Seeking advice on selecting a methanol pump
Thread Content
Help select two methanol pumps with flow rates of 20 L and 200 L per hour. The pressure is around 1.5 MPa. We are currently using a single-screw pump, which wears out severely after just two days of use and is unable to generate pressure. Thank you! It would be best to have a manufacturer, thank you!
20 L and 200 L per hour – a diaphragm metering pump will suffice
Can a diaphragm metering pump achieve a pressure of 1.5 MPa?
Diaphragm pumps can handle up to 8.0 Mpa
Thank you all. I’m not very familiar with diaphragm pumps; from what I’ve read, their pressure capacity is only around 7 kilograms. I would appreciate some advice
This post was last edited by Lantian on 2017-12-29 at 11:25 :D A metering pump is used. Name: Jiangsu Shunxiong Environmental Protection Equipment Co., Ltd. (specializing in the production of NIKKISO metering pumps). Manager Qian, 13093068360. It can meet your needs.
A three-plunger pump using heavy water will work just fine
Gear pump, diaphragm pump, vortex pump, plunger pump (20L)~~~~~~~~~~~~~all are acceptable
The diaphragm metering pump mentioned above is a good choice; since your flow rate requirement isn’t high, a diaphragm metering pump makes it easy to control the flow.