Power Generation and Combined Heat and Power, edited by Zhao Changchun, Chen Yuan and Fu Lin, 2016 Edition │ Outline of Quality Supervision and Inspection of Thermal Power Generation Projects * * The Energy Administration released the 2014 edition │ Thermal power generation new technology and new equipment training materials 568 │ Thermal power generating unit maintenance quotas volume 2 600MW coal-fired unit maintenance engineering China Electricity Confederation released the 2015 edition │ Thermal power generating unit maintenance quotas volume 3 1000MW coal-fired unit maintenance engineering China Electricity Confederation released the 2015 edition │ On-site Standard Operation Instructions for Thermal Power Generator Unit Operators, Chemistry Volume, Wangting Power Plant Edition, 2015 Edition│ On-site Standard Operation Instructions for Thermal Power Generator Unit Operators, Steam Turbine Volume, Editor-in-Chief Bao Xianzhong, 2015 Edition│ On-site Standard Operation Instructions for Thermal Power Generator Unit Operators, Fuel Volume, Wangting Power Plant Edition, 2015 Edition│ On-site Standard Operation Instructions for Thermal Power Generator Unit Operators, Electrical Volume, edited by Bao Xianzhong, 2015 Edition│ On-site standard operation instructions for thermal power generation unit operators, Desulfurization and Ash Removal Volume, edited by Bao Xianzhong, 2015 edition │ Thermal Power Equipment Technical Manual Volume 2 Steam Turbine │ Thermal Power Equipment Technical Manual Volume 4 Thermal Power Station Systems and Auxiliary Machines │ Thermal Power Generation Project Preliminary Work Practice Zhang Donghui et al. 2011 Edition │ Fault Diagnosis of Key Equipment for Thermal Safety Power Generation 2013 │ Practical Manual on Innovative Design, Installation, Debugging, Overhaul, Operation and Maintenance of Thermal Power Plant Decentralized Control System│ Thermal Power Plant Decentralized Control System Principle and Application 2010 Edition│ Thermal Power Plant Flue Gas Desulfurization Technology Standards and Mainstream Process Design, Manufacturing, Installation, Commissioning, Operation and Maintenance Post-Evaluation Implementation Manual│ Thermal Power Plant Thermal Equipment Overhaul Technology│ Thermal Power Plant Thermal Automation System Test│ Thermal Power Plant Thermal Control System Power Supply Reliability Configuration and Pre-Control│ Thermal Power Plant Production Posts Technical Questions and Answers Chemical Overhaul 2011 Edition │ Thermal Power Plant Production Posts Technical Questions and Answers Chemical Overhaul "Thermal Power Plant Production Posts Technical Questions and Answers" Edited by the Editorial Board 2010 Edition │ Thermal Power Plant Production Posts Technical Questions and Answers Electrical Maintenance 2010 Edition │ Thermal Power Plant Production Posts Technical Questions and Answers Electrical Operation "Thermal Power Plant Production Posts Technical Questions and Answers" Thermal Power Plant Production Posts Technical Questions and Answers compiled by the Editorial Board 2010 Edition │ Thermal Power Plant Production Positions Technical Questions and Answers Series Electrical Operation 300 Questions edited by Jian Angang, Wang Dongchuan 2014 edition │ Thermal Power Plant Production Positions Technical Questions and Answers Series Centralized Control Operation 300 Questions edited by Jian Angang 2014 Edition │ Thermal Power Plant Production Positions Technical Questions and Answers Electrical Operation 2011 Edition │ Thermal Power Plant Feedwater Heater Operation, Maintenance and Overhaul - Editor-in-chief Dong Weiguo and others - published in 1997 │ Thermal power plant process control │ Thermal power plant deaerator │ Thermal power project construction typical problem list China Huadian Group Co., Ltd. Infrastructure Engineering Department, China Huadian Science and Industry Group Co., Ltd. 2018 edition │ Thermal power project quality typical cases China Power Investment Group Co., Ltd. 2015 edition │ Thermal power construction engineering unit commissioning management manual 2014 edition edited by Xu Yang │ Thermal power unit simulation training guidance material 125MW volume compiled by Datang Heilongjiang Power Generation Co., Ltd. 2015 edition│ Thermal power unit simulation training guidance material 200MW volume Datang Heilongjiang Power Generation Co., Ltd. 2016 edition│ Thermal power unit simulation training guidance material 300MW volume Datang Heilongjiang Power Generation Co., Ltd. 2016 edition│ Thermal power unit simulation training guidance material 300MW (circulating fluidized bed) volume compiled by Datang Heilongjiang Power Generation Co., Ltd. 2016 edition│ Thermal power unit simulation training guidance material 350MW volume compiled by Datang Heilongjiang Power Generation Co., Ltd. 2016 edition│ Thermal power unit simulation training guidance material 600MW volume compiled by Datang Heilongjiang Power Generation Co., Ltd. 2015 edition│ Technical analysis of typical cases of thermal power units and preventive measures edited by Huainan Electrical Engineering Society 2012 edition │ The main equipment of thermal neutron shell reactor nuclear power plants Dimitrev Sergey 2015 edition │ Thermal power generation Wang Youguo, co-edited by Peng Jinxuan │ Thermal power plant 2004 edition Ye Tao, Huazhong University of Science and Technology 324 │ Thermal power plant 100 │ Thermal Power Plant 341 │ Thermal Power Plant Fifth Edition Edited by Ye Tao and Zhang Yanping 2016 Edition │ Thermal Power Plant Edited by Xiao Zenghong and Zhou Zhenqi 2012 Edition │ Thermal Power Plant Gao E and Liu Jianmin 1995 Edition │ Thermal Power Plant Technical Questions and Answers Edited by Yang Dong 2015 Edition │ Thermal Power Plant (Second Edition) 325 │ Thermal equipment installation and maintenance Liu Zhongmao 323 │ Thermal equipment installation and maintenance Li Runlin 319 │ Thermal equipment maintenance 2012 │ Thermal equipment maintenance basic technology 250 │ Thermal equipment maintenance basic technology (2nd edition) Zhou Hongkui 247 │ Thermal equipment water and gas physical and chemical process 153 │ Thermal equipment assembly and maintenance 296 │ Thermal Control Volume 2010 Edition │ Thermal Control Equipment Installation and Maintenance Questions and Answers Large Thermal Power Generator Installation and Maintenance Questions and Answers Series │ Thermal Power Plant Construction and Engineering Examples 265 │ Thermal Power Engineering Zhou Guangzhao 344 │ Thermal Energy Engineering Design Manual (Machinery Industry Press) 762 │ The Fuel Volume edited by Deng Jinfu 2008 Edition │ Gas-Steam Combined Cycle Generator Set Self-Start-Stop Control Technology and Application 2014│ Coal-fired Generator Set Energy Consumption Analysis and Energy Saving Diagnosis Technology 2014│ Environment and Chemistry Professional Thermal Power Plant Practical XL Tutorial 2011 Edition│ Modern Power Plant Introduction Third Edition 2014│ Modern Synchronous Generator Excitation System Design and Application (Second Edition)│ Modern Synchronous Generator Excitation System Design and Application│ Modern Diesel Generator Technology Yao Junqi 2007 │ Application and Management of Modern Diesel Generators │ A Practical Book of Installation, Debugging, Operation, Testing and Fault Diagnosis of Modern Thermal Power Generators │ Biomass Energy and Its Power Generation Technology 357 │ Training Materials for the Management Ability of Employees of Electric Power Enterprises │ A Reader on Emergency Management Knowledge of Electric Power Enterprises │ Standardized Management of Electric Power Enterprises │ A Complete Practical Book of Standardized Management and Quality Certification Operations of Electric Power Enterprises │ Modern management of electric power enterprises │ Electric power enterprise management │ Standard template for electric power enterprise management │ Economic management of electric power enterprises │ Standardized management operation template of electric power enterprises │ Theory, method and application of full life cycle management of electric power enterprise assets 2010 edition │ Electric power engineering design manual 08 Primary electrical design of thermal power plants │ Electrical power engineering design manual 09 Secondary electrical design of thermal power plants │ Electrical power engineering design manual primary electrical design of thermal power plants (optimized version) │ Complete book on practical technologies and operating procedures for power engineering operation and maintenance, power generation engineering volume │ Question bank for the qualification examination for electric power technical supervision personnel, Thermal Power Metal Supervision, 2013 edition compiled by China Huaneng Group Corporation │ "1000 Whys" series of books on electric power production 14 1000 questions on general knowledge for power enterprise management positions (2007) │ Modern technology of electric power production: Thermal Power Plant Section Editor-in-Chief Wang Honglin 1991 Edition │ Power Monitoring and Fault Diagnosis Technology Complete Book Power Generation Volume 500 Thermal Power │ Power Monitoring and Fault Diagnosis Technology Complete Book (4) Substation, Arrester, Capacitor Volume (Volume 2) │ Power System Operation, Operation, Maintenance Procedures and Technical Specifications Practice Complete Book │ Power System Stability and Generator Excitation Control │ Practical Technical Manual of Electric Power Equipment in 2014│ Practical Technical Questions and Answers on Maintenance of Electric Power Equipment│ Test Methods and Diagnostic Technology of Electric Power Equipment in 2013│ Electric Power Equipment Selection Manual in 2012│ Electric Power Testing Technology Series_Generator excitation system test │ Technical transformation and optimized operation of power plant cold end system │ Power plant chemistry │ Power plant chemistry technology Q&A │ Power plant chemical equipment maintenance (intermediate worker) │ Power plant chemical equipment maintenance (senior worker) │ Power plant chemical equipment maintenance technology Q&A ( * * Electric Power Company 2002 Edition) 274 │ Inspection and maintenance of chemical equipment in power plants: Junior Engineering │ Practical Manual on Operation and Maintenance Management of Power Plant Chemical Equipment and Power Plant Chemical Supervision Technology │ Principles and Applications of Energy Saving Analysis of Power Plant Thermal Systems │ Power Plant Thermal Equipment and Operation │ Power Plant Fuel Equipment Maintenance Technology HD Editable Text Version │ Power Plant Fuel Design (Volume 1 and 2) │ Motor Maintenance and Calculation - Transformer·Motor·Generator│ Numerical Simulation of Thermal Performance of Power Station Condenser and Its Application by Wang Guoshan 2010 Edition │ Power Station Condensing Equipment and Cooling System │ Power Station Complete Equipment Product Manual │ Power Station Turbine Generator Technical Questions and Answers Petrochemical Equipment Technical Questions and Answers Series │ Power Station Steam Turbine Generator Technical Questions and Answers │ Power Station Equipment Manual │ Power Station Supporting Equipment Product Manual Coal Yard Equipment, Coal Conveying Equipment │ Power Station Boiler Operation and Combustion Adjustment 3rd Edition by Huang Xinyuan 2016 Edition │ Power Grid Equipment Monitoring and Operation Management Technical Questions and Answers 2015 Edition * * 2015 edition edited by Electric Power Dispatching Control Center│ Electric energy metering technology and fault handling edited by Ou Chaolong 2015 edition│ Condition maintenance technology of electric energy metering devices edited by Wu Chongmin and Nie Yixiong 2017 edition│ Electric energy metering equipment fault analysis and reliability technology 2014│ Third generation nuclear power technology AP1000 2010 edition│ Nanogenerator in Self-driven System of Nanoscience and Technology 2012 │ Vocational Skills Assessment Petroleum and Petrochemical Industry Question Bank Selected Thermal Automation Equipment Maintenance Worker China Petrochemical Corporation Vocational Skills Assessment Guidance Center 2008 Edition │ Energy Power Equipment Design Editor-in-Chief Wang Chunhua ； Ma Danzhu, deputy editor Pan Haodan 2017 edition│ Ship power station and electric drive│ Gezhouba Engineering Series No. 9 - Hydrogenerator│ Steam generator 418 │ Thermal storage technology and its application 367 │ Design of coal-electricity linkage 2014 edition│ Practical technology design, construction, installation, operation and maintenance of tubular hydrogenerator units 2010 edition│ Practical technical design, construction, installation, operation and maintenance of tubular turbine generator units, 2010 edition │ Current status and development of supercritical and ultra-supercritical power generation technology │ Start-up and operation of supercritical pressure 600MW units (book) │ Supercritical pressure thermal power generation technology │ Basics of electrical theoretical analysis of superconducting generators (new theory of AC motors) │ Ultra-supercritical unit control equipment and systems │ Ultra-supercritical thermal power unit series Thermal Automation edited by Zhang Hua and Sun Kuiming 2012 edition │ Ultra-supercritical thermal power unit training series textbook fuel and environmental protection volume edited by Xu Hongjian 2012 edition │ Ultra-supercritical thermal power unit training series textbook electrical volume edited by Gao Liang 2012 edition │ Learn to repair diesel generator sets easily 2008 │ Coal handling system and equipment 300MW cogeneration unit technical series 339 │ Centralized operation 2015 │ Wind and solar hybrid power generation application technology │ Wind and solar power generation technology │ Wind and solar farm equipment inspection and maintenance standardization manual edited by Dong Xiaobo, Chen Weiyong, Ding Ding 2016 edition │ High voltage generator fault analysis and operation protection technology 2012 │ Efficient Renewable Distributed Power Generation System 2010 Edition│ ├─9.0 Papers on Power Generation, Power Plants and Generator Equipment│ Application of 0.1Hz ultra-low frequency withstand voltage test device in generator withstand voltage test│ Fault-tolerant design and configuration of 1000MW generator transformer set protection│ Configuration and selection of 1000MW generator set protection│ Preliminary analysis and calculation of inverter demagnetization of 1000MW synchronous generator│ 1000MW turbine generator stator winding temperature monitoring and troubleshooting │ Diagnosis and analysis of 1000MW turbine generator rotor winding inter-turn short circuit fault │ Research on 24, 26kV insulation technology of 1000MW turbine generator set │ Development of 1000MW turbine generator stator coil mold │ 1000MW ultra-supercritical generator set fault analysis and treatment │ Control of hydrogen purity of 1000MW ultra-supercritical unit generator│ Fault diagnosis of lubricating oil system of 1000MW ultra-supercritical