If the crude oil contains water, should more water be injected during electrodialysis treatment?

Electrodesalination is used for regulation, with stability being the primary goal. When the water content in the crude oil suddenly increases, the first step is to reduce the intensity of water injection and mixing; once stability is achieved, parameters such as water injection and mixing are adjusted based on the actual conditions on site.

The opposite is true; it should be to reduce the water injection volume, and in severe cases, stop the water injection or even reduce the production volume

Stop feeding water; it seems that using a primary distillation tower would yield better results

Put the initial distillation tower into use? Can it still be cut out?

　　Cement is an essential material in house construction; it is used to strengthen the connection between the bricks, making it an indispensable substance. Since the reform and opening up, the pace of housing construction in China has accelerated alongside economic development. The houses built at such a rapid pace come with certain risks, and one of these risks is foam formation. Fortunately, cement mortar defoamers exist, which help to eliminate this problem. 　　Cement is divided into three types: general-purpose cement, special-purpose cement, and specialty cement. Manufacturers of cement mortar defoamers explain that each type of cement has its own unique uses and properties, enabling it to be applied to various construction tasks. The production process of silicate cement is representative in cement manufacturing. It uses limestone and clay as the main raw materials, which are crushed, blended, and ground to form clinker; this clinker is then fed into a cement kiln to be calcined into mature cement, which is subsequently ground together with an appropriate amount of gypsum (and sometimes mixed materials or admixtures). 　　The reasons for foaming when cement is used are as follows: (1) Unproper gradation, with too much coarse aggregate and too little fine aggregate ； 　　(2) Improper aggregate size, excessive content of flaky and acicular particles ； 　　(3) Concrete with high water consumption and a high water-cement ratio ； 　　(4) It is related to certain admixtures as well as the chemical composition of the cement itself. Defoamers. Biochemical treatment involves using microorganisms such as bacteria, fungi, algae, and protozoa to oxidize and decompose harmful substances in water into harmless ones. These microorganisms can survive in water containing toxins, use these toxins as nutrients for reproduction, and thereby convert the toxins into new substances that are harmless to humans. 　　For defoamers, the greatest advantage is their ability to eliminate foam rapidly, as well as their foaming-inhibiting properties. In various manufacturing processes, numerous bubbles can form due to factors related to the silice-free defoaming agents themselves or to external environmental conditions. Small bubbles can dissipate on their own, but as the number of bubbles increases, if they are not removed in a timely manner, it is likely to affect the progress of production as well as the quality of the products manufactured. 　　For a company, every minute and second of operation is extremely valuable; therefore, if the smooth progress of production processes is not ensured, it often leads to unnecessary losses. For large amounts of foam, this leads to unnecessary losses for businesses; it not only delays production but also results in waste of funds, time, labor, and so on. Therefore, in various industrial processes, it is particularly important to ensure the dissipation of foam; only by eliminating these foams can businesses operate smoothly, which in turn brings more positive effects to their development.

Increase the temperature of the initial distillation tower to prevent water from entering the heater; increase water removal and stop water injection

If water is detected in the crude oil, water injection must be stopped to prevent the electrodialysis tank from tripping.