What type of water treatment equipment should be used for a boiler with a pressure of 2.5MPa and a capacity of 12T/H?
Thread Content
RT: The hardness of the raw water is 2.4 mmol/h, with a Cl- concentration of 25 ppm. At present, only sodium ion exchangers are available; these can reduce hardness but cannot remove chloride ions. Let’s discuss what kind of equipment would be suitable.*e*e
This post was last edited by gzlzhx on 2013-1-21 at 13:14. I have a complete set of water treatment equipment; for inquiries, please contact ****** *******@163.com
In simple terms, after impurities are removed using activated carbon and multi-media in the initial stages, the RO membrane can then be used to remove chloride ions; specifically, the manufacturer needs to be consulted to design a solution suitable for your water quality