Questions regarding the selection of plate heat exchangers
Thread Content
Plate heat exchanger: BR05KH-1.0/100-40m2. Material: 304 stainless steel. It’s for water-to-water heat exchange. Please help me check this model – it seems that the diameter isn’t specified.
The diameter is DN125; generally, the pipe connection diameter is not specified in the model numbers of plate heat exchangers.
Thank you. It seems that the 0.5 square meter area per panel required for this model is rarely available on the market?
Plate heat exchanger: BR05KH-1.0/100-40m2. Material: 304 stainless steel. For water-to-water heat exchange. This model indicates that the heat exchange area per plate is 0.5 M2. KH refers to the type of flow channel; depending on the requirements of different operating conditions, HH, LL, and HL flow channels can be combined to optimize heat transfer, thereby ensuring the most economical and efficient operation of the heat exchanger. The operating pressure is 1.0 Mpa, the operating temperature is 100 degrees, the heat exchange area is 40 m2, and EPDM rubber strips are used for water-to-water applications. The interface diameter of BR05 is DN125, that of BR08 is DN200, and that of BR035 is DN100. This production of plate heat exchangers is generally well-known.
Thank you for your patient answers; I am very grateful.