The process and profitability of selecting hematite ore processing equipment

Thread Content

Henan Long specializes in the production of equipment for hematite processing, including wet processing equipment for hematite, as well as various other mining processing devices. These include flotation machines, classifiers, screens, sand pumps, equipment for concentration and filtration, chutes, shaking tables, dryers, and other complete sets of equipment for mineral processing. First-class manufacturers, first-class service – choose Longtai for success. The technical department at Henan Longtai notes that domestic mines and mineral resources are becoming increasingly scarce. Iron ore is an excellent source of iron.* In previous years, magnetite was the most commonly used material; however, due to **years of development, the available resource base has diminished. As a result, hematite processing equipment is used for processing mineral resources, as there are no better alternatives. Moreover, future development will involve a shift towards less developed regions. Based on the actual conditions over the past few years in Henan Longtai, an increasing number of users are turning to brownish-red iron ore processing equipment for mining purposes. Through numerous experiments, it has been found that in the process of developing and producing hematite minerals, when such equipment is used in practice, better results are achieved; this represents a basic prerequisite for ensuring that the products meet **the required standards**. For example, the concentration plant in Wen County, Jiaozuo City, began operations in 2003; the grade of its ore is 30–33. After processing, the grade of the iron concentrate can reach 64–65.8, with a yield of 2.5 tons of iron ore per ton of input ore. Approximately 8–10 elements are recovered from the iron tailings using mining equipment. The cost of the ore is around 130 yuan per ton, while the current price of iron powder is 580–600 yuan per ton. The costs associated with processing include electricity, labor, management fees, taxes, and other expenses, amounting to 50–70 yuan per ton. Thus, the profit per ton of iron powder is around 250 yuan. If the iron ore contains a higher proportion of iron, around 45–50%, it is possible to obtain 1.2–1.5 tons of pure iron powder per ton of input ore, resulting in even higher profits. For example, in the towns and counties of Shaanxi Province where iron ore is found, there are steel processing plants in cities such as Lueyang. These plants process around 1.5 tons of iron ore with a grade of 45-48; per ton of iron powder produced, the profit is around 350 yuan. This is more than the profit obtained from producing 100 tons of flour per day, which is around 30,000-40,000 yuan. Based on these experiences, higher-grade mineral processing equipment yields greater profits, depending on local conditions. The introduction to the equipment used for processing hematite can be divided into the following categories: 1. Low-intensity, staged grinding followed by magnetic separation and reverse flotation; 2. Complete magnetic separation process; 3. Ultra-fine grinding followed by wet magnetic separation; 4. Continuous grinding combined with magnetic and flotation processes; 5. Staged grinding followed by gravity separation, magnetic separation, and flotation; 6. Magnetic separation, reverse flotation, and calcination in combination. This information has been prepared specifically for you by Henan Longtai. These are times of investment and entrepreneurship – if you have enough courage, please come to Henan Longtai. We offer first-class quality and service. New and existing customers are welcome to visit us.