Thread Content
Pilz IQH1-18GM-V1 read/write head. Operating frequency: 13.56 MHz. Complies with the ISO 15693 standard. Suitable for use with FRAM transponders. Read/write head with M18 x 1 threaded connection; connected via V1 (M12 x 1) connector. Features porous LEDs for functional indication. Protection rating: IP67. Used for connecting to the IDENTControl control interface. Description: HF read/write head, ISO 15693 standard, suitable for IDENTControl. General specifications: Operating frequency 13.56 MHz; data transfer rate 26 kBit/s. Detection range: Reading distance – 0...50 mm; writing distance – 0...50 mm. Width: up to 45 mm. UL file number: E87056. Can only be powered by low-voltage, restricted power sources (SELV or PELV) or certified Class 2 power sources. Functional safety parameters: MTTFd – 750 years; task time (TM) – 10 years; diagnostic coverage (DC) – 0%. Indicators/operating methods: Green/yellow LEDs. Porous LEDs: Green – device is powered on; green flashing – read/write test in progress; yellow – data carrier detected. Electrical specifications: Power consumption ≤ 1,2 W. Power supply: from IDENTControl. Compliance with directives: Radio equipment directives 2014/53/EU; EN 301489-1, EN 301489-3, EN 300330, EN 62368-1, EN 50364. RoHS directive 2011/65/EU (RoHS); EN 50581. Compliance standards: Protection rating EN 60529. RFID standards: ISO/IEC 15693-2, ISO/IEC 15693-3, ISO/IEC 18000-3. Certifications and approvals: FCC certification – this device complies with the requirements of Part 15 of the FCC regulations. The operation must meet the following two conditions: (1) this device shall not generate harmful interference, and (2) this device must be able to withstand all interference received, including interference that may cause it to malfunction. Note: Making any modifications or alterations to the equipment without explicit approval from the compliance officer may result in the invalidation of the user’s equipment usage license. KCC certification: KCC-CRI-PF1-IQH1-18GM-V1. Environmental conditions: Operating temperature –25 … 70 °C (-13 … 158 °F); Storage temperature –40 … 85 °C (-40 … 185 °F). Mechanical specifications: Protection rating IP67; Connection type: M12 x 1 connector. Materials: Housing – PBT/stainless steel; Encapsulation compound – CY 221/HY 2966. Installation: Non-planar. Distance between the two ends: In multi-channel open mode: ≥ 30 mm; In multi-channel closed mode: ≥ 80 mm. Weight: Approximately 40 g