Thread Content
When using the Haochen CAD drawing software to create mechanical drawings, how should one proceed to draw a ball bearing? Ball bearings are often required to be drawn in CAD mechanical drawings. How should one draw them, and how can the model or size of the bearings be modified? Next, let’s take a look at the detailed tutorial. Steps to draw a ball bearing: 1. First, open the HaoChen CAD mechanical software; the operation interface is as shown in the figure below. 2. In the main menu bar at the top of the software, there is a tool palette window function used to open the tool palette ； 3. On the left side of the tool palette, there is a vertical list of main functions; from here, you can select machinery. Once the machinery is selected, the ball bearings will be visible, as shown in the figure below. 4. After selecting the ball bearings, you can choose an insertion point in the blank area and then click the left mouse button – this will result in the ball bearing graphic appearing, as shown in the figure below. 5. If you want to change the model or size of the bearing, you can click on the bearing graphic until a small triangle appears; clicking on that triangle will allow you to make the necessary changes, as shown in the figure below. The above is a detailed tutorial on how to insert ball bearings into CAD drawings using the HaoChen CAD mechanical drawing software. I hope it will be helpful to everyone~