What is the minimum load for 60,000 units of air separation?
Thread Content
Those who have the data, please share it; our company is currently aiming for a minimum of 436 KPA
The minimum load of 60,000 should be around 45,000; too low and the oxygen pump can’t handle it
Generally, the minimum load is around 70% of the design value
The design is indeed like that, but in practice it’s not possible to reach such a low level; our lowest value is 80 percent
That is, the design is lower than the actual conditions; our load ranges from 75 to 105, while in reality it’s between 85 and 98, and it never reaches 100. The previous air separation units… well, forget about them.
That is, the design is lower than the actual conditions; our load ranges from 75 to 105, while in reality it’s between 85 and 98, and it never reaches 100. The previous air separation units… well, forget about them.
The minimum load generally does not reach 75%, but the maximum load should be able to reach 105%. Domestic air separation units are capable of reaching their designed limits; of course, this also depends on the load of the air compressors used