Common faults of nitrogen compressors and their solutions?
Thread Content
Our factory has 3 nitrogen compressors with a displacement of 150 Nm3/h. For some reason, they are unable to produce the required amount of nitrogen gas. I would like to ask the experts what could be the cause. What are also the common faults of nitrogen compressors and how can they be addressed?
First, it is necessary to check whether the compressor’s operating conditions are within the designed range； Next, it is necessary to check whether the compressor has reached its scheduled overhaul time.
First, check whether the intake pressure is normal; if it is, then examine the valve and piston. Abnormally viewing the front-end equipment.
First, check whether the intake pressure is normal; if it is, then examine the valve and piston. Abnormally viewing the front-end equipment.
Check whether the clearance of the piston rings is within the standard range. Verify if the dead center clearance has increased, and check for any leaks in the valve seats