Who has the latest catalog of all current and upcoming standards for the stationary pressure vessel industry?

Never thought of doing this: There is a new one coming out soon, and the news is flying everywhere. GB/T8163-2018 will be implemented early next month. I did the part simply. For reference

I hope Haiyou can add more from laws, regulations and standards.

Pressure vessels are manufactured in a few months. Pressure vessel design certification is required.

The attachment is the company's catalog of standards and regulations for your reference. This catalog should be a summary of the existing regulations and standards in your company's data room.

Thank you very much, 5th floor, the information is very well organized. Special Equipment Safety Supervision Regulations State Council Order (No. 549) Boiler and Pressure Vessel Manufacturing License Conditions National Quality Inspection Boiler (2003) No. 194 Boiler and Pressure Vessel Manufacturing License Work Procedures Boiler and Pressure Vessel Product Performance Supervision and Inspection Rules Special Equipment Welding Operator Assessment Rules TSG Z6002-2010 Special Equipment Non-destructive Testing Personnel Qualification Assessment Rules TSG Z8001-2013 Pressure vessel and pressure piping design licensing rules TSG R1001-2008 Fixed pressure vessel safety technical supervision regulations TSG 21-2016 Special equipment operator assessment rules TSG Z6001-2013 Special equipment information work management rules TSG Z0002-2009 Special Equipment Safety Law of the People's Republic of China 2013* Order No. 4 Pressure Vessel Installation, Renovation and Maintenance License Rules TSG R3001-2006 Basic Requirements for Special Equipment Manufacturing, Installation, Renovation and Maintenance Quality Assurance System TSG Z0004-2007 Special Equipment Manufacturing, Installation, Renovation and Maintenance License Appraisal and Evaluation Rules TSG Z0005-2007 Pressure Pipe Component Manufacturing License Rules TSG D2001-2006 Special Equipment Inspector Assessment Rules TSG Z8002-2013 Pressure vessel GB/T 150.1～150.4-2011 Heat exchanger GB/T 151-2014 Tower vessel NB/T 47041-2014 Horizontal vessel NB/T 47042-2014 Steel pressure vessel - Analysis and design standard JB/T 4732-1995 Pressure vessel for refrigeration equipment NB/T 47012-2010 Aluminum welded vessel JB/T 4734-2002 Titanium welded vessel JB/T 4745-2002 Nominal diameter of pressure vessel GB/T 9019-2015 Spiral plate heat exchanger NB/T 47048-2015 Steel welded atmospheric pressure vessel/solid silo NB/T 47003.1～2-2009 Model and basic parameters of steel liquefied petroleum gas horizontal storage tanks NB/T 47001-2009 Steel vertical cylindrical fixed roof storage tank series HG21502.1-1992 Steel vertical cylindrical solid internal floating roof storage tank series HG21502.2-1992 Mechanical mixing equipment HG/T 20569-2013 Stirring transmission device HG21563-21572-1995 HG21537.7-8-1992 Heat exchanger type and basic parameters GB/T 28712.1～28712.6 Gasket for shell and tube heat exchanger GB/T 29463.1-29463.3 Steel fixed thin tube plate heat exchanger HG21503-1992 Austenitic stainless steel pressure vessel manufacturing management regulations HG/T 2806-2009 Basic regulations for the design of steel chemical containers HG/T 20580-2011 Regulations for material selection of steel chemical containers HG/T 20581-2011 Regulations for strength calculation of steel chemical containers HG/T 20582-2011 Regulations for structural design of steel chemical containers HG/T 20583-2011 Technical requirements for manufacturing steel chemical vessels HG/T 20584-2011 Technical regulations for steel cryogenic pressure vessels HG/T 20585-2011 Pressure vessel coating and transportation packaging JB/T 4711-2003 Heat treatment of stainless steel and heat-resistant steel JB/T 9197-2008 Classification standards for toxicity hazards and explosion hazards of chemical media in pressure vessels HG/T 20660-2017 Tray technical conditions JB/T 1205-2001 Air-cooled heat exchanger NB/T 47007-2009 Copper pressure vessels JB/T 4755-2006 Nickel and nickel alloy pressure vessels JB/T 4756-2006 Limits and fit tolerances, deviations and basis of fit GB/T 1800.1-2009 Limits and fit standard tolerance levels and hole and shaft limit deviation table GB/T 1800.2-2009 Tower design technical regulations HG/T 20652-1998 Plate heat exchanger NB/T 47004-2009 Plate evaporation device NB/T 47005-2009 Aluminum plate fin heat exchanger NB/T 47006-2009 Damage pattern identification of pressure equipment GB/T 30549-2014 Steel spherical storage tank GB12337-2014 Pressure vessel head GB/T 25198-2010 Reinforcement ring JB/T 4736-2002 Pressure vessel flange NB/T 47020～47027-2012 Steel pipe flange, gasket, fastener HG/T 20592～20635-2009 Manholes and hand holes lined with stainless steel HG/T 21594, 21596～21600, 21602～21604 Steel manholes and hand holes HG/T 21514～21535-2014 Basic requirements for bursting disc safety devices Part 1 GB567.1-2012 Bursting disc safety device part 2 application, selection and installation GB567.2-2012 Bursting disc safety device part 3 classification and installation dimensions