Thread Content
Anhui Huayi Chemical Co., Ltd. Tender announcement author/source of acetic acid and ethanol dual material metering system transformation project and methanol and ethyl ester dual material metering system transformation project: date: 2022-03-08 Click rate: 6 2. Bidding and procurement content 2.1. This procurement content: This renovation project is the overall supply of a dual-material metering system for acetic acid and ethanol and a dual-material metering system for methanol and ethyl ester using a dual-material skid-mounted method, including: We are fully responsible for the design, manufacturing, transportation, installation, commissioning, production, quality, warranty and after-sales service of mass flow meters, valves, testing instruments, control boxes and other auxiliary equipment. 2.2 Place of delivery: Buyer specified. 2.3 Completion period: Before June 30, 2022 (specifically based on the actual progress of the project, subject to notification from the buyer. ) 3. Qualification requirements for bidders 3.1 The bidder must be an enterprise or institution registered in the territory of the People's Republic of China, with independent legal personality and corresponding business scope, and must provide a copy of the industrial and commercial business license, tax registration certificate, and organization code with the official seal (or a business license with an official seal of the three certificates in one) ； 3.2 Bidders must have a valid ISO9001 quality standard certification. 3.3 The bidder provides skid-mounted application performance on oil/chemical pipelines. Since January 1, 2018 (subject to the time of contract signing), it has provided no less than 10 sets of the same type of skid-mounted equipment for oil/chemical pipelines, and is accompanied by valid supporting documents such as corresponding contracts or acceptance certificates. 3.4 In order to ensure the quality of the finished skid and facilitate the bidder's on-site supervision and acceptance during the manufacturing process, the bidder must complete the skid domestically, and the skid assembly and testing shall be completed at the bidder's factory. Subcontracting or subcontracting is not accepted. The bidder must have a pressure vessel manufacturing license (A2) and provide a skid-mounted supervision and inspection certificate issued by the bidder's local supervision and inspection agency when the skid is delivered. 3.5 The bidder must have the ability to perform factory flow calibration on the entire metering skid. The flow calibration device should be certified * * Recognized by the metrology department (standard device calibration certificate documents are required). Before leaving the factory, the entire skid must be monitored and calibrated (a CNAS17025 certificate is required), and a third-party calibration report for a single meter and a performance test report for the entire skid must be provided (the flow range of the bidder's standard device must be able to cover the maximum flow range of the metering system, and supporting documents must be provided). 3.6 This tender does not accept consortium bids. 3.7 Compliance * * We must comply with laws and regulations, have good business reputation, and have no records of major violations or violations in our business activities in the past three years. 4. Obtaining Bidding Documents 4.1 Anyone who intends to participate in the bidding process should purchase the bidding documents within the following time: 4.1.1 Time for sale of bidding documents: From March 7, 2022 to March 14, 2022 (Beijing time, the same below) ； Daily 9:00-11:30, 1:30-4:00 pm 4.1.2 * Each set of bidding documents is priced at 800 yuan and is non-refundable.