Issues related to the storage of heat exchange equipment

Moisture resistance, dust protection – nitrogen filling is also important for protection

The heat exchanger has had its various channels dried before leaving the factory. When equipment is stored outdoors for a short period of time, the following points should be taken into account: 1) It is recommended to keep it away from the construction site ； Do not open the packaging box ； 2) The storage location should be kept away from vehicles and vibrations ； No equipment should be piled on top of other equipment ； 3) The storage location should avoid corrosion of the equipment materials by steam and liquids ； Especially in marine areas ； 4) Avoid sudden temperature changes ； 5) Special attention should be paid to open channels or pipes to prevent water, sand, or other contaminants from entering ； Given the long storage period, the equipment should be kept indoors. For equipment sealed with nitrogen or other inert gases, it is necessary to regularly check whether there is a positive pressure inside the heat exchanger in order to maintain the pressure of the gas seal. Additionally, when storing the equipment and its accessories, it should be placed with a cover on top and something under it. The housings, tube bundles, and plates of stainless steel heat exchanger equipment must not come into contact with carbon steel equipment; the storage area should be kept flat and clean. Equipment that has been degreased must be protected from contamination by oils and other organic substances. There are already topic discussions in this discussion area; please visit http://bbs.hcbbs.com/thread-1013159-1-1.html.