Regarding equipment alignment
Thread Content
Regarding the alignment of the axis, is it counterclockwise or clockwise, or can either be used? I would appreciate some insights on this
By ‘owner of the post’, they mean the direction in which the machine is turned to align it; it should be aligned by turning the wheel in the direction in which the equipment rotates.
Alignment is carried out in accordance with the direction of equipment operation, which is beneficial for mechanical seals.
It is best to consider the direction in which the equipment operates; with German alignment devices, results can be obtained regardless of the direction of rotation
It is possible to align it in either clockwise or counterclockwise direction, but aligning it according to the direction of equipment operation is beneficial for the mechanical seal. Top floor 3!
I use a laser alignment tool, and it needs to be used in both directions; generally, there’s no particular requirement for it.
It is possible to align it in either clockwise or counterclockwise direction, but aligning it according to the direction of equipment operation is beneficial for the mechanical seal. Top floor 3!