Seeking advice on the capacity and diameter of nitrogen seal valves
Thread Content
My client wants to buy DN25 nitrogen seal valves. He wants to know if these valves will be suitable for tanks with a capacity of 150400 SFCH per standard. It’s a single tank, and four valves are required for that tank. I’m a bit confused – 150400 SFCH corresponds to 4259 m³/h. Does this value have anything to do with the valve diameter? Can this valve meet this requirement?
It would be best to have a simple diagram; I’m not sure about the role of this valve in the process.
The tank has both a maximum and a minimum suction volume, which need to be considered comprehensively. Connect several groups in parallel to check whether the CV value of the valve meets the requirements.
The air supply volume of the nitrogen seal valve is related to both the inlet pressure and the outlet pressure; all three factors must be taken into account. You can provide me with the parameters, and I’ll help you do the calculations. Email: 18611077503@163.com
The air supply volume of the nitrogen seal valve is related to the inlet pressure and outlet pressure