Modification of zero-pole distance in electrolyzer
Thread Content
This post was last edited by sunjl1981 on 2013-1-6 at 20:21. Dear sea friends, regarding the modification of the zero-pole distance in electrolyzers, which manufacturers do a good job in this area? What should be taken into account during quality inspections? Please give me some advice. hcbbs !! .
Our company has been in this business for 11 years; the technical support was provided by Beihua Ji. We weren’t present during the acceptance process, so we’re not very clear about it
It was made by Jiangyin Ankait, and it’s pretty good. Precautions: 1. After completion, carefully inspect the cathode mesh for any broken wires. 2. The cathode mesh should not be rinsed with pure water; during the trial operation of the pseudomembrane, a small amount of caustic soda should be added to the cathode. 3. The operating pressure has been appropriately reduced. Investigations have shown that the on-site modifications at Beihua Machinery are also good
Ankete, where is your company located? We are also involved in renovation work. Could you tell us how things are working at the moment?
Ankai is located in Jiangyin, Jiangsu; they are in the same industry as your company.