Do you know these details about the functions of dvc6200?

Thread Content

　I. Function Description of dvc6200 Applicable actuators: Feedback rod angle: from -40° to +20° (“When the angle is greater than +20°, it is achieved through an angle amplification mechanism.” ) Bypass operation: Automatic/manual switch (applicable only to single-acting actuators)
Supply pressure: 140 to 700 kPa (1.4 to 7.0 kgf/cm2)
Single-acting and double-acting actuators
Straight-stroke actuators
Control signal input: 4-20 mA DC signal
Input impedance: Up to 3000/20 mADC for AVP80 model*
Output characteristic: Linear
Air consumption:
4 N/minute (maximum value at 140 kPa/1.4 kgf/cm2)
5 N/minute (maximum value at 280 kPa/2.8 kgf/cm2)
6 N/minute (maximum value at 500 kPa/5.0 kgf/cm2)
10 N/minute (maximum value at 400 kPa/4.0 kgf/cm2, for double-acting actuators)
Maximum air supply flow rate: 110 L/N/minute at 140 kPa/1.4 kgf/cm2 ； At 400 kPa (4.0 kgf/cm2), it is 250 L/N per minute (for double-acting actuators). Output balance pressure: 55+5% (only for double-acting actuators). Lightning protection: Peak surge voltage: 12 kV ； Peak surge current: 1000A Allowable vibration level: When standard mounting components are used on the dvc6200 actuator: 2G (5 to 400 Hz) Ambient temperature: -40°C to +80°C Limit on ambient humidity: Relative humidity: 10% to 90% II. The dvc6200 is easy to use and maintain: ① Automatic setup – Its automatic setup software is a fully automated configuration program. Unlike other brands’ DVC6200, the SVP3000 Alphaplus does not require external devices. To carry out the basic configuration, no computer or special communicator is required; simply press the switch to run the program. 　　②Optimal setting for various application scenarios: When the input signal is below 0.5%, the dvc6200 routes the signal to the actuator mechanism via a bypass, ensuring that the valve closes completely and reliably. 　　It is suitable for both single-acting and double-acting actuators: with the help of a double-acting amplifier, the SVP can be installed on double-acting actuators. 　　Suitable for linear actuators. \"Note: For functions such as communication, diagnosis, and position division, the dvc6200 locator can be used.\"