The instructions for installing the equipment foundation bolts are quite awkward to translate
Thread Content
2” diameter anchor bolts in 3” diameter pipes. The bolts should extend 10” above the concrete surface, with 6” of the bolt length being within the concrete; this allowance is for the nut and locknut. My understanding is that the 2-inch anchor bolts are inserted into 3-inch pipes, and they need to extend 10 inches above the concrete surface of the equipment foundation, with 6 inches of that length being inside the equipment base and grout, while the remaining length is used for installing the nuts. Is there a better translation? Please help, huh. I am extremely grateful.
Among them, 6 inches are fully threaded, with the remainder provided for mounting nuts (with lock nuts).
Well, thank you. That explanation makes more sense now. . . . . . .