Selection issues for reaction kettles equipped with stirring level gauges – accuracy requirements
Thread Content
The reaction vessels in these fine chemical plants are equipped with agitators; the measurement port is located at the bottom. What type of level gauge would be suitable for use in such a situation? There is only one port – for example, the LIAS-XXX model. We have previously used a 80G radar level gauge, and it worked fairly well. The accuracy requirements aren’t very high, but the gauge needs to be cleaned frequently. If anyone has experience using a similar device, please recommend it.
Regarding the selection of level gauges for reaction vessels equipped with agitators, it is recommended to choose gauges that can cope with frequent cleaning, possess certain corrosion resistance, and exhibit good stability. In the case of a pipe with only one outlet, an insert-type level gauge can be considered for measurement. Such gauges are suitable for use in pipes with small diameters as well as in sealed containers, and they can accurately determine the height of the liquid level. The LIAS-XXX level gauge might be a good choice; the specific model depends on the process parameters. The Radar 80G level gauge enables non-contact measurement, is less affected by the material inside the pipeline, and is suitable for use in applications with a large measurement range and complex environments. It features high measurement accuracy and reliability. However, since the technology used in this type of level gauge is relatively advanced and its cost is relatively high, in order to meet economic efficiency requirements, it is advisable to consider level gauges based on other technologies, such as ultrasonic level gauges or pressure-based level gauges. A suitable plan needs to be developed based on specific process parameters and budget. .
Selection issues for reaction kettles equipped with stirring level gauges – Precision requirements: Regarding the selection of level gauges, it is recommended to contact specialized manufacturers. For our submersible pumps in storage tanks, users are also required to install a level gauge, which must be linked to the submersible pump. You can get in touch with professional manufacturers in Qingdao. (We are a manufacturer of maintenance-free green-label submersible pumps; contact us at 13863819391)
There is only one port at the bottom, so a transmitter with a single flange is required; if the accuracy requirements are not high, this will suffice. The domestic version is only a little over 300 meters; Yokogawa and Rosemount have higher prices.