turbine generator unit│ Stability of shaft system of 1000MW ultra-supercritical turbine generator unit│ Analysis of type selection and current situation of 1000MW ultra-supercritical air-cooled generator unit│ Analysis of causes of stator winding accident of 100MW turbine generator│ 1089 Research and application of RB test of t/h circulating fluidized bed generator set│ 1100MW internal water-cooled turbine generator stator winding voltage test analysis│ Process research on 1100MW nuclear energy turbine generator rotor dynamic balance overspeed│ Analysis of the impact of 110kV power grid system failure on the generator set│ 1150MW nuclear power turbine generator rotor coil quality inspection control and management│ Analysis and treatment of causes of 1150MW nuclear generator rotor turning and immobility │ 1150MW nuclear generator rotor assembly process │ 1204 tractor generator built-in regulator replacement │ 125MW generator accident analysis and treatment │ 125MW generator slip ring heating failure analysis and treatment │ 125MW generator rotor water circuit leakage analysis and prevention │ 12MW turbine generator system optimization and transformation │ Inspection and treatment of 135MW and 330MW air-cooled generator rotor grounding faults │ Technical transformation of 150kW standby generator heating device and self-starting device │ Analysis and treatment of vibration causes of 150t CDQ waste heat 25MW turbine generator set │ 15MW generator rotor burnout analysis │ 1750 MW nuclear generator manufacturing process │ 1750 MW nuclear generator rotor assembly process │ 1750 MW nuclear power generator welding manufacturing process │ 1750 MW nuclear power generator stator core pressure loading technology │ 180 MW hydro-generator unit power measurement abnormality analysis and preventive measures │ 195 MW pulse generator cooling system analysis │ 1 GW ultra-supercritical coal-fired power generation unit participation in power grid peak load response performance analysis │ Summary of modification and operation of 1×50MW extraction condensing turbine generator unit to 1×40MW back-pressure unit│ Analysis and treatment of generator vibration failure of 200 MW unit│ 2006 BMW 320i generator failure│ Analysis of causes of tripping of generating units in Shanghai in 2009 and prevention suggestions│ Analysis of causes of stator grounding protection action of 200MW hydrogenerator│ The indicator light of the 2011 Magotan B7L generator is on │ Analysis of the causes of tripping of the generator set during the peak summer season of 2015 │ Application of 20Hz injection stator grounding protection in the extended unit wiring generator set │ Causes and treatment of overheating of the external secondary line casing of the 210MW generator │ Analysis and treatment of vibration of the 210MW turbine generator set │ Analysis and treatment of leakage of the internal cooling water system of the 220MW generator │ 25 Common faults and maintenance of MW generator carbon brushes and slip rings│ 25mw trt generator servo control system fault analysis and treatment │ 25MW condensing turbine generator set vibration fault diagnosis and treatment │ 25MW hydroelectric generator set rotor dynamic balancing treatment │ 25MW turbine generator system optimization and transformation practice │ 25MW turbine generator set vibration analysis and treatment measures │ Problem analysis and technical transformation of the electro-hydraulic regulating system of the 25MW turbine generator set │ On-site dynamic balancing debugging of the rotor of the 25MW turbine generator set │ Treatment of loose end windings and corona of the 2×150MW generator │ Analysis of the main building structure, turbine generator and coal mill basic design form of the 2×660MW unit │ Brief analysis of the structural design of the 2-pole explosion-proof generator │ Design features of the control system of the 30 MW biomass generator set │ Frequency conversion and energy-saving transformation of the circulating water pump in the heating network of the 300 MW heating generator set │ Operation optimization of the circulating water system of the 300 MW heating generator set │ Research on the air flow characteristics in the stator core of the 300 MW double water internally cooled turbine generator │ Discussion on the optimization of the internal cooling water system of the 300 MW generator │ Analysis and treatment of the overheating causes of the excitation slip ring of the 300 MW generator │ Problems and countermeasures in the sealing oil system of 300MW generators │ Analysis and improvement of excessive hydrogen humidity and oil inflow in 300MW generators │ Treatment of low insulation problem of water collection pipe at the end of 300MW generators │ Practical analysis of grid-connected phase operation of 300MW generators │ Analysis of causes of burnt damage of 300MW generator rotor slip ring │ Analysis and preventive measures of burnt damage of 300MW generator rotor collector ring │ Improvement of the internal cooling water treatment method of the 300MW unit generator│ Treatment of thrust oil tank leakage of the 300MW hydrogenerator unit│ Analysis and calculation of the d-axis magnetic field of the 300MW turbine generator│ Analysis and treatment of the stator grounding fault of the 300MW turbine generator│ Repair of the 300MW turbine generator fault│ Analysis and treatment of the grounding fault of the 300MW turbine generator manifold│ Analysis and treatment of vibration faults of 300MW turbine generator set│ Improvement of oil system flushing scheme of 300MW turbine generator set│ Analysis and treatment of causes of sudden low-frequency vibration of 300MW turbine generator set│ Analysis and treatment of second-order mass unbalanced vibration of rotor of 300MW turbine generator set│ Causes and treatment of oil inflow of 300MW turbine generator set│ Analysis and treatment measures for causes of excessive SO2 emissions from 300MW coal gangue generator set│ Practice and exploration of 30MW generator access system│ Operation analysis of 3200MVA impact generator excitation control system│ Vibration modal test of stator winding end of 330MW generator│ Analysis and reflection on tripping accident of 330MW generator set│ Analysis of tripping fault during operation of 330MW generator│ Analysis and treatment of the causes of abnormal noise in the generator of 330MW unit│ Practice and analysis of non-stop control of 330MW turbine-generator unit│ Analysis and treatment of sealing oil system failure of 330MW turbine-generator unit│ Analysis and treatment of vibration failure of 330MW turbine-generator unit│ Analysis and treatment of shaft vibration failure of 330MW turbine-generator unit│ Practice of transformation of speed control system of 35 MW turbine-generator unit│ 350 Design optimization of low-voltage load shedding protection method for high-voltage turntable of MW generator set│ Analysis and treatment of vibration causes of 350 MW turbine-generator set│ Analysis and treatment of causes of abnormal hydrogen cooler of 350MW generator set│ Analysis and preventive measures of leakage reasons of sealing oil system of 350MW turbine-generator set 390H Generator Primary Stator Grounding Protection Action Processing│ 390H Generator Excitation System Energy Saving Analysis│ 390H Generator Rotor Conductive Screw Failure Analysis│ 390H Generator Primary Rotor Grounding Fault Analysis and Treatment│ 390H Generator Air Cooling Startup Method│ 400MW Full Hydrogen Cooled Generator Analysis and Treatment of Hydrogen Leakage Causes│ Experimental study on vibration of 500kV single-phase generator transformer under DC bias magnetization │ Search for defective wire bars of 50MW generator │ Treatment of loose stator core of 50MW hydrogenerator unit │ Analysis of abnormal magnetic poles of 50MW hydrogenerator rotor │ Analysis and treatment of abnormal vibration of 50MW turbine generator unit │ Analysis and troubleshooting of scaling causes of 50MW combined heat and power turbine generator unit l │ 55MW hydrogenerator rotor dynamic balancing test analysis │ Cause analysis and treatment measures for high interlayer temperature of stator bar of 600 MW generator │ Analysis and treatment of generator tripping accident of 600 MW supercritical unit │ AGC optimization of 600MW subcritical coal-fired turbine generator unit │ Search and treatment of one-point grounding fault of 600MW generator stator │ Abnormal analysis and countermeasures of 600MW generator stator bar outlet water temperature difference │ Analysis of reasons for high 600MW generator stator bar temperature │ 600MW generator stator winding DC resistance processing method │ 600MW generator stator core looseness detection and treatment │ 600MW generator load shedding causes analysis and countermeasures │ 600MW generator condenser installation process │ Welding of titanium tubes in the condenser of the 600MW generator set│ Renovation of the pipeline connection method of the hydrogen control system of the 600MW generator set│ Analysis and treatment of the causes of moisture in the isolated-phase closed busbar of the 600MW generator set│ Analysis of the causes and countermeasures for the low insulation absorption ratio of the 600MW generator set│ Analysis of inter-turn short circuit and grounding faults in the rotor of the 600MW generator│ Judgment of 600MW generator rotor winding inter-turn short circuit fault│ 600MW generator rotor winding inter-turn short circuit detection and treatment│ 600MW generator oil inflow cause analysis and countermeasures│ 600MW generator phase advance operation impact on system voltage│ 600MW unit generator stator cooling water abnormality cause analysis and treatment│ 600MW unit generator short circuit test analysis│ Find and deal with the leakage point of the stator coil of the 600MW hydrogen-cooled generator │ Treatment and preventive measures for hydrogen leakage in the 600MW hydrogen-cooled generator │ Analysis and improvement of the oil inlet problem of the 600MW hydrogen-cooled generator │ Discussion on the stator iron loss test method of the 600MW turbine generator │ Analysis and treatment measures for the reasons for the rapid decline in hydrogen purity of the 600MW turbine-generator unit │ Analysis and treatment of abnormal insulation of the water collection pipe of the 600MW turbine-generator unit │ Analysis and treatment of steam flow excitation failure of 600MW turbine generator set│ Analysis and improvement of 600MW turbine generator bearing centrifugal casting and shelling│ Analysis of reasons for oil inflow of 600MW turbine generator│ Comparison of ultra-low flue gas emission transformation plan of 600MW coal-fired generator set│ Analysis and comparison of power supply plan of 600MW coal-fired air-cooled generator set│ Chemical cleaning of the stator winding of the generator of the 600MW supercritical unit │ Development and design of the 60Hz full-speed turbine generator │ Analysis and calculation of the excitation current of the 60Hz turbine generator │ Adjustment of the ironmaking power supply system after the 60MW gas generator set is put into operation │ Analysis of the local repair process of the armature slip ring of the 630E main generator │ Repair of the armature pole coil of the 630E truck main generator │ Analysis and treatment of the causes of oil intrusion into the generator of the 640MW supercritical unit│ Partial transformation of the auxiliary facilities of the 6MW condensing steam turbine generator unit│ Installation technology of the stator of the 800MW giant fully air-cooled turbine generator│ Network-machine coupling simulation of the abnormal operating conditions of the 856MVA turbine generator│ Control and application of noise in the generator room of the 9000m drilling rig│ Energy-saving operation of the 9E gas-steam combined cycle generator unit│ 9E Combined Cycle Generator Set Quick Start Optimization Analysis │ 9FA Gas Turbine Generator Automatic Quasi-Synchronization Module Design │ 9FA Combined Cycle Generator Generator Hydrogen Leakage Cause Analysis and Treatment │ Discussion of 9F Class Single-Shaft Combined Cycle Generator Set Startup Control Strategy │ 9F Class Gas Turbine Generator Hydrogen and Sealing Oil System │ Localized Application of 9F Class Gas Turbine Generator Excitation System │ AP1000 nuclear power unit generator and transformer differential protection verification scheme │ Application of Benders algorithm in generator reactive power reserve management │ Vibration fault analysis of C12-3.43/0.981 turbine generator set │ Vibration fault analysis of C300 turbine generator set │ Vibration analysis and processing of C6-3.43/1.27 turbine generator set │ Practice of pure low calorific value blast furnace gas combustion in CCPP generator set │ Practice of reforming the runner room of No. 1 hydrogenerator unit of CH Power Plant │ Impact of CT saturation on generator longitudinal difference protection and preventive measures │ Application of DEH in Taigang 6MW back-pressure turbine generator set │ DQ_(45) type clamp-type truck end cover method to transport 1000MW generator stator test study │ Application research of EEMD-HHT method in doubly-fed induction generator stator inter-turn short circuit fault analysis │ Application of ELCID in turbine generator manufacturing and maintenance │ Application of FAST Gen generator remote detection system │ F-class gas turbine generator set air tightness test process optimization and improvement │ G3520 Application of C-gas internal combustion generator sets│ Analysis of the application of G60 generator inter-turn protection device in 600MW units│ HXN_Type 5 locomotive diesel engine generator set connecting rod cutoff analysis │ J-165 generator maintenance and troubleshooting │ Application of M251S combined cycle generator set in Taiyuan Iron and Steel Co., Ltd. │ Medium-pressure drum water level control of M701F combined cycle generator set │ Research on the application of Modbus protocol in diesel generator set monitoring system │ Analysis and improvement of MT5500 truck main generator starting failure causes │ Improvement of N125 turbine generator rotor return water support│ N600-24.2/566/566 turbine generator unit load shedding test analysis│ Generator unit remote fault diagnosis integrated with PCA and GA-PSO-RBF│ Research on PEMFC generator three-phase constant frequency constant voltage inverter scheme│ Application of PLC5 program in W121 generator unit fault handling│ Application of PLC in the automatic switching system of mains power supply and generator set │ Design of automatic monitoring system of DC generator set controlled by PLC │ Three-dimensional modeling and parameter series design of turbine generator stator winding in Pro/ENGINEER │ Application of PSL646U type optical fiber longitudinal difference protection in generator tie line │ Application of PSTA2003 online monitoring system in fault handling of large hydro-turbine generator set │ QFQS-200-2 turbine generator collector ring modification│ Analysis and countermeasures for abnormal fluctuations in QFR480 generator seal