Explain in detail the process of driving
Thread Content
Who can give a detailed explanation of the process of operating at normal temperature with internal compression? Also, please discuss the state of the valves at each stage and the reasons behind it, as well as various methods
Bro, your question is way too broad. Each device is different, so the valve status while driving will definitely vary. Even for the same set of devices, the valve status while driving can also differ. I suggest asking in units and in stages. Don’t ask how to operate from start to finish; instead, ask about the operating directions of the main valves, the precautions for this unit or stage, and the common accidents that may occur.
Oil, water, and electricity are supplied to the equipment; the air compressor is started to increase pressure, air cooling is activated, and purification processes begin. If a circulation machine is available, it is used to start the circulation process and raise pressure further. Gas is directed into the tower for cooling and purification, and the gas supply from the regeneration and water cooling towers is disconnected. The startup protection mechanisms are then disabled, and the system enters production mode.
The backup instrument air supply should be switched over once purification is started