IP issue after restarting CAESAR II 2018; I would like to ask the experts how to resolve it
Thread Content
Computer with Windows 10 64-bit. The virtual IP address has been installed and configured according to the tutorial. But problems occurred after restarting. I would like to ask the experts how to solve this issue: handshake
The virtual IP has been set up. It works on the same day, but not the next day
Are you referring to the loopback network interface for virtual IPs?
I didn’t change the IP address during installation, and it worked fine after I finished setting it up. That’s what happens – it can’t be connected after restarting the computer the next day
Intu’s products are really troublesome; it took me over half a month to figure things out. Once the problem was solved, the issue arose whenever connection couldn’t be established – the SPLM service wasn’t starting automatically, but it worked once it was started manually.
It is often necessary to load and restart SPLM
Yes, every time an error occurs, just stop and restart SPLM