oil pressure│ Analysis and preventive measures for QFSN-300-2-20 generator outlet casing bursting│ RBF-NN diagnosis of generator rotor winding inter-turn short circuit│ Ruston TB5000 turbine generator set starting fault analysis│ S 109 Analysis of the causes of generator reverse power protection action of FA combined cycle unit │ Wiring improvement plan for generator voltage transformer of S109FA unit │ Solar turbine generator marine unit installation accuracy requirements and construction points │ SolidWorks lofting and unfolding turbine generator tailwater elbow │ SSSC and generator excitation optimal coordinated control │ Multi-index coordinated control of STATCOM and generator excitation │ Application of STO advanced control software on 600MW turbine generator set │ Development and application of STRT generator set│ TBФ-110—2E∏y3 type generator oil inflow problem and prevention│ Treatment of TRT generator excitation winding insulation reduction failure│ TRT generator start-up fault diagnosis and technical analysis│ TRT generator differential protection misoperation cause analysis and protection setting check and setting│ TRT generator rotating rectifier burnout reasons and countermeasures│ TRT generator set long-term allowable negative sequence current estimation│ TRT generator stator pressure cylinder blade repair process │ Analysis and countermeasures of common faults of TRT brushless excitation generator rotating rectifier disc │ Analysis of causes of UNS 3020 generator rotor grounding protection malfunction │ UPFC and generator excitation multi-index coordinated control design │ Application of UW600 in biomass generator sets │ Volvo Penta TAD1642GE—MJB355 generator set maintenance practice │ Analysis on the operation of WFBZ-01 microcomputer generator transformer set protection device │ Analysis of WK10 lifting generator failure │ Maintenance points of microcomputer excitation device of WKLF-51F generator │ Adjustment method of control circuit of diesel generator set for ZJ70D drilling rig │ Optimization design of environmental protection facilities of "three towers in one" coal-fired generator set │ Research on waste heat utilization of "Nanhai Endeavor" FPSO turbine generator │ A case of grid-connected fault analysis of a doubly-fed generator │ A case of cause analysis and treatment of generator stator grounding protection action │ An case of inspection and treatment of generator stator winding insulation anomalies │ An case of generator rotor intermittent grounding fault analysis │ An case of defect analysis and improvement of turbine generator relay protection │ Analysis and thinking of abnormal power consumption rate of a 600MW generator set │ Analysis and treatment of test-running vibration problems of a blast furnace gas turbine generator set │ A turbine design and test of an underground generator │ A method for accurately obtaining the original parameters of a salient pole synchronous generator │ A method for analyzing the identifiability of model parameters of a generator excitation system │ A new method for a generator stator winding flow test │ A method for calculating the power angle of a synchronous generator during phase-advancing operation │ A frequency control strategy for a power system with a doubly-fed generator │ An Internet-based real-time monitoring and control method for the generator excitation system│ A generator low-excitation limitation method based on impedance characteristics│ A research on slightly alkaline three-layer bed technology for processing generator constant cold water│ A method to improve the accuracy of brushless excitation generator rotor voltage measurement│ A research on an improved virtual synchronous generator control method│ A new simulated generator set excitation speed controller│ The development of a new energy-saving generator│ A new process method for finding the swing in the shafting system of a hydraulic turbine generator set │ A method for estimating torsional vibration fatigue damage of a shafting system of a turbine generator set │ A modeling and analysis of generator rotor grounding protection based on the combined principle │ A generator excitation control system that can output a large impulse current │ Analysis and treatment of a 600MW generator stator grounding accident │ A fault analysis of a generator trip caused by a fuse blowout │ Analysis of a generator set tripping accident caused by excitation system failure │ Analysis of an excitation overload alarm caused by an error in calculation of the generator protection setting │ Analysis and treatment of an oil leakage fault in the generator │ Analysis of a hydrogen explosion accident inside the generator │ Analysis of a generator excitation system mis-excitation accident │ Analysis of a generator transformer group protection action event Analysis of the cause of a generator stator grounding protection trip and countermeasures │ An analysis of a generator stator grounding accident │ An analysis of a generator stator burning accident and countermeasures Cause analysis and prevention of a generator overexcitation event │ Cause analysis and preventive measures of a generator oil intrusion accident │ Analysis of a domestic 350MW generator oil inflow event │ Handling of a large hydrogenerator stator winding grounding fault │ Analysis and handling of a small hydroturbine generator relay protection accident │ Analysis of the cause of resin entering the generator stator winding │ Cause analysis and handling of a hydroturbine generator excitation rectifier bridge thyristor breakdown event │ Comprehensive analysis and treatment of a demagnetization failure of a hydrogenerator unit│ Analysis and enlightenment of a special generator excitation failure cause│ Stable operation analysis of the Wanjiazhai hydrogenerator unit│ Optimization of the main protection configuration of the DFEM generator of the Three Gorges Right Bank Power Station│ Evaporative cooling simulation test technology of the 700MW turbine generator of the Three Gorges Underground Power Station│ Several technical issues of the excitation rectifier transformer of the hydroturbine generator of the Three Gorges Project left bank power station│ Technical progress of the giant turbine generator set of the Three Gorges Project │ Analysis of reverse power protection application of the turbine generator set of the Three Gorges Hydropower Plant │ Three Gorges turbine generator stator offline process technology │ Three Gorges turbine generator stator core installation technology │ Sanliping water conservancy project generator set selection and design │ Analysis of the reasons for tripping of the generator set in Shanghai in 2014 │ Comparative study of large disturbance characteristics and transient stability of different generator models │ Research on optimal control when diesel generator sets of different capacities operate in parallel │ Application of grid-connected technology for high-power generator sets for different types of drilling rigs │ Analysis of doubly-fed induction generator rotor voltage under asymmetric faults │ Analysis of the development prospects of China's supercritical power generation technology │ Analysis of solutions for excitation and demagnetization circuits of small and medium-sized generator sets │ Hazards of two-phase operation of small and medium-sized hydroelectric generators │ Application of integral yoke laminated structure of small and medium-sized hydrogenerator rotors │ Design of excitation control system of small and medium-sized turbine generator sets │ Analysis and treatment of rotor insulation fault of Lechangxia 3^# generator │ Application research of online monitoring system of Lechangxia hydrogenerator set │ Installation process of 100MW hydrogenerator set of Yunnan Honghe Madushan Hydropower Station │ Downhole generator turbine design, power simulation and performance test │ Downhole external magnetic rotor turbine generator design and test research │ Downhole turbine generator turbine modeling research │ Coupled magnetic field analysis of the magnetic transmission mechanism of underground turbine generators│ Analysis and experiments of underground turbine generator system characteristics│ Design and working characteristics analysis of underground measurement-while-drilling turbine generators│ Research on automatic monitoring system of wellsite generator electrical efficiency│ Research and design of AC excitation generator excitation power supply│ Modeling and simulation of AC excitation generator vector control excitation system│ Preliminary discussion of claw pole side angle for alternator│ Analysis of several problems during the trial installation of the alternator│ Research on the maximum torque-to-current ratio control of the AC synchronous generator│ Calculation of the damping torque coefficient of the synchronous generator during the transient process of the AC and DC power system│ Fast algorithm for generator fault voltage stability assessment in the AC and DC system│ Monitoring technology and application of the air gap of the generator in the Tingzikou Water Conservancy Project│ Installation of the relay of the hydro-generator unit of the Tingzikou Water Conservancy Project│ Discussion on the selection, design and main technical issues of the hydraulic generator set of the Tingzikou Hydraulic Junction Power Station │ Civil air defense project load calculation and diesel generator selection │ Discussing the capacity selection of diesel generator sets from a set of registration examination cases │ The importance of the "Twenty-five Countermeasures" from the perspective of generator unsafe events │ Exploration of the grid connection method of enterprise waste heat generator sets │ Research and application of optimizing steam system operation to improve the efficiency of generator sets │ Circulation analysis of low-voltage high-power synchronous generators │ Selection of circuit breaker at the outlet of low-voltage diesel generator │ Design of low-noise diesel generator room │ Waste heat power generation technology │ Analysis and treatment of damage to main oil pump of waste heat generator set │ Using DVR and Crowbar to improve low-voltage ride-through capability of doubly-fed generator │ Disassembly and assembly of rotor guard ring technology of Russian TBФ-120-2 and TBM-160-2 series turbine generators │ Analysis and treatment measures for the failure of the generator cooler temperature probe of Xiushan Power Station │ Application of advanced control theory in the synchronous generator speed control system │ Application of optical fiber temperature measurement in large hydroelectric generators │ Research on full dry dust removal and residual pressure power generation technology solutions │ Search and treatment of a 600MW generator rotor point ground fault Discussion on on-site search methods for stator winding grounding of hydro-generator units │ Diagnosis and treatment of vibration faults of turbine-generator units with staggered vibration trends │ Research on current sharing technology of self-shunt excitation devices of synchronous generators with redundant design │ Development of linear generators with magnetic damping function │ Influence of the shape of the built-in permanent magnet generator's magnetic isolation bridge on cogging torque │ Experimental research on phase-advancing operation of generator units in the western Inner Mongolia power grid │ How to deal with the sweep accident of the turbine generator of Fengjiashan Level 1 Power Station│ Vibration prevention and control of the turbine generator set of Fengjiashan Hydropower Station│ Installation and daily maintenance technology of impact turbine generator set│ Casting process design of impact turbine generator runner│ Implementation of triple redundancy control technology of condensing steam generator set│ Discussion on the implementation strategy of small island operation (FCB) of export generator set│ Optimal configuration of distributed generators in the distribution network│ Analysis and comparison of control strategies for virtual synchronous generators in distributed power generation │ Application of split-phase insulated copper tube busbars in the outlet circuit of small and medium-sized hydroelectric generators │ A brief discussion on the grounding application of bias magnetic arc suppression coils at the neutral point of generators │ Use ANSYS to calculate and analyze the critical speed of the hydrogenerator shaft system │ Use EXCEL to calculate and draw the V-shaped curve of salient pole synchronous generators │ Use UG software to perform parameterized design of the stator sectors of the hydrogenerator │ Use feedforward control to achieve stable operation of waste heat generators│ Use the parameter identification of synchronous generators after excitation voltage disturbances│ Use the factory power supply to conduct primary flow tests of generators and improve inspection methods│ Use the reactive power output of the generator set to adjust the total power factor of the substation│ The preliminary idea of using organic Rankine cycle generators to recover waste heat from waste gas│ Use on-site dynamic balancing instruments to perform on-site dynamic balance correction of hydro-turbine generator sets│ Buick car series generator control system analysis and maintenance methods │ Drill bits for processing thin conductive sheets of generators │ Strengthening the installation management of turbine generator sets to effectively reduce the impact on unit vibration │ New ways to speed up the installation speed of hydraulic generator sets │ Application of excitation systems in residual energy recovery synchronous generator sets │ Analysis of reasons for generator stator overload tripping caused by excitation system faults │ Treatment of magnetic pole deformation and loose stator core of Beixi Hydropower Station generator │ Research on reduced-order equivalent model of twelve-phase synchronous generator │ Analysis and processing of false alarms for rotor grounding protection of half-speed nuclear energy generator │ Design of ash and slag removal system for Huaneng Weihai Phase III 2×660MW generating unit │ Influence of cooperative optimization on the operation stability of axial flow rotor turbine generator unit │ Analysis and treatment of vibration causes of single-cylinder single-rotor 150MW steam turbine generator set│ Installation technology of variable frequency generator set at Siyang Station of South-to-North Water Diversion Project│ Research on factory drag test of horizontal turbine generator│ Causes and treatment methods of slip ring ablation of horizontal turbine generator│ Analysis and treatment of causes of high bearing temperature of horizontal Francis turbine generator set│ Research and application of generator stator hoisting technology for 6×600MW unit of KMPCL power plant in India │ Parameter matching design and working process simulation of compression ignition free piston linear generator │ Double-circuit single-circuit outlet power supply mutual backup transformation │ Research on safe operation strategy of double extraction condensing steam generator set │ Operation stability analysis of double-row layout single unit capacity 400MW hydro-generator unit │ Analysis of causes of leakage of double-water internally cooled turbine generator rotor and preventive measures │ Analysis of the reasons for the decrease in hydrogen purity of double-flow ring seal oil generators│ Analysis of sudden short circuit on the AC side of double-winding generators with load on the DC side│ Experimental research on excitation fuzzy control of doubly-fed generators│ Troubleshooting of stator lead wires of doubly-fed generators│ Principle of stator flux phase angle deviation compensation of doubly-fed generators│ Research on transient characteristics of single-phase ground fault of doubly-fed asynchronous generators│ Research on operating status of converter at synchronous speed of doubly-fed asynchronous generators│ Research on hysteresis vector control strategy of doubly-fed induction generator│ Diagnostic measures for doubly-fed induction generator stator turn-to-turn short circuit fault│ Electromagnetic characteristics when doubly-fed induction generator stator winding short circuit│ Handling of abnormal starting of diesel generators in power plants│ Transformation of control loops of diesel generators and unit security sections in power plants│ Analysis of reasons for generator 3ω stator grounding protection action and preventive measures│ Analysis and treatment of abnormal generator V-phase voltage│ Generator, transformer and busbar protection │ Causes and preventive measures of generator upper conductor burning accident │ Analysis of generator incomplete differential malfunction │ Calculation method of short-circuit resistance and short-circuit reactance of generator neutral point grounding transformer │ Generator neutral point grounding mode selection analysis and calculation │ Analysis of generator neutral point zero sequence voltage changes causing tripping │ Generator neutral point zero sequence voltage abnormality processing and analysis │ Analysis of problems related to generator series reactors │ Treatment after generator accidents │ Analysis and preventive measures for malfunction of generator low-excitation loss protection stage III Measurement method and application of potential phase angle and power angle in the generator │ Analysis of shutdown accidents caused by leakage of cooling medium in generator │ Analysis of three-phase voltage imbalance to ground caused by generator outlet TV failure │ Research on generator outlet circuit breaker and backup power supply connection method │ Analysis of generator outlet circuit breaker tripping monitoring circuit │ Analysis of the reasons why the secondary side disconnection of the generator outlet voltage transformer caused the compound voltage overcurrent protection action │ Analysis of the causes of excessive harmonic voltage at the generator outlet│ Analysis and treatment of the causes of hydrogen leakage from the generator outlet cover│ Improved design of the generator brake│ Analysis of the causes of gas turbine tripping caused by abnormal generator power due to over-temperature Analysis and treatment of open circuit of generator excitation current transformer │ Discussion of generator excitation power supply problems │ Analysis and prevention of generator excitation carbon brush overheating │ Analysis of uneven current flow phenomenon in generator excitation system │ Effect of low excitation limit of generator excitation system on phase progression depth │ Generator excitation system low excitation limit test and accident prevention measures │ Analysis of generator excitation system power cabinet current sharing problem │ Generator excitation system intelligent current sharing status and problem analysis │ The influence of generator excitation system model and parameters on regional power grid stability analysis │ Cause analysis and treatment of generator excitation system short-circuit fault │ Research on application of remote monitoring and diagnosis of generator excitation system │ Research on improvement scheme of generator excitation winding one-point grounding protection │ Analysis of 2 faults of generator excitation regulator │ Causes and treatment of repeated alarms of generator excitation regulator │ Analysis of causes of generator inter-turn protection malfunction tripping accidents │ Discussion on the principle of double-ended injected rotor one-point grounding protection of generator and loop defects │ Programmed trip shutdown method and protection configuration in generator transformer group protection │ Analysis and treatment of reasons for low insulation of closed busbar of generator transformer group │ Application of generator synchronous grid connection technology in oil drilling rigs │ Generator synchronous grid connection technology characteristics │ Generator synchronous system test and grid connection process analysis │ Generator starting test intelligent testing technology │ Generator backup excitation regulator excitation tracking curve test method │ Research on the equivalent contact reactance Analysis of the causes of the generator's loss of load and load protection protection│ Analysis and treatment of the causes of the generator's loss of excitation│ Analysis of the effects of the generator's loss of excitation and its treatment examples│ Analysis and treatment of the causes of low generator constant cooling water flow│ Analysis and treatment of the causes of high hydrogen content in the generator's constant cooling water system│ Analysis and treatment of generator stator B-phase grounding faults│ Research on the quality process of generator stator punching and painting│ Discussion on treatment measures for generator stator cooling water│ Analysis of the causes of high total hydrocarbons in generator stator cooling oil│ Research on online monitoring of generator stator single-phase ground fault resistance│ Analysis and improvement of generator stator ground protection outlet failure│ Generator stator ground protection action analysis and preventive measures│ Generator stator ground protection action cause analysis and troubleshooting│ Generator stator ground protection action examples and analysis│ Generator stator ground fault cause analysis and treatment measures│ Resonance analysis and measures caused by generator stator ground fault │ Generator stator ground fault search and treatment │ Simulation analysis of generator stator water-cooling steady state │ Discussion of low-voltage shielding method in generator stator leakage test │ Remedy measures for generator stator temperature measurement components aging │ Generator stator traction system improvement │ Generator stator silicon steel sheet slipping out reason analysis and treatment │ Generator stator core screw rod damage reason analysis and treatment │ Treatment of the insulation box falling off at the end of the generator stator │ Analysis, treatment and preventive measures of generator stator coil sinking │ Analysis of the treatment process of generator stator bar Analysis and treatment of breakdown causes of generator stator winding AC withstand voltage test │ Analysis of single-phase grounding protection action of generator stator winding │ Examples of finding and handling ground faults in generator stator winding │ Analysis and treatment of water leakage faults in generator stator winding │ Analysis of inter-turn protection of generator stator windings │ Determination of excessive DC resistance of generator stator windings and treatment of excessive tolerance parts │ Defect analysis and treatment of generator stator winding end vibration online monitoring device │ Modal characteristics and treatment of generator stator winding end defect modal characteristics and treatment │ Generator stator winding bar insulation breakdown failure analysis │ Analysis of common problems with insulation materials in generator stator insulation boxes │ Design and application of special generator stator lifting devices │ Discussion of winding grounding issues in generator stator iron loss test │ Experimental research on modal vibration characteristics of generator stator core │ Analysis and treatment of high generator seal oil level alarm │ Analysis and treatment of the reasons for the drop of oil level in the generator seal oil tank │ Analysis and treatment of common faults of the generator seal oil system │ Analysis and countermeasures of oil shock failure of the generator seal oil system │ Transformation and application of the generator seal oil system │ Application of generator local discharge online monitoring device in power plants │ Electro-acoustic joint detection of generator partial discharge │ Analysis of the causes of generator differential protection malfunction and its lessons learned │ Generator parallel impulse current analysis and synchronous locking relay setting │ Analysis and treatment of generator abnormal noise and rotor one-point grounding phenomenon │ Research on the application of generator microcomputer protection technology │ Application of generator microcomputer automatic quasi-synchronous device │ Generator microcomputer loss-excitation protection malfunction analysis and countermeasures after transformation │ Abnormal operation and accident handling of generator or primary system │ Analysis and improvement of long hydrogen filling time when generator is put into hydrogen │ Generator vibration fault and status monitoring │ Analysis of generator grounding protection methods and problems │ Discussion of generator water cutoff protection action exit delay │ Discussion of generator circuit breaker failure protection criteria │ Selection and application of protective capacitors for generator circuit breaker │ Generator brushless excitation system rotating rectifier monitoring method and its applicability analysis │ Generator reactive power impact cause analysis and countermeasures │ Generator reactive power swing cause analysis │ Analysis and troubleshooting of the reasons why the generator cannot be excited│ Statistical analysis of generator transient overvoltage│ Analysis and treatment of causes of generator mechanical vibration│ Analysis and countermeasures of causes of generator unit reactive power output fluctuations│ Evaluation of generator model and parameter dynamic simulation accuracy│ Generator forward low power and reverse power protection configuration and setting│ Analysis of reasons for hydrogen leakage from the end cover flange of the generator hydrogen cooler and countermeasures│ Analysis and treatment of the main reasons for large changes in hydrogen humidity in generators│ Analysis and treatment of the causes of high hydrogen humidity in generators │ Research and analysis of generator hydrogen humidity problems │ Causes and treatments of high hydrogen humidity in generators │ Troubleshooting of leaks in generator hydrogen systems │ Analysis and treatment of causes of decrease in hydrogen purity in generators │ Analysis and treatment of causes of decrease in hydrogen purity in generators │ Analysis and treatment of causes of low hydrogen purity in generators │ Analysis and preventive measures of causes of increased hydrogen dew point in generators │ Operation analysis when the generator does not have non-full-phase protection│ Analysis and countermeasures of causes of shutdown caused by high generator temperature│ Analysis and treatment of generator slip ring heating│ Causes and preventive measures of generator slip ring heating│ Causes and countermeasures of high generator slip ring temperature│ Analysis and treatment of causes of generator slip ring brush heating│ Analysis and treatment of reasons for generator hydrogen leakage│ Improvement of generator demagnetization and rotor overvoltage protection│ Introduction to the pulley with built-in one-way clutch for generators│ Block dimensionality reduction algorithm for steady-state power flow control represented by generator power│ Causes and treatments of generator oil dump│ Research and development of generator voltage fluctuation signal analysis system│ Generator vehicle control strategy simulation research│ Design of 24-phase rectifier transformer for generator direct power supply│ Analysis and preventive measures of abnormal phenomena in generator DC withstand voltage test│ Analysis and treatment of generator carbon brush failure causes│ Troubleshooting and preventive measures for generator carbon brushes│ Analysis and solutions for the reasons why the generator magnetic center line cannot be adjusted│ Computer model and optimization of converting generator offline dew point into hydrogen pressure dew point│ Analysis and countermeasures for the drop in generator airside seal oil pressure│ Effect of generator air gap on transverse differential current│ Analysis and treatment of generator terminal voltage reduction failure phenomenon│ Analysis and solutions to common problems of generator set DCS│ Analysis of the cause of EH low oil pressure failure of the generator set│ Static simulation test and configuration optimization of the generator set RB│ Comparison of "water cooling" and "air cooling" technical solutions of the generator set│ Primary frequency regulation test and application of the generator set│ Analysis of the accident shutdown case of the generator set│ Analysis and treatment of vibration fault of the exciter of the generator set│ Discussion on optimization of the double cold water protection logic of the generator set│ Research on the reliability of the generator set│ Analysis of the hazards and countermeasures of the demagnetization phase-in operation of the generator set│ Analysis and countermeasures of the operation of the generator set island│ Embedded remote condition monitoring and diagnosis analysis system of the generator set│ Analysis and treatment plan of the poor commutation fault of the generator set│ Design of the wireless radio frequency monitoring system of the generator set│ Analysis and treatment of frequent twitching of the generator set blades│ Overview of the whole process management of the generator set maintenance project│ Tracking and application of the generator set analog control system│ Design of special fixture for finishing cylinder head valve of generator set│ Economic and technical analysis of oil and gas dual-fuel transformation project of generator set│ Research on efficiency improvement and transformation of seawater desulfurization system of generator set│ Discussion on technical conditions and fault countermeasures of temperature measurement RTD for generator set│ Analysis of failure of electro-hydraulic servo valve of generator set│ Analysis of causes of carbon brush failure of generator set│ Analysis of causes of flashover of isolated phase closed bus of generator set and characteristics of its protection devices│ Fault analysis and treatment of vertical circulating water pump motor of generator set│ Improvement of relay protection scheme after using silicon