Does that senior colleague have experience in measuring the level of gasoline desulfurization alcohol? ? ? ? ? ?
Thread Content
In the gasoline desulfurization unit, there are many liquid levels that need to be measured. However, it’s not clear how to address the issues of corrosion and crystallization caused by the alkaline solutions; I hope experienced colleagues can offer some advice!
A non-contact level gauge that handles gas collection and pressure regulation; it can deal with corrosion, crystallization, sedimentation, bubbling, evaporation, stirring, density changes, extreme temperatures, high and low pressures, and so on. Just do some research and you’ll understand~~~~~~~~~~ Radar level gauges, characterized by their ability to report a full tank as empty and an empty tank as full – well, if only people had the money to afford them! With that much money, one could buy 8 or 10 such gas-level gauges, enough to use them for 80 or 100 years
In the gasoline desulfurization unit, there are many liquid levels that need to be measured. However, it’s not clear how to address the issues of corrosion and crystallization caused by the alkaline solutions; I hope experienced colleagues can offer some advice! For easily crystallizing and corrosive media, it is recommended to consider non-contact measurement; since there is no contact with the medium, there is no need to worry about crystallization or corrosion, nor about pressure. Could the poster tell me what the temperature is? You can take a look at the external-mounted ultrasonic level gauge, also known as the intelligent external-mounted tank level gauge. It is also easy to install – no drilling required, no tank cleaning needed, no production shutdowns; the measurements are not affected by the medium, making it stable and reliable. If you need any materials, you can give me an email address
The pressure is within 1 MPa, and the temperature is 40 degrees. It mainly concerns the selection of local level gauges. The remotely operated radar and floating buoy use double flanges.
What’s the budget? Consider an external ultrasonic level gauge? ? ? The price is a bit higher, but all your requirements can be met – no problem at all.