Tutorial on setting print margins in CAD software

Thread Content

　　When using Haochen CAD to print drawings, how do I set the print margins? Let’s take a look next! 　　Methods for setting page margins in CAD printing: 1. First, open the HaoChen CAD software, then switch to the “Layout” menu and click on “Page Setup Manager”, as shown in the figure below. 2. After the “Page Setup Manager” dialog box appears, select “Modify”, as shown in the figure below. 3. In the “Printer Name” field, choose the printer that has been installed, then click on “Properties”, as shown in the figure below. 4. Once the “Plotter Settings Editor” appears, switch to “Device and Document Settings” – select “Graphics – Custom Properties”, then click on “Custom Properties”, as shown in the figure below. 5. After the corresponding printer property dialog box appears, switch to “Layout” – click on “Binding Offset/Print Position”, as shown in the figure below. 6. When the “Binding Offset/Print Position” dialog box appears, switch to “Margins” – click on “Enable User-Defined Margins” – and then enter the desired margin values, as shown in the figure below. 7. Finally, click “OK” to save the settings. That’s all for setting print page margins in HaoChen CAD software; the procedures are similar for other CAD software as well, so those who need it can give it a try.