controlled excitation system of generator set│ Cleaning of oil contamination in generator windings and measures to prevent oil leakage│ Causes and treatment measures of generator insulation degradation│ Research on generator insulation damage monitoring and diagnosis methods│ Development and application of generator insulation fault partial discharge monitoring system│ Analysis of harmonic characteristics of generator self-parallel excitation static excitation system│ Selection of generator battery starter circuit wires │ Research and practice of demagnetization protection methods in generator test stations │ Generator voltage regulator fault detection technology │ Generator regulator brush holder assembly design │ Generator rotor one-point grounding protection system configuration and application research │ Generator rotor one-point grounding protection malfunction analysis and treatment causes │ Generator rotor one-point grounding protection problem discussion │ Generator rotor one-point grounding fault handling │ Thoughts on operation after the generator rotor is grounded│ Analysis and suggestions for generator rotor grounding protection│ Analysis and solutions for reasons why generator rotor grounding protection frequently exits operation│ Generator rotor grounding fault analysis and preventive measures│ Safety and technical analysis of generator rotor grounding burnout faults│ Generator rotor fault cause analysis and processing│ Generator rotor magnetic pole withstand voltage test discharge cause analysis and processing│ Analysis and search methods for one-point grounding accidents in generator rotor windings│ Search for dynamic disconnection locations of generator rotor windings│ Search and repair of generator rotor winding short circuits to ground│ Discussion on test methods of generator rotor overvoltage protection devices│ Analysis and treatment of causes of generator bearing overtemperature│ Formation and measurement methods of generator shaft voltage│ Relationship between generator shaft current and load properties│ Analysis of causes of generator overexcitation protection malfunction│ Analysis of the causes of oil ingress and preventive measures in the generator│ Analysis of the causes of oil ingress and preventive measures in the generator│ Analysis of the phase-advanced operation of the generator│ Research status and prospects of the phase-advanced operation of the generator│ Analysis and on-site treatment of generator collector ring and carbon brush burning accidents│ Analysis of rapid protection scheme for generator static excitation system faults│ Analysis and treatment of excitation faults caused by non-full-phase operation of the generator│ Analysis and treatment countermeasures of non-synchronous grid-connected accidents of generators│ Research on generator nonlinear optimal coordinated control │ Transformer installation and operation 8 │ Introduction to 7500KVA generator set for transformer test │ Reversible water pump turbine generator rotor assembly process │ Analysis of Sibu generator excitation control system │ Summary of operation of new ammonia synthesis unit steam turbine generator set │ Calculation of differential protection setting value of No. 1 generator of Hunchun Laolongkou Power Station in Jilin Province │ Design of synchronous generator cloud model excitation controller │ Quasi-synchronous parallel behavioral control model of synchronous generator │ Synchronous generator excitation and STATCOM nonlinear coordinated control │ Research on intelligent PID control simulation of synchronous generator excitation system │ PID control simulation of synchronous generator excitation system │ Overview of synchronous generator parameter identification methods │ Synchronous generator multi-step predictive self-correcting excitation regulator │ Discussion of synchronous generator demagnetization asynchronous operation │ Analysis of synchronous generator demagnetization operating state │ Research on time-phase identification of practical parameters of synchronous generator │ Simulation study of synchronous generator fault transient in phase coordinate system │ Design of synchronous generator digital excitation control system │ Time domain model and transient calculation of synchronous generator rectification system │ Evaluation of synchronous generator model parameter importance level │ Application of synchronous generator model in MMC grid-connected control │ Research on the impact of synchronous generator air gap on its stability and active power │ New excitation system of synchronous generator │ Research on the absolute internal potential angle measurement method of synchronous generator │ Characteristic transfer rules of inter-turn short circuit fault of synchronous generator rotor winding │ Energy-saving test method of zero work characteristics of synchronous generator │ Installation test and improvement of stator winding of Xiangjiaba giant generator │ Stator magnetization test of Xiangjiaba giant hydrogenerator │ Quality control of rotor magnetic pole mounting of Xiangjiaba giant hydrogenerator │ Some experiences worth learning from in the design of Xiangjiaba hydrogenerator set│ A brief analysis of the installation of hydrogenerator set in Silong Power Station│ Installation and debugging of domestic 1000MW turbine generator│ Microcomputerized transformation of domestic 200MW generator transformer set protection│ Domestic 300MW generator phase operation test│ Energy-saving transformation of domestic 600MW unit generator excitation brush holder│ "Near-zero emission" transformation of domestic 600MW supercritical coal-fired generator set │ FCB test research of domestic 660MW supercritical generator set │ Double-frequency fault analysis of shafting of a domestic combined cycle 320MW turbine generator set │ Non-destructive testing of alloy bearings of turbine generators in service │ LabVIEW-based refrigerated marine generator set performance test control system │ Finite element analysis of turbine generator flange connection based on ANSYS Workbench │ Electromagnetic analysis based on ANSYS permanent magnet synchronous generator │ Synchronous generator excitation control system design based on AT89C51 │ Diesel generator operating parameter monitor based on AT89C52 │ Weak information extraction method of flue gas generator set status characteristics based on Birg6-Massart threshold │ Generator set automatic control device based on CAN bus │ Simulation research on comprehensive control of turbine generator speed and terminal voltage based on DMC │ Research on semi-controlled rectification technology of permanent magnet gasoline generator based on dsPIC │ Generator voltage disturbance acquisition system based on DSP │ Research on new diesel generator excitation control system based on DSP │ Design of automatic grid connection module of diesel generator control system based on DSP │ Development of AC excitation control system for high head impact turbine generator set based on DSP │ Inter-turn short circuit fault harmonic current detection method of salient pole synchronous generator based on Duffing system │ Synchronous generator parameter identification method based on EM-KF │ Discussion on short-circuit test of hydrogenerator set based on EXC9000 excitation system │ Structural improvement of hydrogenerator upper frame based on FEM │ Simulation design of oil well downhole generator impeller based on Fluent │ Structural optimization design of turbine generator base based on GA │ Generator unit paralleling and load distribution control system based on GCP31 module │ Generator excitation and TCSC coordinated control based on Hamilton energy function│ HSE-based diesel generator retrofit measures│ Hydrogenerator speed test system based on LabVIEW│ Matlab-based small and medium-sized explosion-proof synchronous generator armature tooth magnetic density correction method│ MATLAB-based generator rated reactive load rejection simulation test analysis│ Modeling and simulation of DC-DC converter based on PEMFC generator│ Research on online parameter identification of synchronous generator based on PMU│ Optimization design of hydraulic generator load frame based on Pro/Mechanica │ Effect of generator saturation on low-frequency oscillation based on PSSE │ Wave recording performance test of generator power transmitter based on RTDS │ Development of impact generator set control system based on S7-300 │ Development of hydraulic generator set virtual training system based on SolidWorks │ Modeling and simulation research of doubly-fed generator based on SVO │ DEH system control application of small and medium-sized steam turbine generator sets based on T80 │ Vibration analysis and processing of 660MW turbine generator sets based on TDM system │ Generator hydrogen data management system based on VB │ Implementation of virtual installation of hydraulic generator sets based on VRML-Java │ Design of primary frequency regulation online monitoring and assessment system of generator sets based on WAMS │ Design of vibration monitoring system of hydraulic generator sets based on WSNs │ Design of hydraulic generator online monitoring system based on WSN technology │ Development and application of generator temperature monitoring based on "sequencing method" │ Generator rotor winding inter-turn short circuit fault diagnosis based on artificial neural network │ Research on vibration prediction of hydraulic generator set based on artificial neural network │ Nonlinear excitation control of synchronous generator based on deviation separation │ Maximum power tracking control of direct-drive permanent magnet generator set based on power feedback │ Research on synchronous generator excitation based on variable domain fuzzy PID control │ 基于可靠度计算的飞机发电机健康状态评估│ 基于同步发电机方程的微网逆变电源控制策略│ 基于同步发电机模型的微网逆变器控制仿真研究│ 基于声检测法的大型发电机定子槽楔松动判据分析│ 基于大数据的燃气-蒸汽联合循环发电机组远程能效诊断系统│ 基于定子侧新型Crowbar的双馈发电机低电压穿越研究│ 基于实测数据的发电机调速系统参数辨识方法│ 基于导纳特性的发电机失磁保护整定与调试│ 基于小型发电机的碟式太阳能热发电技术研究进展│ 基于小波神经网络的无刷同步发电机旋转整流器故障诊断研究│ 基于广域信息的发电机电压控制抑制区间低频振荡方法│ 基于广域测量系统的发电机强励控制方案│ 基于开架式柴油发电机的车载供电系统设计│ 基于快速终端滑模的永磁同步发电机控制研究│ 基于支持向量机的发电机匝间转子绕组短路故障诊断│ 基于改进Kendall-f算法的发电机定子温度分析│ 基于改进型LOEC的同步发电机扰动下的最优励磁控制系统│ 基于故障树分析法的发电机组频率不稳故障解决│ 基于数据融合的开关磁阻发电机故障诊断研究│ 基于新型发电机定子模型的绝缘安全分析│ 基于无模型PID柴油发电机调速器的研究│ 基于无源性的发电机励磁和TCSC协调控制│ 基于有限元法的汽轮发电机V形曲线计算及应用│ 基于有限元的发电机U型架结构动力特性分析│ 基于有限元的发电机轴销孔镶套应力计算│ 基于果蝇算法的BP神经网络对双馈异步发电机绝缘寿命预测研究│ 基于柔性印刷电路板技术的纳米发电机│ 基于模糊免疫PID控制的发电机励磁控制器的优化研究│ 基于模糊免疫算法的汽轮发电机组OPC控制│ 基于模糊协调控制策略的同步发电机励磁系统研究│ 基于汽轮发电机组调速系统抑制次同步振荡的研究│ 基于混合算法和PMU数据的发电机励磁参数辨识方法研究│ 基于滑模变结构控制的余热发电机机组励磁控制研究│ 基于特征建模的汽轮发电机转子参数化设计│ 基于瑞萨H8∕3687的小型发电机逆变电源的研制│ 基于电磁场有限元方法的大型发电机定子槽绝缘故障诊断分析│ 基于电网接口虚拟同步发电机的控制方法研究│ 基于目标全息反馈的STATCOM与发电机励磁的多目标非线性协调控制│ 基于直接电流控制的永磁同步发电机控制研究│ 基于磁场定向的永磁同步发电机功率控制│ 基于空载误强励灭磁对发电机过电压保护整定的研究│ 基于统一模型的发电机励磁系统聚合方法研究│ 基于自顶向下的水轮发电机组参数化设计方法研究│ 基于虚拟仪器技术的发电机局部放电在线监测系统│ 基于虚拟仪器的某型变频发电机组测试系统设计│ 基于虚拟仪器的水轮发电机组三维全息谱分析│ 基于虚拟同步发电机的微电网控制方法研究│ 基于观测器的发电机功角和未知输入估计│ 基于超声波传感器的发电机局部放电检测│ 基于软开关技术的大型发电机灭磁系统改进│ 基于辨识和留数的发电机广域附加阻尼控制器设计│ 基于适用于大中型水轮发电机组的单波纹弹性油箱有限元计算│ 基于量热法的大型水轮发电机损耗测量和效率计算│ 基于钒流电池储能的虚拟同步发电机控制策略│ 基于集成电路式电压调节器发电机的原理及故障检测│ 基于青智8961F2的计算机控制500kW柴油发电机组负载测试系统│ 基于静止同步发电机技术的逆变器负序无功控制方法│ 基于非线性预测控制算法的发电机励磁与快速汽门协调控制│ 备用柴油发电机顺序带载器在重水核电厂的应用实践│ 多功能校验仪在燃机发电机转速控制中的应用│ 多失效模式水轮发电机组非线性振动可靠性模型│ 多段结构水轮发电机组轴系调整研究及应用│ 多路负载特性同步发电机的研究与设计│ 大中型燃煤发电机组最佳燃烧方案的探讨│ 大唐陕西略阳发电厂技改工程179 t发电机定子吊装│ 大型发电机中性点电流互感器故障分析│ 大型发电机中性点采用高阻抗配电变压器接地的配置方法│ 大型发电机内冷却水处理方法介绍│ 大型发电机励磁功率整流柜基本参数设计与选择│ 大型发电机励磁系统仿真仪的开发与测试│ 大型发电机定子一次定位安装技术│ 大型发电机定子机座铁路运输工具-挂货钩裂纹扩展预测│ 大型发电机定子铁损试验及分析│ 大型发电机灭磁系统设计的几个主要问题│ 大型发电机线圈制造改进工艺研究│ 大型发电机组供热的相对经济效益评估方法及应用│ 大型发电机组可靠性预测方法与应用│ 大型发电机组同期回路的设计及防止非同期、误上电事故的应用分析│ 大型发电机组的安装调试和质量控制要点│ 大型发电机组磁极线圈匝间短路故障分析及处理│ 大型发电机组转子用异形银铜排的国产化│ 大型发电机组过励磁保护整定计算│ 大型同步发电机进相运行动模试验设计│ 大型同步发电机静态励磁系统的最新技术应用│ 大型同步发电机非线性最优预测综合控制│ 大型数据中心应急发电机系统设计│ 大型数据中心配套柴油发电机系统设计简析│ 大型机组发电机断路器配置分析│ 大型核电半速汽轮发电机设计特点│ 大型水轮发电机失磁保护与低励限制配合问题的探讨│ 大型水轮发电机定子绕组大电流干燥案例分析│ 大型水轮发电机定子铁损试验技术研究│ 大型水轮发电机机组滑环装置安全运行与分析│ 大型水轮发电机组下机架组装及焊接工艺技术│ 大型水轮发电机组定子线棒并头结构分析│ 大型水轮发电机组定子铁损试验研究│ 大型水轮发电机组导水机构安装技术│ 大型水轮发电机组顶盖密封的改造│ 大型水轮发电机转子支架立筋工地加工工艺│ 大型水轮发电机铜环固定螺杆损耗计算│ 大型汽轮发电机失步振荡的网机耦合仿真│ 大型汽轮发电机失磁保护定值整定探讨│ 大型汽轮发电机定子单相接地的继电保护评述│ 大型汽轮发电机定子机座的基本结构│ 大型汽轮发电机定子绕组局放监测系统中环形耦合电容器的设计│ 大型汽轮发电机组低频振动故障案例研究与分析│ 大型汽轮发电机组可调节回热抽汽设计思想│ 大型汽轮发电机组渐变式弯曲转子的动平衡方法研究│ 大型汽轮发电机组碰摩故障案例研究及分析│ 大型汽轮发电机组碰磨故障分析与处理│ 大型汽轮发电机转子直流电阻偏大的分析与处理│ 大型汽轮发电机转子线圈数控揻弯机研制│ 大型汽轮发电机静态励磁产生的轴电压及其抑制策略仿真研究│ 大型混流式水轮发电机蜗壳安装及焊接施工工艺│ 大型灯泡贯流式发电机定子的吊装方法│ 大型热电厂发电机定子吊装机械的组合应用│ 大型热电机组供热、发电厂用电率计算方法探讨│ 大型燃气轮发电机定子接地保护方案│ 大型燃煤发电机组能耗时空分布特性│ 大型电力推进客船发电机励磁控制与故障工况仿真│ 大型船舶发电机短路故障分析与诊断方法探讨│ 大容量发电机出口断路器对中性点接地设备选择的影响研究│ 大容量发电机出口断路器选择│ 大容量发电机组水系统冲洗新工艺│ 大容量轻型发电机防爆技术探讨│ 大岗山水电站水轮发电机组发变组保护配置分析│ 大河水电厂2%5e%23发电机组励磁装置故障原因分析及处理│ 大洑潭电站灯泡贯流式水轮发电机组技术开发│ 大源渡航电枢纽发电机组冷却系统改造│ 大电流发电机断路器动特性优化│ 大马力同步发电机的研究与设计│ 天然气发电机余热回收系统的应用效果评价│ 天铁180t工业锅炉发电机组节能技术开发│ 天铁25MW发电机定子吊装技术│ 太平湾发电厂3号发电机转子磁极匝间短路故障的分析和处理│ 孙吴县城市供水管线加装水轮发电机组的可行性分析│ 孤网发电机调速系统参数定量调整理论分析│ 安装阶段控制发电机漏氢的措施│ 安阳鑫龙煤业公司红岭煤矿瓦斯发电机组余热利用│ 定子斜槽设计对贯流式水轮发电机空载电压的影响研究│ 定子槽耦合器法在发电机局部放电监测中的应用│ 宝泉抽水蓄能电站发电机定子应急抢修技术介绍│ 宝马745Li: Generator not generating electricity caused by PT-CAN fault│ An example of BMW generator repair│ Phase advance operation and emergency voltage control of capacitive isolated generator│ Research on wide-range voltage-stabilized composite excitation synchronous generator│ Design of wide-band micro piezoelectric vibration generator│ Control strategy and design of waste heat recovery of cold area biogas generator set│ Capacity expansion and reconstruction of No. 1 and No. 2 hydroelectric generator sets of Charsen Reservoir Power Plant│ Analysis of a generator shutdown accident caused by busbar protection action │ Research on the causes and treatment methods of vibration of hydro-generator units │ Re-analysis of generator capacity calculation formulas │ Analysis of generator capacity calculation formulas │ Research on the stability of split-type hydraulic generators │ Discussion of the status of gas turbine generators that are turned on during the day and shut down at night Design of fuzzy controller for small hydropower generating units and its 89C51 implementation │ Selection of vacuum circuit breaker for small-capacity generator outlet protection │ Analysis of configuration scheme of fault recorder for small-capacity generator transformer set │ Discussion on the stability of phase-in phase operation of small-capacity isolated grid generator set │ Realization of primary frequency modulation function of hydro-turbine generator set in Xiaoshan Power Station │ Identification of generator-side fault types using wavelet packet energy and LM-BP neural network │ Simulation study on turbine blades of small-diameter underground generators│ Modification of the generator protection device of Nilji Power Plant│ Exhaust gas residual pressure recovery to drive the generator to generate electricity│ Processing technology of 1150MW generator shaft in Ling'ao Nuclear Power Station│ Application of industrial endoscope in preventing single-phase grounding of generator stator│ Research on key insulation properties of stator bar and winding of bulb tubular turbine generator at Jerry Power Station in Brazil│ Judgment method for outlet terminal