Methanol Purification Version – Daily Question 20200411
Thread Content
During the Cat passivation process, what should be done if a sudden increase in the temperature of the synthesis tower is detected? Answer: Immediately stop oxygen addition, increase the water supply to the drum, raise the drum’s blowdown rate, and increase the drum’s vent volume.
Immediately stop oxygen addition; at the same time, increase the water supply to the drum, raise the drainage rate from the drum, and increase the venting volume from the drum
Immediately stop oxygen addition, increase the water supply to the drum, raise the drum’s blowdown rate, and increase the drum’s vent volume.
Immediately stop oxygen addition; at the same time, increase the water supply to the drum, raise the drainage rate from the drum, and increase the venting volume from the drum
Immediately stop oxygen addition; at the same time, increase the water supply to the drum, raise the drainage rate from the drum, and increase the venting volume from the drum
Immediately stop oxygen addition, increase the water supply to the drum, raise the drum’s blowdown rate, and increase the drum’s vent volume.
Immediately stop oxygen addition; at the same time, increase the water supply to the drum, raise the drainage rate from the drum, and increase the venting volume from the drum
Immediately stop oxygen addition, increase the water supply to the drum, raise the drum’s blowdown rate, and increase the drum’s vent volume.
Immediately stop oxygen addition; at the same time, increase the water supply to the drum, raise the drainage rate from the drum, and increase the venting volume from the drum
Immediately stop oxygen addition; at the same time, increase the water supply to the drum, raise the drainage rate from the drum, and increase the venting volume from the drum
Immediately stop oxygen addition; at the same time, increase the water supply to the drum, raise the blowdown rate from the drum, and increase the venting volume of the drum.