Guide to Using Vacuum Belts Offline

Thread Content

Vacuum belt dryers are manufactured and tested using the latest technology, and they leave the factory after passing safety inspections. Any informal modifications that could affect their safety performance are not permitted, and this applies equally to installation guards designed to prevent accidental contact. Philo Environmental ensures that those responsible for installation, operation, storage, and maintenance strictly comply with the following requirements and regulations: 1. Prevent any threat to the lives and limbs of users and those around them. 2. Ensure the safety of the machine. 3. Prevent failures and environmental pollution caused by improper handling. 4. Contacting and entering the vacuum belt dryer must be done only when the machine is completely stopped. 5. Hammers and other debris must not be placed on the rotating parts of the vacuum belt dryer. 6. It is not allowed to step on filter cloths, belts, frames, etc. with shoes that have sharp objects such as iron shavings or soft materials such as glue residue attached to them. 7. It is recommended to use components manufactured by our company for replacement; otherwise, our company shall bear no responsibility for any damages resulting therefrom.