labeling of low-voltage generators with secondary windings │ Research on dynamic balancing method of turbine-generator units with overhanging cantilever ends │ Research on differential measurement error of dry coke quenching generator units │ Simulation research on fuzzy PI intelligent control of parallel hybrid excitation generators │ Measures to create benefits for automatic power generation control management of grid-connected generator units │ Assembling process of turbine generator rotor of Lechangxia Water Conservancy Project in Guangdong Province │ Emergency generator set neutral point grounding problem │ Emergency self-contained generator sets should pay attention to neutral point grounding problem │ Apply generator active power change characteristics to solve unexpected problems in TRT operation │ Cummins generator set installation capacitance compensation device process │ Cummins diesel generator set electrical control system failure analysis │ Application of switching transformer technology in synchronization of hydrogenerators │ Current research status of switched reluctance generator control technology │ Common problems and solutions to the imported 300MW generator sealing oil system │ Application of spring vibration isolation technology in turbine generator sets │ Basic dynamic characteristics test of spring isolation turbine generators │ Analysis of factors affecting the phase depth of large-capacity generator sets │ Design and application of micro piezoelectric generators on buses │ Research on resonant frequency adjustment technology of micro piezoelectric vibration generators │ Application of microcomputer excitation devices in turbine generators │ Research on drive control strategy of high-speed permanent magnet synchronous starter generator for micro-gas turbine│ Quick troubleshooting of generator│ How to improve the reliability of rectifier bridge for alternator│ Research on material performance optimization of cantilever piezoelectric vibration generator│ Insulation analysis of stator tightening screw of Huizhou pumped storage power station generator│ Hot keying technology of generator rotor yoke of Huizhou pumped storage power station│ Assessment of asymmetric short-circuit current peak value of induction generator connected to distribution network│ Three-phase short-circuit current peak assessment of induction generators connected to the distribution network │ my country will build a 1200MW ultra-supercritical coal-fired generator set │ my country’s first 600,000-kilowatt subcritical Oreo-fired generator set with completely independent intellectual property rights is put into production │ Application of execution-dependent heuristic dynamic programming in synchronous generator excitation system │ Expanded unit wiring generator selective revoltage overcurrent protection research │ Analysis of the impact of Yangjiang 5203 line tripping on generator sets │ The practice of condensate recycling and utilization of Chenggang Xidi saturated generator set│ A brief analysis of the control of extraction condensing turbine generator set│ A large-capacity generator set circuit breaker complete device with independent intellectual property rights was successfully developed│ Vibrating piezoelectric generator and its application in wireless sensor network│ Discussing the application of large turbine generator test technology│ Application of contact shaft seal on 25MW generator set│ Characteristics of coal-fired boilers of 300MW generator units mixed with blast furnace gas and their energy-saving effects │ Measures to improve the reliability of generator stator grounding protection action │ Experimental research on improving the charging efficiency of vibration generators │ Measures to improve the power generation operation rate and power generation capacity of sintering low-temperature waste heat generator units │ Measures to improve the no-load voltage waveform of salient pole synchronous generators │ Research on improved speed regulation system of electric drilling rig diesel generator sets │ Application of digital PID regulator in diesel generator sets │ Research on the manufacturing and assembly process of integral transportation structure turbine generator │ Safety control method of large generator sets under cross-section zero power condition │ Research and application of new generation generator excitation regulating device │ Research on acceleration criterion of new generator demagnetization protection │ Application of new thrust tile extraction tools in hydraulic generator maintenance │ New diesel engine driven arc welding generator │ Xinzhuangzi Power Plant - Analysis of #2 Generator Stator Ground Fault│ Capacity Increase and Renovation of Xincun Power Station Hydrogenerator Unit│ Xinjiang Main Power Grid Generator Phase Advance Test and Analysis│ Performance Analysis and Test of Gyromagnetic Excitation Piezoelectric Cantilever Generator│ Rotating Micro Generator Magnetic Field Analysis│ Application of Disturbance-free Fast Cutting Technology in Bus Belt Generator Operating Conditions│ Production Practice of Kunming Iron and Steel 5MW Sintered Ring Cooler Low-temperature Waste Heat Generator Unit│ Application of intelligent purification device in generator constant cooling water system │ Application of active harmonic filter in air-cooled generator set │ Analysis and application of finite element software in claw pole alternator │ Application of mechanical interlocking in generator transformer set of nuclear power plant │ Renovation of excitation system of generators No. 3 and 4 in Zhenzizhai Power Plant │ Diagnosis and treatment of rotor vibration fault of a 1000MW generator │ Monitoring method and analysis of elevation change of a certain 1000MW turbine generator unit│ Analysis and treatment of shafting vibration failure of a certain 330MW turbine generator unit│ Performance development and NVH control of a certain passenger car generator│ Analysis of causes of misoperation of protection of #1 and #2 generators of a certain power plant│ Research on stress detection of the stator core tightening screw of a certain generator│ Analysis and processing of causes of abnormal excitation voltage during the starting process of a certain 9E gas turbine generator│ Diagnosis and treatment of misalignment vibration failure of a certain turbine generator coupling │ Calculation and analysis of the natural frequency of torsional vibration of a certain type of turbine generator rotor │ Analysis of hydrogen anomalies in the oil of a large generator step-up transformer │ Analysis of the cause of the burnout accident of a large hydraulic generator's excitation lead │ Analysis and treatment of vibration problems of a certain small hydraulic generator set │ Vibration isolation design and optimization of a certain diesel generator set for a locomotive │ Analysis of the causes of low vacuum in a certain steam turbine generator unit and system improvements │ Vibration analysis of a 1000MW generator set in a certain power plant │ Causes and solutions to the low water filling accident of a 125MW condensing generator set in a certain power plant │ Overhaul experience of a 600MW generator in a certain power plant │ Analysis of the causes of leakage of the No. 3 high-pressure heater cylinder of a 600MW unit in a certain power plant Thermal Power Generation Issue 2, 2008 │ Diagnosis and treatment of rotor turns short circuit fault of a 600MW turbine generator in a power plant│ Research on low signal malfunction of cold water flow in the stator of a power plant's generator│ Frequency conversion transformation of the condensate pump of a power plant's generator set│ Test analysis of the adaptability of diesel oil and low-sulfur diesel oil in a power station's diesel generator│ Analysis and treatment of faults in the excitation system of a hydraulic generator set in a power station│ Analysis of water intrusion faults in the fuel system of a marine diesel engine generator set│ Analysis of the fault diagnosis method for damage to a certain ship's generator│ The finishing process of the engine cylinder head valve of a certain general generator set│ The improved design of the hoisting mechanism of the generator of a certain radar vehicle│ Discussion on the superiority of setting GCB at the generator outlet of the Zhexi Hydropower Plant Expansion Project│ Research on the design of the Kamchai turbine generator in Cambodia│ Dealing with the rapid wear of the negative electrode brush of the hydrogenerator of the Liuhong Hydropower Station│ Analysis of the problem of picking up the starting signal of the diesel generator│ Comparison and application of diesel generators and EPS emergency power supplies │ Application of diesel generators in the power supply system of radio and television centers │ Feasibility study on the operation of diesel generators with 10kV through-line cable lines │ Key points and ideas in the design of diesel generator rooms │ Practice of changing diesel generator hand crank start to electric start │ Improvement of diesel generator control circuit │ Diesel generator short-circuit current calculation and related protection issues │ Voltage drop calculation of diesel generator system │ Common faults and daily maintenance of diesel generator sets │ Design of diesel generator chassis CAD system │ Troubleshooting of diesel generator sets │ Selection of test carrying and support solutions for diesel generator sets │ Matlab simulation research on frequency modulation control and power interactive oscillation of diesel generator sets │ Detection methods and hazard prevention of diesel generator set shaft voltages │ Modular design of diesel generator set auxiliary systems │ Problems and solutions in the operation of diesel generators │ Research on the stator coil mold of nuclear power half-speed turbine generator │ Optimization of the cooling water quality in the generator of the 300MW unit of the nuclear power plant │ Progress assessment and milestone management of the steam turbine generator unit of the nuclear power project │ Analysis of the phase potential of the synchronous generator under the action of trapezoidal magnetic density │ Analysis of RSO experimental technology for detecting generator rotor interturn short circuit and its application │ Analysis of the adaptability of modular hydraulic couplings applied to 600MW supercritical coal-fired generating units │ Development of synchronous inverter to simulate the characteristics of synchronous generators│ Application of fuzzy control technology in generator excitation system│ Comparison of similarities and differences between American Carter generator and domestic Jichai 12V190 fuel injection system and promotion of practical adjustment methods at drilling sites│ Discussion on capacity verification of standby diesel generators in civil buildings│ Selection of diesel generator sets and machine room design in civil buildings│ Comprehensive treatment of hydrogen leakage from hydrogen internally cooled generators│ Treatment and improvement of hydrogen leakage failure in outlet casing of hydrogen-cooled generator│ Failure analysis of refrigeration dehumidification device of hydrogen-cooled generator│ Electrical insulation test of stator winding of hydrogen-cooled generator│ Analysis and treatment of hydrogen leakage of hydrogen-cooled generator│ Analysis and treatment of hydrogen leakage failure of hydrogen-cooled generator│ Treatment of hydrogen leakage in hydrogen-cooled generator│ Discussion on operation and maintenance of hydrogen-cooled generator│ Optimization and improvement of sealing oil vacuum pump system of hydrogen-cooled generator│ Analysis and research on hydrogen leakage of water-hydrogen-hydrogen-cooled generators │ Application of underwater cameras in the maintenance of hydroelectric generator sets │ Application of water-medium hydraulic reducers in small and medium-sized hydroelectric generator sets │ Treatment methods for stator bar blockage in water-cooled generators │ Analysis of frequency conversion energy-saving technical transformation of hydraulic generators │ Stacking technology of stator cores of hydraulic generator sets │ Analysis and treatment of hydraulic generator rotor grounding │ Analysis of several problems in the protection and transformation of generators in Shuikou Hydropower Station │ Analysis of common anomalies in fixed-cooled water and gas meters of water-hydrogen-cooled generator units │ Analysis and treatment of defects in insulation boxes at the ends of stator bar bars of hydropower plant generators │ Renovation of control systems of hydraulic device of hydropower plant generators │ Analysis and countermeasures of non-full-phase shutdown faults of hydropower plant generators │ Hydropower plant hydrogenerator units │ Analysis and treatment of reasons for excessive upper guide swing of hydropower plants │ Treatment measures for excessive upper guide oscillation of hydraulic generator │ Research on the estimation method of radial stiffness value of the upper frame of hydraulic generator │ On-site treatment process of lower guide slip rotor falling off of hydraulic generator │ Numerical analysis and laser measurement of main shaft deflection of hydraulic generator │ Measurement research of low-frequency vibration of hydraulic generator │ Analysis and processing of power swing of hydraulic generator │ Analysis and processing of causes of excitation transformer protection action of hydraulic generator │ Analysis and design of modification of hydraulic generator excitation system │ Analysis and treatment of faults in hydraulic generator excitation system │ Comparison of pressure steel pipe drainage methods of hydraulic generator │ Analysis and treatment of hydraulic generator noise │ Methods to reduce deformation in the processing of large circular plate-shaped components of hydraulic generator │ Analysis and prevention of stator damage during demagnetization operation of hydraulic generator │ Relay protection technology for single-phase grounding of hydraulic generator stator│ Analysis of relay protection technology for single-phase grounding of hydro-generator stator│ Field application of hydro-generator stator winding temperature measurement method│ Analysis and treatment of causes of hydro-turbine generator stator winding insulation breakdown│ Hydro-turbine generator stator winding insulation fault test search│ Hydro-turbine generator stator core loosening and broken teeth analysis and prevention│ Hydro-turbine generator stator iron loss test│ Hydro-turbine generator stator core deformation fault analysis and treatment measures│ Analysis and countermeasures for the loosening of the stator core of the hydrogenerator│ Analysis and treatment methods of the loosening of the stator core of the hydrogenerator│ Research on the processing technology of the small yoke convex key of the hydrogenerator│ Research on the partial discharge online monitoring system of the hydrogenerator│ Partial discharge status monitoring system of the hydrogenerator│ Fatigue analysis method and application