HCBBS Forum (Deutsch)
Submit Chemical Projects / Find Solutions
Amplify Your Requirements on a Broader Chemical Platform *Engineering · Technology · Equipment · Solutions*
Submit Request

[" Elektrisch betriebene weiche Schließflügeltüren häufige Schäen und

2020-10-22View Original

Thread Content

  电动软密封蝶阀依靠电动执行器的电机带动蝶阀的阀轴转动,阀轴带动蝶板旋转90°来实现阀门的启闭,可以做截断和调节流量使用。电动软密封蝶阀的电动执行器带有极限终点限位开关,到终点能自动切断电路,同时为了保障工程安全,电动软密封蝶阀设有电力过载保护装置和信号灯指示。电动软密封蝶阀的故障和处理方法一般有以下几种: 故障1.阀门填料处外漏 原因:①填料老化严重。②压盖螺栓没有拧紧或出现松动。 解决方法:①更换新的填料。②均匀的拧紧压盖螺栓。 故障2.端盖出现渗漏 原因:①螺栓未拧紧。②O型圈损坏。 解决方法:①检查螺栓是否松动,将其拧紧。②更换新的O型圈。 故障3.密封面发生渗漏 原因:①蝶板关闭不到位。②密封面存积污垢,导致关闭不严。③密封面损伤。 解决方法:①调整电动蝶阀电动执行机构上的螺钉,将蝶板关闭到位。②清理密封面的存积污垢。③修补损伤的密封面。 故障4.电动装置运转不灵活导致阀门不能正常启闭 原因:①填料压的过紧。②填料的压盖没有紧固到位,发生倾斜。③过度装置故障损坏。 解决方法:①填料压盖不要压得过紧,适当放松。②校正填料压盖的垂直度。③更换新的过渡装置。 故障5.启闭到头了电机没停或者启闭不完全 原因:①极限开关失灵了或者是过载保护装置不准。②极限开关动作过早或反应太迟。   解决方法:①更换极限开关或者对过载装置做调整,保证精准度。②调整极限开关的反应速度。   了解并掌握了以上电动软密封蝶阀经常出现的故障和解决方法,相信以后如果再有类似的阀门问题,你也可以自己动手解决了!

Submit a Project

**Looking for Chemical Technology, Equipment & Solutions?** No Registration Required Broader Platform Exposure | Global Chemical Service Provider Connections

Submit Request — Free Consultation

Disclaimer

This is an automated machine translation of the original thread. Some technical terms may have inaccuracies; the original text shall prevail. Click "View Original" at the top right to access the source page, which supports IP-based automatic real-time language translation. Please watch out for contact details and sales inducements to prevent fraud. All content and translations are for reference only, representing solely the poster's personal views. For enquiries, email service@hcbbs.com.