The problem of water content in directly supplied crude oil is severe
Thread Content
I use crude oil that is supplied directly to the terminal; there are few crude oil tanks on site, which results in the dehydration process not meeting the required standards from time to time. Crude oil often contains water. Is there any effective way to address this issue without adding more crude oil tanks or extending the dehydration time? After all, there isn’t enough space in the factory to build new tanks
A liquid removal tank can be added inside the device, which reduces the cost compared to using a separate tank area~~
In irrigation areas with a high water content, the cutting-off time will be longer! Does the direct labor and material installation not have a raw oil tank?
There are only three small jars, and there has never been enough time to cut the water
There are generally only two ways to deal with dehydration: one is to increase the settling time, and the other is to add demulsifiers. Without sufficient settling time, nothing else will work. Unless a demulsifier is added at the dock.
Everyone should unleash their innovation skills; practical problems on the spot require unconventional solutions! This is because conventional approaches can no longer meet the needs of current petrochemical enterprises... Please go back to your textbooks, seek theoretical support, and then find creative solutions to this problem! Nowadays, companies are moving towards larger scales, and their supply chains are also longer! Conventional separation devices are becoming less relevant, as systems that allow for direct feeding help companies save on investment costs and reduce energy consumption – and this is the first step toward deeper reforms in the petrochemical industry. Secondly, adjusting the product portfolio to meet market demands is what truly matters!
Power-on desalination can be disabled; it can serve as a heat sedimentation tank
A buffer tank is still needed, as this makes the operation more stable.
A dehydrating agent is added at the dock; upon arrival at the plant, the water is removed from the tank, and the desalination tank is powered on to act as a buffer. What size device are you?
The 10mta terminal is not under our control. It belongs to the Petroleum Administration Bureau
Adding a dehydrating agent during transportation and also when unloading at the company will be effective as well