Analyze several points to learn how to prevent damage to the knife-turning machine

Thread Content

1. When initially feeding the blade turning machine, the feeding speed should be increased gradually until the rated conveying capacity is reached. The feeding must be uniform; otherwise, it can easily lead to blockages in the conveyed material as well as overload of the driving mechanism, causing premature damage to the entire machine. 2. No hard, large pieces of material should be mixed in the material being conveyed by the blade turning machine, to prevent jamming and resulting damage to the machine. 3. For the blade turning machine, any abnormal phenomena that occur during operation must be checked and eliminated; it must not be forced to operate. 4. When using the blade bending machine, it is necessary to regularly check the working condition of all its components, paying attention to whether any fasteners are loose. If any parts are found to be loose, the screws should be tightened immediately to restore proper fixation. 5. The knife-turning machine should be started without a load, that is, it should be started when there is no material inside the housing; feeding to the knife-turning machine begins only after it has been started. 6. Lubricant should be applied regularly to all moving parts of the blade bending machine.