Thread Content
When installing a flexible chain conveyor, it is necessary to inspect the contents of the package; this involves checking whether all components are present and whether there are any damages. Once everything is in order, the foundation can be constructed, with care taken to determine the center line and center position. After that, reinforced concrete is poured, followed by the proper maintenance of the foundation. After maintaining it for a period of time and confirming that there are no issues, the equipment can be installed. For flexible chain conveyors, which are machines composed of various conveying components, certain preparatory work must be done before installation. So, what preparations are needed before installing a flexible chain conveyor? These are the preparatory tasks before installing a flexible chain conveyor. Only with adequate preparation can the subsequent installation process proceed smoothly, so please do not overlook this step to avoid getting caught in a rush later on. Before installing the flexible chain conveyor, all components should be cleaned, the rust preventive grease removed, and checked. The holes in the base also need to be cleaned and inspected so that they can be installed properly. Lift the frame onto the foundation, then insert the foot bolts into the foot plates. After that, install the tracks; once the tracks are in place, install the drive sprocket assembly, the tail wheel assembly, the tensioning device, and the chain plates. Install the motor, reducer, and other equipment.