What is the excessive impact of the continuous exhaust from the waste heat boiler?
Thread Content
If the exhaust flow rate of the waste heat boiler is too high, what impact does it have on the operation of the boiler system? Does it have a significant effect on the steam production of the boiler?
The purpose of opening the drain valve is to control the quality of the steam. For this to be possible, it is necessary to keep the liquid level in the boiler’s drum as close as possible to the location of the drain outlet (which is usually situated in the middle of the drum). As long as the parameters are within acceptable limits, there is no need to open the drain valve widely; obviously, this would result in a waste of both water and steam
In simple terms, it leads to energy waste, and it also affects the quality of the boiler water and steam!
1. Find \"tips\" for operating it – don’t make any adjustments usually, and increase the setting only when the soda starts to boil: lol 2. The design pressure of the vent container is quite low; when ventilation is enabled, a large amount of water will vaporize, causing the pressure inside the container to rise. Even though the ventilation valves are those on small pipes, it’s still best to be cautious