83. What are the phenomena of circulating water shutdown in this position and how to handle them?
Thread Content
83. What are the phenomena of circulating water shutdown in this position and how to handle them?
Phenomenon: Rising temperature at the oil cooler outlet； The temperature of the motor stator and the smoke extractor base increases. Handling: Promptly investigate the cause. When the bearing temperature and stator temperature become excessively high and cannot be reduced, or when there is an increasing trend in the vibration of the smoke extractor, proceed with an emergency shutdown
Is there any information regarding the foamy oil in the low-pressure scrubber (triethylaluminum adsorbed by white oil)? There will be a generous reward
Pay special attention to large-scale equipment； The other aspect is the control temperature for cooling, via water cooling ； It’s a bit better when the materials delivered are used as direct feed for downstream devices. For those going to storage and transportation, it is necessary to lower the temperature or reduce the overall amount of processing ；
Phenomenon: Rising temperature at the oil cooler outlet； The temperature of the motor stator and the smoke extractor base increases. Handling: Promptly investigate the cause. When the bearing temperature and stator temperature become excessively high and cannot be reduced, or when there is an increasing trend in the vibration of the smoke extractor, proceed with an emergency shutdown
That position? That device? Could the instructions for creating questions be more specific? It also makes it easier for the answerer to find the answer. The questions are set too casually, raising suspicions of topic manipulation.