of the elastic oil tank of the hydrogenerator│ Analysis of the vibration analysis method of the hydrogenerator│ Analysis and treatment of reasons why hydraulic generator circuit breaker refuses to operate │ Brief discussion on overhaul and turning of hydraulic generator unit │ Vibration treatment and cause analysis after modification of hydraulic generator unit │ Design and application of hydraulic generator comb-tooth rotor magnetic pole press installation tooling │ Analysis and prevention of operating faults of hydraulic generator carbon brushes and collector rings │ Improvement of manufacturing process of elastic key of hydraulic generator yoke │ Causes and improvement measures for the increase in temperature of the upper guide tiles of hydro-turbine generator sets │ Design of end face seals in main shaft seals of hydro-turbine generator sets │ Measurement of low-frequency vibration signals of hydro-turbine generator sets │ Research on torsional vibration characteristics of single-shaft system of hydro-turbine generator sets The assembly process of the stator core of the hydro-generator unit on site │ Treatment of loose stator core of the hydro-generator unit │ The impact of the hydro-generator unit on the dynamic stability of the power system │ Modification of the segmented closing device of the guide vane of the hydro-turbine generator unit │ How to deal with common vibrations of the hydro-turbine generator unit │ Analysis of common faults and maintenance countermeasures of the hydro-turbine generator unit │ Common faults and preventive measures of the hydro-turbine generator unit │ Emergency repair of strong vibration of the hydro-turbine generator unit Hydraulic generator set assembly and cranking technology │ Analysis of hydraulic generator set vibration causes and treatment measures │ Development of hydraulic generator set vibration monitoring software system │ Hydropower generator set oblique rib stator frame stress analysis and discussion │ Hydrogenerator set failure analysis and treatment of failure to automatically start excitation │ Hydrogenerator set intelligent fault diagnosis technology review Comparison of electric braking modification plans for hydro-generator sets│ Maintenance characteristics and maintenance cycles of hydro-turbine-generator sets│ Condition monitoring and fault diagnosis of hydro-turbine-generator sets│ Research on electrical braking methods of hydro-turbine-generator sets│ Analysis and treatment of out-of-control manual operation of the speed regulator of hydro-turbine-generator sets│ Analysis of nonlinear output response of the speed-regulating system of hydro-turbine-generator sets│ Research on installation technology of large vertical ribs on the rotor of hydro-turbine-generator sets│ Decomposition study of the axis trajectory of the hydro-generator set│ Analysis of the influence of the shaft length of the hydro-generator set on self-excited vibration│ Analysis of over-speed events of the hydro-generator set and improvement measures│ Research on the design scheme of the over-speed protection system of the hydro-turbine-generator set│ Causes and treatments for severe vibrations during the operation of the hydro-turbine-generator set│ Analysis of the causes of excessive collector ring temperature of the hydro-turbine-generator set and technical improvement measures│ Analysis and treatment of the causes of frequent starts of the oil pump of the governor of the hydro-turbine generator set│ Design and calculation of excess force of hydro-turbine generator│ Finite element analysis of thermal sleeve interference between hydro-turbine generator rotor and yoke│ Analysis and treatment of causes of insulation damage of hydro-turbine generator rotor lead wires│ Analysis and treatment of causes of burn-out of hydro-turbine generator rotor slip rings and carbon brushes│ Analysis and treatment of causes of hydro-turbine-generator rotor insulation degradation│ Insulation treatment and capacity increase of hydro-turbine generator rotor│ Design of bolt connection of hydro-turbine generator rotor│ Accident treatment of hydrogenerator rotor shaft head fracture │ Repair treatment of hydrogenerator shaft bending │ Hydrogenerator shaft insulation monitoring method and effect analysis │ Analysis of three-phase sudden short-circuit transition process of permanent magnet synchronous generator │ Effect of internal impedance of permanent magnet synchronous generator on voltage regulation rate │ Research on cogging torque weakening method of permanent magnet synchronous generator │ Modal analysis and natural frequency calculation of automotive claw pole generator stator│ Vibration of No. 4 watt of turbine generator and its elimination│ Analysis and suppression of static excitation shaft voltage in turbine generator│ Analysis of AC and DC demagnetization of turbine generator│ Analysis and treatment of reasons for high cold hydrogen temperature of turbine generator│ Discussion and research on increasing vacuum of turbine generator condenser│ Analysis and treatment of reasons for oil leakage of turbine generator excitation oil barrier│ Optimization of PSS parameters of turbine generator excitation system│ Analysis of turbine generator field winding short circuit and unbalanced electromagnetic force associated with faults │ Dynamic analysis of turbine generator foundation base plate │ Vibration modal analysis and experimental research of turbine generator stator frame │ Treatment of loose binding of turbine generator stator end │ Monitoring and intervention of turbine generator stator winding vibration │ Research on online monitoring system for turbine generator stator winding end vibration │ Analysis of the electromagnetic force characteristics at the end of the stator winding of the turbine generator│ Analysis and treatment of the looseness of the stator core of the turbine generator│ Treatment and preventive measures of the looseness of the stator core of the turbine generator│ Partial repair welding process of turbine generator sealing tungsten tiles│ Application of online monitoring technology for partial discharge of turbine generator│ Research on circulating water heating technology of turbine generator│ Brush plating repair of damaged main parts of turbine generator│ Analysis and countermeasures for the reasons for excessive humidity in the hydrogen cooling system of the turbine generator │ Transformation of the electro-hydraulic regulating system of the turbine generator │ Transformation of the vacuum tube of the turbine generator │ Stress analysis of the stator end winding during stable operation of the turbine generator │ Analysis and treatment of abnormal current of the EH oil pump of the turbine generator unit │ Analysis and optimization of the OPC control strategy of the turbine generator unit │ Causes of abnormal vibration or excessive vibration in the turbine generator unit │ Causes and preventive measures of power oscillation of turbine generator sets│ Analysis of faults of exciter rectifier of turbine generator set and maintenance measures│ Analysis of dynamic and static friction faults during the startup process of turbine generator set│ Cooling modification of pressure equalizing box of turbine generator set│ Measures for turbine generator set to operate in a safe zone in summer│ Key points in the design of oil pipeline of turbine generator set package│ Analysis of reasons for reverse power generated instantly when turbine generator sets are paralleled│ Vibration protection logic setting of turbine generator set│ Treatment and analysis of major vibration faults of turbine generator set│ Analysis of influencing factors of turbine generator set vibration│ Analysis and treatment of causes of excessive vibration of turbine generator set│ Analysis and treatment of causes of hydrogen leakage of turbine generator set│ Repair welding process of turbine generator set cylinder│ Optimization of circulation flushing process of turbine generator set oil system│ Fault diagnosis and analysis of turbine generator set lubricating oil system│ Analysis of on-site high-speed dynamic balancing examples of turbine-generator units │ On-site high-speed dynamic balancing test of turbine-generator units │ Vibration analysis and processing of turbine-generator units │ Analysis of the reasons for low vacuum of turbine-generator units │ Analysis of control strategy of air-cooling system of turbine-generator units │ Analysis and treatment of causes of shaft voltage of turbine-generator units │ Alignment method of turbine-generator unit shaft system │ Calculation and analysis of torsional vibration dynamic response of turbine-generator unit shaft system │ Multi-index nonlinear coordinated control of torsional vibration of turbine-generator unit shafting│ Development of torsional vibration simulation test bench for turbine-generator unit shafting│ Calculation method for centering of turbine-generator unit shafting│ Repair of journal wear and strain of turbine-generator unit│ Research on accuracy improvement of fault diagnosis method of turbine-generator rotor inter-turn short circuit│ Analysis and processing of turbine-generator rotor inter-turn short circuit│ Online automatic balancing technology of turbine generator rotor│ Micro-arc welding treatment process for strained grooves in turbine generator rotor journals│ Influence of turbine generator rotor damping system on small disturbance characteristics│ Turbine generator shafting torsional vibration mode analysis│ Examples of major turbine generator accidents│ Maintenance and overhaul of turbine generator collector rings and carbon brushes│ Nonlinear coordinated sliding mode stability control of turbine generators│ Analysis and treatment of bolt breakage of top shaft oil distributor of turbine generator│ Debugging and analysis of the turbine generator jacking oil system │ Henan Baoquan high-head hydrogenerator unit rotor assembly process │ Troubleshooting of self-provided generators in oil fields and measures to prevent reverse power supply │ Repair of residual magnetization loss of Siyang control gate standby generator exciter │ Research on the sound insulation performance of foam aluminum materials for generator noise │ Analysis of the application of injected stator grounding protection on large generator sets │ Technical improvement measures for cooling down the generator of the Jinghui Canal Head Power Station│ Adjustment of the electrical cranking and guide shoe clearance of the hydrogenerator unit of Hongkou Power Station│ Brief analysis of the problems existing in the sealing oil system of the 200MW generator│ Brief analysis of the phase-advancing operation of the 210MW turbine generator│ Brief analysis of the gas monitoring system of the 390H generator│ Brief analysis of the protection of the generator operation by the low excitation limit of the excitation device│ A brief analysis of the hazards of high-order harmonics in the generator's three-phase electromotive force to radar │ A brief analysis of the reasons for too small excitation current of the generator │ A brief analysis of the treatment of generator anomalies │ A brief analysis of the feasibility of localization of protection for a 9E gas turbine generator │ A brief analysis of the structure and working principle of a hydroelectric generator │ A brief analysis of the processing technology of the DC generator casing for pumps │ A brief analysis of the use and maintenance of EFI diesel generator sets │ A brief discussion on the design of 4-pole explosion-proof permanent magnet synchronous generator │ A brief discussion on the problems and solutions during debugging of the M701F gas generator set │ A brief discussion on the quality control of generator stator manufacturing supervision │ A brief discussion on the causes and preventive measures of generator slip ring and carbon brush heating │ A brief discussion on the grounding protection of the generator stator of Dagangshan Hydropower Station │ A brief discussion on the problems encountered during the cranking process of the 1^# hydrogenerator unit in Tuohongtai Power Plant │ A brief discussion on the selection of diesel generator capacity │ A brief discussion on the parallel connection of diesel generators │ A brief discussion on the quality control of hydro-generator unit modifications │ A brief discussion on the design of ultra-high voltage pumped storage generator transformers │ A brief discussion on the operation and maintenance of shaft-extension tubular hydro-generators │ The design of logging hydraulic generator voltage control module │ Research on the impact of the layout position of crude oil generators on offshore platforms │ Application of waste heat recovery technology of turbine generators in offshore oil and gas fields │ Analysis of factors affecting the load capacity of offshore oil platform gas turbine generator sets │ Application of seawater desulfurization in 300MW mixed-fired blast furnace gas generator sets │ Analysis of fuel switching guarantee for main generators of offshore platforms │ Design of maintenance and operation platform for offshore platform gas turbine generator sets │ Research on boosting and transformation methods of synchronous generators of offshore oil platforms │ Research on control technology of offshore oil production and storage turbine generator sets │ Analysis of cooling of diesel generator sets of offshore drilling platforms │ Diagnosis and treatment of bearing vibration faults of TRT generators in Lianyang Iron and Steel Co., Ltd. │ Research on power converters for turbine generators │ Influencing factors and control strategies of transient indicators of hydraulic generators │ Optimization and transformation of vacuum break valves of hydraulic generator units in Shenxigou Power Station │ Design and experimental research of mixed-excitation underground turbine generators │ Design and performance analysis of hybrid-excitation permanent magnet generators │ Stability analysis of low-head operation of Francis turbine generators │ Experimental study on the temperature rise of the rotor coil of the generator set of Yuzixi Power Station │ Improvement of the excitation control device of the port tire crane generator │ Analysis of the current status of the excitation system management of the generator in the Hunan Power Grid │ Research on the input of the primary frequency regulation function of the generator set in the Hunan Power Grid │ Current status and analysis of the phase advance operation of the grid-connected generator in the Hunan Power Grid │ Update and reconstruction of the stator of the generator in the Hunan Town Power Station │ Analysis and treatment of the causes of stator defects of the generator in the Hunan Town Power Station │ Application of wet current in brushless excitation generator rotor voltage circuit │ Key technology for vibration and swing control of Xiluodu 800MW hydrogenerator set │ Calculation of rigidity of lower frame of Xiluodu generator │ Solution to the problem of frequent fractures of Weichai generator belt tensioning