Thread Content
The chain plate conveyor has a stable structure, making it suitable for the continuous transport of heavy workpieces in large quantities. The emergence of chain plate conveyors has helped companies save on labor costs and improve production efficiency; they are essential conveying devices that drive the development of industrial automation. Although chain plate conveyors **improve a company’s production efficiency**, prolonged use can lead to problems such as unstable operation and high noise levels if proper maintenance is not carried out. This not only shortens the conveyor’s service life but also affects the company’s production processes. Next, the editor will explain to you how to maintain chain conveyor systems. 1. Methods for repairing and maintaining chain conveyor motors: Liquid organic compounds and diesel should not be poured into the motors or speed controllers, nor should water get in, as this will damage the insulation of these components and lead to malfunctions ； Other aspects of maintenance and care can follow the motor specifications in the electrical engineer’s manual. 2. Maintenance of the chains in chain conveyor systems: Temporary operation of the chains causes their lubricant to heat up and evaporate, which results in imbalance during operation, increased noise, and slower movement, among other problems ； This can be resolved by opening the tail seal plate and applying more lubricating grease to the chain. 3. Repair and maintenance of the reducer box at the head end of the chain conveyor: ① Three months after the first use of the reducer box on the chain conveyor, drain its oil, clean it with diesel or gasoline, then drain any remaining liquid and fill it with fresh lubricant to the middle level indicated by the observation window ； ②The chain conveyor should ensure an adequate supply of lubricant on a monthly basis, with the lubricant being replaced at least once a year. Too much lubricant should not be used, as this can cause the gearbox to overheat, resulting in excessive load on the motor and ultimately leading to the tripping of the motor protection switch ； In the worst case, it can easily cause the gearbox to overheat, result in increased noise, or even lead to the gearbox getting stuck and becoming unusable. The above content provides an introduction to the knowledge related to the maintenance of chain conveyor systems; I hope it will be helpful to everyone.