Thread Content
When using the Haochen CAD software to create CAD drawings, there are certain elements that do not need to be drawn manually; it is possible to import and use the desired block materials from the CAD block library. Next, I will provide you with a detailed tutorial on how to create a CAD block library using external blocks in CAD software! Steps to create a block material library using external blocks in CAD software: 1. First, create a new folder on one of the computer’s drives and name it My Block Library, for example: C:\My Block Library. 2. Open the HaoChen CAD software, enter \"external block\": w in the command line and press Enter to confirm, as shown in the figure below. 3. The write block window will then pop up. As shown in the figure below: 4. Open the CAD drawing into which the material is to be inserted, enter the shortcut key for inserting blocks: L, and then press Enter to confirm. 5. Specify the insertion point, and it’s done. 6. Using the same method, we can create our own frequently used libraries in the newly created C:\My Gallery folder through the external block command; when needed, they can be inserted directly using the Insert Block command L. The above is a tutorial on how to create a CAD block material library using external blocks in the Haochen CAD software. Those who need it can refer to this tutorial to follow the steps~