Thread Content
Conveyor mesh belts are very important in the actual use of the industrial machinery industry. Conveyor mesh belts have strong power mobility during the transportation process, making the entire operating equipment run very quickly and ensuring the absolute smoothness of the transportation process of the conveyor mesh belts. If the conveyor mesh belt skips the chain and the running speed is unstable, check to see if there is a problem with the sprockets at both ends of the shaft, and whether the sprocket teeth are excessively worn. If so, replace it in time, so as not to affect the normal operation of the conveyor mesh belt. Mesh belt conveyor is an important equipment for transportation. When using it, you must find out whether there is a problem and where the problem lies, and then find a solution. The conveyor mesh belt can be transported continuously, with high efficiency and at a large angle. It is safe to operate, easy to use, easy to maintain, and has low freight. It can also shorten the transportation distance, reduce the project cost, and save manpower and material resources. The correct use of conveyor mesh belts can reduce the loss of mesh belts and avoid unnecessary waste. 1. Prevent the conveyor belt from starting under load, and measure, record and monitor the surface temperature of the entire conveyor belt continuously and uninterruptedly to avoid unnecessary temperature increases. 2. If the conveyor belt deviates, measures should be taken to correct it in time to keep the transported materials evenly distributed according to the bandwidth and not be too concentrated in a certain part of the conveyor belt. 3. Conveyor mesh belts of different types and specifications and layers should not be connected together. The joints are preferably vulcanized. 4. The type, structure, specifications and number of layers of the conveyor mesh belt should be reasonably selected according to the use conditions. 5. The running speed of the conveyor mesh belt should generally not be greater than 2.5m/s. Materials with large lumps and abrasiveness and unloading devices using fixed pears should be as low speed as possible. 6. The feeding direction should be along the running direction of the conveyor belt. In order to reduce the impact of the material on the conveyor belt when it falls, a chute should be used to reduce the drop distance of the material. ； In the material-receiving section of the conveyor belt, the distance between the rollers should be shortened and the buffer roller should be used to prevent material leakage. The conveyor belt should adopt a soft and moderate baffle plate to prevent the baffle plate from being too hard and scratching the belt surface of the conveyor belt. 7. Prevent the conveyor belt from being blocked by the frame, pillars or block materials to prevent it from being damaged or torn. When the conveyor belt is found to be partially damaged, artificial cotton should be used to repair it in time to avoid expansion. The conveyor mesh belt uses stainless steel mesh belt as the carrier, which is suitable for drying, dehumidification, freezing, heat treatment, etc. in various food industries. ； Made of stainless steel, it has the characteristics of high temperature resistance and easy cleaning. Conveyor mesh belts are widely used in daily life, especially in production lines. Below, Shunfeng Mesh Chain will introduce the daily care when using mesh belt conveyors to achieve the best effect. In automated assembly lines, metal transmission mesh belts, chains and other products are widely used in glass machinery, food machinery, chemical fiber machinery, medicine, electronics, drying machinery, tire machinery and other industries.