Catalytic main air volume adjustment
Thread Content
In normal production, is the main air flow adjusted using static vanes or by adjusting the exhaust volume? Thank you!
Can the static blades be adjusted automatically? Thank you
Under normal circumstances, it is adjusted using static blades.
Adjusting with stationary vanes results in high energy consumption for venting
It must be the static blades; we use manual control, and automatic control is unstable
Stator vanes for adjustment; the premium version uses venting, which is also quite noisy.
We first use venting for adjustment; during venting, fine-tuning is carried out. If the venting amount is too large or too small, then static vanes are used for adjustment
Of course, the stationary blades – if they’re left unattended, it could lead to disturbances that bother the local residents
Apart from the significant reduction in capacity of the device, the host is still running, which results in low air flow; accordingly, air is released appropriately to affect the operation of the host, or during the startup adjustment process. Using main air venting as a routine adjustment method is really quite drastic!