Thread Content
The wastewater flow meter commonly used in industry today consists of an electromagnetic flow meter sensor and a converter, and is used to measure the volumetric flow rate of various conductive fluids or fluid-solid mixtures within pipes. Electromagnetic flowmeters, especially those designed for wastewater, are widely used in industries such as chemicals, metallurgy, papermaking, water management, environmental protection, printing and dyeing, petroleum, and coal to measure the volumetric flow rate of conductive liquid media in wastewater. Why is it a good choice to use an electromagnetic flowmeter as a meter for measuring wastewater flow? The measurement of flow rate is not affected by changes in the fluid’s density, viscosity, temperature, pressure, or conductivity. The voltage signal generated by the sensor is linearly related to the average flow velocity, which ensures high measurement accuracy. There are no flow-blocking elements inside the pipeline, so there is no additional pressure loss ； There are no moving parts inside the measurement pipeline, so the sensor has an extremely long lifespan. Since the induced voltage signal is generated throughout the magnetic field-filled region and represents an average value over the pipe cross-section, the straight pipe section required by the sensor is short, with a length of 5 times the pipe diameter. A variety of electrode and lining materials are available to meet the requirements for corrosion resistance and wear resistance. The HSBLDE converter utilizes the latest and most advanced microcontrollers and surface-mount technology available internationally; it features reliable performance, high precision, low power consumption, stable zero point, and easy parameter setting. An LCD is displayed in Chinese, showing cumulative flow rate, instantaneous flow rate, flow velocity, flow percentage, and more. A two-way measurement system that can measure forward and reverse flow rates; it utilizes special manufacturing processes and high-quality materials to ensure that the product’s performance remains stable over time. The characteristics of electromagnetic flowmeters are what contribute to their wide range of applications; they are definitely the preferred choice for measuring wastewater flow. As for determining which model of electromagnetic flowmeter to use during measurement, as well as regarding the electromagnetic aspects related to these flowmeters, one can directly contact Feng Instrument Flowmeter Manufacturer for consultation. Electromagnetic flowmeters offer a protection rating of IP67 (dust and water resistant) or IP68 (dust and submersion resistant). In sewage treatment plants, the sensors of large-diameter flow meters are mostly installed underground; therefore, it is recommended to choose a IP68 rating (dustproof and waterproof). Generally, electromagnetic flowmeters have the following requirements regarding the installation location: when measuring mixed-phase fluids, a location that will not cause phase separation should be chosen ； When measuring two-component liquids, avoid filling them downstream where the mixing has not yet been uniform ； When measuring chemical reaction pipes, it should be installed downstream of the section where the reaction is fully completed ； Try to ensure that the straight sections before and after are at least 5D and 2D respectively ； Try to avoid negative pressure forming inside the measurement tube ； Choose a location with minimal vibration, especially for integrated instruments ； Avoid having large motors, large transformers, etc., in the vicinity to prevent electromagnetic interference ； Places where it is easy to implement separate grounding for sensors ； Try to avoid areas with high concentrations of corrosive gases in the surrounding environment ； Avoiding direct sunlight as much as possible is useful for the conventional display and measurement of fluid flow rates, as well as for trade settlements