How to set up the compressor liquid separation tank
Thread Content
How to set up the compressor inlet and liquid separation tank of the compressor
The question is a bit general, my suggestion is to refer to: Process design of containers and liquid-liquid mixers ( http://bbs.hcbbs.com/viewthread. ... 8%BC%C6%D7%CA%C1%CF), which includes the process design of the compressor inlet liquid separation tank.
Basically, a water separator must be installed at the inlet of each section of the compressor to prevent water from entering the compressor.
A wire mesh ammonia liquid separator is installed in front of the ammonia piston compressor!