bracket │ Introduction to the structure of hydrogenerator set of Pankou Hydropower Station │ Axis adjustment process of horizontal hydrogenerator of Panjiakou Hydropower Plant │ Analysis and treatment of the failure of the active power of the generator in the Chaozhou water supply hub to increase│ Response measures to accidents of the hydroelectric generator set in the Chaozhou water supply hub│ Application of laser cutting machines in hydroelectric generators│ Analysis and research on vibration faults of generators in thermal power plants│ Collection of papers on failure analysis and full-process life management of key components in thermal power plants│ Analysis of selection, configuration and use of air cannons for raw coal bunkers in thermal power plants│ Analysis of high-temperature faults and modifications of the stator of light bulb tubular generators│ Selection of power factor of bulb tubular turbine generator│ Discussion on the oil supply method of hub oil tank of bulb tubular turbine generator unit│ Vertical static balancing process of rotor bracket of bulb tubular turbine generator│ Analysis and treatment of abnormal slip ring brush of bulb tubular turbine generator│ Improvement of blanking quality of high-silicon and high-strength punching sheets of thermal energy generator│ Research on inter-turn short circuit fault monitoring system of gas turbine generator rotor│ Gas-steam combined cycle generator sets participate in power grid peak shaving operations │ Water vapor quality supervision and dosing control of gas-steam combined cycle generator sets │ Design characteristics of gas-steam combined cycle cogeneration generator sets │ Research on condition monitoring and fault diagnosis monitoring systems of gas generator sets │ Design and simulation of air-fuel ratio control system of gas generator sets │ Design of air-fuel ratio control system of gas generator sets │ Sensitivity analysis of 20Hz injection stator grounding protection of gas turbine generators │ Selection and application of high-voltage side current transformer of gas turbine generator excitation transformer │ Analysis of gas turbine generator variable frequency starting characteristics and protection configuration │ Debugging research of gas turbine generator hydraulic cranking system │ Improvement of gas turbine generator power signal loop logic │ Analysis of gas turbine generator terminal bolt movable lead breakage │ Analysis and treatment of the defect of increased DC resistance of gas turbine generator rotor │ Gas turbine generator unit lubricating oil system flushing method │ Construction quality supervision of flue gas desulfurization equipment for coal-fired power units │ Performance test and related precautions of limestone-gypsum wet flue gas desulfurization system for coal-fired power units │ Development and application of consumption difference analysis system for coal-fired power units │ Research on reasonable configuration of sampling machines for coal-fired power units │ Special purpose brushless synchronous generator coil forming process and application │ Application of condition monitoring and diagnosis technology in turbine generator fault diagnosis │ Analysis and treatment of low defects in the generator rotor insulation of Yuxi Power Station │ The influence of ambient temperature changes on the measurement accuracy of the generator sealing tile gap │ Dynamic balancing fault diagnosis and practice of modern hydraulic generator sets │ Development of modern hydraulic generator speed regulation strategies │ Research and application of fieldbus in the auxiliary engine program control system of 2×1000MW generator set │ Research on the method of on-site generator iron loss test │ Noise control of gas generator sets │ Emergency plan for using a small power generator to drive high current equipment │ Use waveform diagram method to analyze the Y0 rectifier circuit of the alternator │ Test the generator neutral point arc suppression coil parameters using experimental methods │ Reflection on generator tripping caused by fuse blowing │ Cause analysis and treatment of generator vibration and excitation fluctuations in Jialin Power Station │ Application of potential external shift test in finding generator defects │ Potential method to detect the insulation performance of the handbag at the end of the stator bar of a water-cooled generator │ A review of research on generator set maintenance planning in the power market environment │ Selected scientific and technological achievements of electric power construction in 2013 2013 │ Feasibility study of simultaneous identification of generator and load parameters in the power system │ Improvement of genetic algorithm for optimal combination of power system generator sets │ Analysis of the impact of power system harmonics on generators │ Design of communication unit for electric drilling rig diesel generator set control system │ Calculation method for selection of electric drilling rig diesel generator sets │ Analysis and testing of harmonic hazards of power plant generators│ Brief analysis of standardized management of maintenance and overhaul of power plant generator sets│ Exploration and practice of optimal load distribution of multiple generator sets in power plants│ Special transport box for power plant transformation equipment│ Energy-saving transformation of auxiliary equipment of power plant gas generators and unit startup optimization│ Analysis of the advantages of installing generator outlet circuit breakers in power plants│ Application practice of electronic injection diesel generator sets in high altitude areas│ Multi-index nonlinear coordinated control of battery energy storage system and generator excitation │ Application of electromagnetic field finite element technology in generator optimization design │ Application of cable windings in generators and transformers │ Impact of grid faults on generator sets and generator side countermeasures │ Improved control strategy for doubly-fed generator rotor side converter under grid voltage unbalanced state │ Brief analysis of technical transformation of No. 5 hydrogenerator of Baishan Power Plant │ Selection of parameters and main pipe materials of million-kilowatt generator sets│ Research on the demagnetization and asynchronous characteristics of million-kilowatt turbine generators│ Parameter selection of turbine generators for million-kilowatt ultra-supercritical units│ Dealing with vibration problems of top shaft oil pumps in million-kilowatt nuclear power turbine generators│ Application of direct air-cooled generator sets in self-supplied power stations│ DC excitation generator excitation system parameter test modeling and simulation verification│ Analysis of generator tripping and shutdown accidents caused by DC grounding │ Matrix converter - vector control system of permanent magnet synchronous generator │ Evaluation of shielding winding effect in current transformer for generator protection during short circuit fault │ Overview of mud generators for oil drilling │ Analysis of fault triggers and preventive measures for mining diesel generator sets │ Measurement and adjustment of the center and axis of the No. 1 hydrogenerator unit of Bikou Hydropower Station and distribution of guide tile clearances │ Performance test and analysis of carbon nanotube film air flow thermoelectric generator│ Design and coupling analysis of carbon nanotube film thermoelectric generator│ Analysis and preventive measures of generator tripping caused by ground fault of coal mill│ External circulation system of oil circuit of generator set of Shenquan Hydropower Station│ Application of neural network prediction-PID cascade control in excitation control of synchronous generator│ Transformation of vibration tripping method of No.1 and No.2 steam turbine generator units in Qinshan Phase II│ Research and application of air-cooled generator rotor interturn insulation structure │ Analysis of the causes of air-cooled generator differential protection action │ Emergency drying method when air-cooled turbine generator is connected to the grid │ Design of natural air supply and oil mist collection device for air-cooled turbine generator │ Real-time monitoring system for air-conditioning generator set generator unit │ Vertical lathe processing technology for mirror plate of water turbine generator │ Research on elastic turning process of vertical shaft semi-umbrella turbine generator │ Adjustment of the axis and guide bearing clearance of the vertical shaft semi-umbrella hydroelectric generator set │ Installation process of vertical shaft tubular hydrogenerator set │ Brief analysis of measures to ensure the reliability and economy of emergency generator sets │ Brief analysis of the current status and future development of gas turbine generator sets │ Large-diameter anchor bolt embedding technology for gas generator sets in Missan Oilfield │ Application of ultraviolet imaging technology in insulation detection of generator stator bar bars │ Troubleshooting of Hongyan CQ38 generator not generating electricity │ Optimal design of hydraulic generator set of Hongmaodong Power Station │ Experimental research on the operating characteristics of constrained piston internal combustion generator │ Analysis and treatment of generator outlet copper bar grounding failure caused by condensation │ Necessity and urgency of online monitoring of stator end winding vibration of Suidian 800MW generator │ Simulation design of Halbach type permanent magnet linear generator for network sign lights │ Analysis and treatment of excessive vibration value of No. 2 hydrogenerator unit of Luopoba Power Station │ A new type of nanogenerator developed in the United States can provide uninterrupted power supply │ Static voltage stability analysis considering power frequency static characteristics and generator output distribution │ Static stability considering excitation regulation and generator saturation │ Research on new generator demagnetization protection scheme considering machine-grid coordination │ Analysis and processing of the operation condition of No. 1 generator of Leiyang Power Plant │ Noise measurement and noise source identification of combined cycle generator set │ Design of turbine generator magnetic drive for automatic vertical drilling tools │ Stability analysis and control research of generator excitation system of self-contained power plant │ Improvement plan for backup protection of self-shunt excited generator │ Analysis of shaft voltage of self-shunt excited turbine generator set and its protection countermeasures │ Improvement of voltage and frequency control method of self-excited asynchronous generator │ Research on dynamic characteristics of free piston Stirling generator │ Calculation of loss and temperature field of marine high power density permanent magnet generator │ Design of load power automatic control system for ship generator sets│ Research on ant colony algorithm identification of ship synchronous generator parameters│ Research on ship diesel generator speed control system│ H∞ voltage regulator for ship power station synchronous generator status feedback│ Analysis and processing of whistling sound of Maogang power station generator│ Problems and solutions of Laigang CCPP generator set│ New application of evaporative cooling technology on generators of Three Gorges Power Station│ The impact of virtual synchronous generator technology on the stability of distributed power generation grid-connected │ Three-phase inverter small signal modeling and analysis of virtual synchronous generator characteristics │ Diagnostic research and application of vibration signal feature extraction for mechanical faults of power generation units │ Application of ant colony algorithm in generator dynamic parameter aggregation │ Application of honeycomb sealing technology in 25MW turbine generator units │ Application of screw expansion power machine waste heat generator units in steel plants │ Structural design of traveling generators │ Solution to the vibration problem of turbine generator of Xigou Power Station│ On-site assembly process of the stator of the #1 turbine generator of Xijin Hydropower Plant│ Treatment of oil leakage in the 1%23 generator runner blade of Xixi Power Station│ Analysis and treatment of excessive temperature of the excitation transformer of the generator set of Xixi Power Station│ Siemens gas turbine generator hydrogen oil and water system│ Siemens gas turbine supporting generator structure and variable frequency starting system│ Solve the problem of insufficient starting capacity of diesel generators │ The dynamic process of generator self-excitation and related issues taking into account the grid load │ Research on the automatic disturbance rejection control of the generator excitation system taking into account random interference │ On the operation optimization of the unit and improving the economy of the generator set │ On the common faults and maintenance of the turbine generator set in the hydropower plant │ On the analysis and maintenance of the main faults of the aviation alternator │ The application of frequency modulated induction series resonance in generator testing │ 谐波励磁发电机并网运行探讨│ 谐波电流对同步发电机温升的影响分析│ 谐波电流对同步发电机轴转矩平衡的影响分析│ 超临界大容量发电机组负荷优化分配的应用研究│ 超临界燃煤发电机组锅炉调试技术│ 超超临界1000MW汽轮发电机组轴系安全可靠性研究│ 超超临界600MW汽轮发电机组超速特性分析│ 超超临界二次再热发电机组热经济性分析│ 超超临界压力发电用高cr铁素体耐热钢的开发及现状│ 超超临界发电设备用钢的国产化及其应用.doc │ 超超临界机组汽轮发电机高低位布置方案探讨和分析│ 超超临界汽轮发电机长轴系稳定性研究│ 超超临界燃煤发电机组主蒸汽管道运行3万h性能分析│ 超超临界燃煤发电机组汽水品质优化的实践及思考│ 超高层建筑柴油发电机出口电压的选择│ 超高层建筑柴油发电机方案设计│ 车用LIN控制交流发电机稳压器TC80310 │ 车用交流发电机变速过程噪声测试方法研究│ 车用发电机噪声一致性试验研究│ 车用发电机抛负载的保护设计│ 车载液压发电机组瞬态指标控制研究│ 轴流式涡轮发电机的转速分析│ 轴流转桨式发电机组操作油管裂纹事故的抢修│ 轴流转桨式水轮发电机组过速保护配置优化│ 轴流转浆式水轮发电机组安装质量控制│ 输气站场燃气发电机组的能耗测试与分析│ 辨识理论在发电机励磁系统建模中的应用│ 达岱河水轮发电机定子线棒制作工艺│ 运筹学原理在600MW汽轮发电机组启动中的应用│ 进口交流发电机用整流器的代换│ 远距离输电系统大型发电机汽门开度最优控制│ 透平发电机组的自动控制│ 通过继电保护装置动作情况判定发电机定子接地故障│ 遗传算法在发电机励磁系统参数辨识中的应用│ 邯钢CCPP发电机组与常规煤气发电机组运行经济性对比│ 采煤机上微型电磁式振动发电机的发展探讨│ 采用crowbar电路的发电机转子过电压保护试验分析│ 采用GTI Bi—Fuel System对柴油发电机组的双燃料改造│ 采用协同控制理论的同步发电机非线性励磁控制│ 重型燃气轮机发电机出口断路器配置分析│ 量子管通环在600MW发电机组循环水系统的试验应用│ 量子管通环在600MW汽轮发电机组循环水系统的试验应用│ 金兰一级电站发电机定子线圈吸潮问题的处理│ 金兰水库电站水轮发电机组轴瓦烧瓦事故分析及处理│ 钻井船柴油发电机转速控制的研究│ 钻机发电机房几项新技术的应用│ 锦屏Ⅱ级水轮发电机定子机座制作工艺│ 锻造操作机末端运动轨迹对300MW发电机转子轴向中心线上等效应变的影响│ 长洲水利枢纽水轮发电机组重锤关机装置简介│ 长洲电站发电机引出线电缆发热原因分析及处理措施│ 长潭水库水力发电机组自动化监控系统及升级设想│ 防止300MW发电机密封油管路振动的措施│ 防爆发电机励磁系统实施方案简述│ 防爆发电机设计思路│ 陈村#3水轮发电机组增容技术改造│ 降低丰水期发电机组冷却水滤水器的堵塞次数│ 降低氢冷发电机漏氢量问题的探讨│ 陶岔渠首水利枢纽水轮发电机组选型设计研究│ 随钻测井用涡轮发电机叶轮组水力性能分析│ 隔爆型发电机转子线圈扁绕模具设计│ 静止励磁轴电压滤波回路对发电机转子接地保护装置的影响│ 静音型电源车车载发电机组散热分析及试验研究│ 频谱分析在20 MW发电机组故障诊断中的应用│ 飞机环形配电系统发电机负载分配均衡性研究│ 飞来峡水利枢纽3号水轮发电机组调速器油温高故障分析及处理│ 飞来峡水轮发电机励磁整流桥受潮故障分析及处理│ 高参数、大容量发电机组锅炉膨胀中心研究│ 高唐电站2号发电机转子一点接地故障的分析与处理│ 高层建筑中柴油发电机组容量的选择│ 高温高压发电机组汽机间工业冷却水的循环利用│ 高炉煤气余压发电机组电气解列控制优化│ 高炉煤气燃机发电机组空气进气系统对机组出力的影响│ 黄埔发电厂#6发电机转冷水系统改造│ 黄埔发电厂2号发电机转子漏水处理│ 龙口发电机内部故障主保护配置方案研究│ 龙开口电站水轮发电机大轴工地同镗工艺│ 龙溪水电站发电机组动平衡问题的解决│ 龙门滩二级电站发电机组保护装置改造设计│ └─9.0 发电、电厂、发电机设备课件余热发电工艺及设备综述105页.ppt 发电厂电气设备状态检修技术 33.ppt Electrical part of power plant, fourth edition PPT 689 Electrical part of power plant (fifth edition) PPT 792