How should the installation location for an air shower be determined?

Thread Content

How should the installation location for a wind tunnel be determined? Wind tunnels are different from ordinary electrical devices; after purchasing one, it is best for the manufacturer to send someone to carry out the installation on-site, with the user only needing to prepare the installation area. This approach helps to avoid any issues related to installation that could affect its subsequent use. Back to the topic at hand, let’s discuss what needs to be prepared before installing a wind tunnel: Preconditions for installing the purification equipment in a wind tunnel: On the day the wind tunnel equipment arrives at the construction site, it is advisable for the user to ensure that all basic installation conditions are in place, so as to avoid any problems resulting from the inability to install the equipment once it arrives on site (except in cases where the supplier has to take the equipment back). Such delays cannot be considered as a breach of contract on the part of the wind tunnel manufacturer, and the costs associated with re-installation, including transportation, installation, and travel expenses, will generally have to be borne by the user ； Before installing a wind tunnel at www.qilvp.com, it is necessary to confirm the following: 1. The user has already determined the location where the equipment will be installed ； 2. The user has installed a 380V three-phase five-wire power supply, and the power capacity of this supply is greater than that of the equipment (the length of the cable connecting the equipment to the power supply is 2 meters) ； 3. The user must provide an installation space for the air shower of appropriate size ； 4. The floor on which the air shower is installed by the user is sufficiently level, with a floor levelness tolerance of ±3mm.