Wiring of the YT-1000R regulator
Thread Content
As the title suggests, I’ve searched online for instructions on wiring this valve regulator, but there are many different approaches, and it’s really confusing. Who has the manual and the wiring terminal manual? Please send one, thanks. Email: matlac@126.com
This post was last edited by jfwzf on 2018-3-13 09:29. See the image below. Sorry, I can’t upload pictures. Wiring method: 1. Unscrew the fixing screws of the wiring box and open its cover. 2. The terminals marked (+) on the terminals inside the junction box are connected to the (+) pole of the power signal line, while the terminals marked (-) are connected to the (-) pole of the power signal line. To prevent poor contact, please tighten the fixing screws. 3. Close the wiring box cover and tighten the fixing screws.
When the cover is removed, there should be an IN terminal for connecting the signal line, and an OUT terminal for the feedback