Thread Content
When using the Haochen CAD software to create drawings, it is often necessary to add CAD annotations to the graphics in those drawings. Learning how to use the continuous annotation feature can help increase the drawing speed to some extent. So, how does one use the continuous annotation feature in CAD? Let’s take a look together with the editor at the tips for using the continuous dimensioning function in Haochen CAD mechanical software! Steps for using the continuous dimensioning function in HaoChen CAD Mechanical software: 1. First, open the HaoChen CAD Mechanical software ； 2. Then find the Haochen Machinery menu: click sequentially on Haochen Machinery → Dimensioning → Continuous Dimensioning ； Or enter GMPOWERDIM_CHAIN in the command line. As shown in the figure below: (1) On the first use: Prompt: Select the baseline ； Input: Select a linear dimension. Tip: Starting point of the second lead wire ； Input: Enter the second exit point for the consecutive annotation. (2) When using it for the second time and thereafter: Hint: Start point of the second lead/wheel baseline selection (Enter) ； Input: Enter the second outlet point for sequential annotation ； Result: Continuous dimensioning completed. The subsequent operations are the same as those in Haochen CAD’s “Datum Dimensioning”, so they will not be explained here. For entering tolerances when specifying dimension values, please refer to Intelligent Dimensioning GMPOWERDIM. The above are the tips for using the continuous annotation feature in the domestic CAD software – Haochen CAD Mechanical Software. Understanding how to apply continuous annotations to the content on CAD drawings can help us complete CAD annotations more quickly; everyone should take the time to learn about this.