GB567.3-2012 Magnetic liquid level gauge HG/T 21584-1995 Pressure vessel sight glass NB/T 47017-2011 Combined sight glass HG21505-1992 Pressure vessel corrugated expansion joint GB16749-1997 Reinforced pipe HG21630-1990 General requirements for bolts, screws and studs with surface defects on fasteners GB/T 5779.1-2000 Nuts with surface defects on fasteners GB/T 5779.2-2000 Special requirements for bolts, screws and studs with surface defects on fasteners GB/T 5779.3-2000 Vessel supports NB/T 47065.1～47065.5-2018 Chemical equipment lifting lugs and engineering technical requirements HG/T 21574-2008 Dimensions, shapes, weights and allowable deviations of cold-rolled steel plates and strips GB/T 708-2006 Dimensions, shapes, weights and allowable deviations of hot-rolled steel plates and strips GB/T 709-2006 Explosion welded composite steel plates for pressure vessels NB/T 47002.1～4-2009 Carbon steel and alloy steel forgings for pressure equipment NB/T 47008-2017 Alloy steel forgings for low temperature pressure equipment NB/T 47009-2017 Stainless steel and heat-resistant steel forgings for pressure equipment NB/T 47010-2017 Nickel copper alloy for pressure vessels JB4741～4743-2000 Low alloy steel plates for cryogenic pressure vessels GB/T 3531-2014 High-quality carbon structural steel hot-rolled thick steel plates and steel strips GB/T 711-2017 Low alloy high-strength structural steel GB/T 1591-2008 Steel plates for boilers and pressure vessels GB/T 713-2014 Technical conditions for ordering tubes for boilers and heat exchangers NB/T 47019-2011 Nickel and nickel alloy forgings for pressure vessels NB/T 47028-2012 Aluminum and aluminum alloy forgings for pressure vessels NB/T 47029-2012 Seamless steel pipes for high-pressure fertilizer equipment GB/T 6479-2013 Seamless steel pipes for petroleum cracking GB/T 9948-2013 Stainless steel seamless steel pipes for boilers and heat exchangers GB/T 13296-2013 Nickel and nickel alloy plates for pressure equipment NB/T 47046-2015 Nickel and nickel alloy seamless pipes for pressure equipment NB/T 47047-2015 Allowable deviation of chemical composition of finished steel GB/T 222-2006 Charpy pendulum impact test method for metal materials GB/T 229-2007 Bending test method for metal materials GB/T 232-2010 Tensile test of metal materials Part 1: Room temperature test method GB/T 228.1-2010 Brinell hardness test of metallic materials Part 1: Test method GB/T 231.1-2009 Brinell hardness test of metallic materials Part 2: Inspection and calibration of hardness testers GB/T 231.2-2012 Brinell hardness test of metallic materials Part 3: Calibration of standard hardness blocks GB/T 231.3-2012 Welding terminology GB/T 3375-1994 Weld symbol representation GB/T 324-2008 Welding process qualification of pressure-bearing equipment NB/T 47014-2011 Pressure vessel welding regulations NB/T 47015-2011 Mechanical property inspection of welded test pieces of pressure-bearing equipment products NB/T 47016-2011 Welding Materials Management Regulations JB/T 3223-2017 Non-alloy steel and fine-grained steel electrodes GB/T 5117-2012 Stainless steel electrodes GB/T 983-2012 Heat-strength steel electrodes GB/T 5118-2012 Surfacing electrodes GB/T 984-2001 Steel wire for fusion welding GB/T 14957-1994 Technical conditions for ordering welding materials for pressure equipment NB/T 47018-2017 Steel wire rods for welding GB/T 3429-2015 Classification requirements for stainless steel wire-flux combinations for submerged arc welding GB/T 17854-2018 Low alloy steel wire and flux for submerged arc welding GB/T 12470-2003 Carbon steel and low alloy steel wires for gas shielded arc welding GB/T 8110-2008 Stainless steel wires for inert gas shielded welding YB/T 5091-2016 Stainless steel wires for welding YB/T 5092-2016 Non-alloy steel and fine grain steel solid wires, flux cored wires and wire-flux combinations for submerged arc welding Classification requirements GB/T 5293-2018 Stainless steel wire rod for welding GB/T 4241-2017 Technical requirements for welding of stainless steel composite steel plates GB/T 13148-2008 General provisions for steel wire acceptance, packaging, marking and quality certificates GB/T 2103-2008 Technical requirements for welding of titanium and titanium alloy composite steel plates GB/T 13149-2009 Recommended grooves for gas welding, manual arc welding, gas shielded welding and high energy beam welding GB/T 985.1-2008 Recommended grooves for submerged arc welding GB/T 985.2-2008 Recommended grooves for gas shielded welding of aluminum and aluminum alloys GB/T 985.3-2008 Recommended grooves for composite steel GB/T 985.4-2008 Regulations for post-weld heat treatment of pressure equipment GB/T 30583-2014 Non-destructive testing of pressure equipment NB/T 47013.1～6-2015 NB/T 47013.7～9-2012 Non-destructive testing of pressure equipment Part 10: Diffraction transit time ultrasonic testing NB/T 47013.10-2010

Thank you for sharing. I saw the addition of GB/T24511-2009. Stainless steel plate standard.

GB/T 24511-2017

The latest standard for pipes has been implemented GB/T8163-2018

There are new rules this year in 2019