May I ask, what is the typical compression force for bellows mechanical seals?
Thread Content
May I ask, what is the typical pressure applied to bellows mechanical seals?:)
Generally, 50%–60% of the total compression amount is sufficient; of course, the installation instructions for the mechanical seal should be followed as per the specifications.
It is generally between 2.5 millimeters and 4 millimeters
Regarding the compression amount of mechanical seals, the bellows range is 4–6 mm, and the spring pressure for mechanical seals in pump systems is generally maintained at around 1.3 to 2.8 kgf/cm2. The optimal value depends on actual operating conditions, the materials used for the friction pair, the design of the compensating ring and auxiliary sealing ring, as well as the required load factor K value, among other factors