How to improve the effectiveness of using a preprocessor
Thread Content
This post was last edited by sunjl1981 on 2013-1-7 00:00. From what I’ve observed regarding the improvement in the performance of the pre-treater for raw brine in my company, the effect isn’t significant; I hope everyone can offer some suggestions (I’ve just started working as a technician). # ， ， &
The question raised by the original poster is too broad; let’s first introduce the operational situation so that everyone can analyze it together.
The effectiveness of the pretreater can be assessed mainly by the level of magnesium removal at its output; usually, we check whether the effluent is clear. A flotation test can also be conducted to determine the amount of ferric chloride required
The effectiveness of the pretreater depends mainly on the degree of magnesium removal at its outlet; it is important to control the pressure in the pressurized container, as well as the amount of ferric chloride added. Additionally, temperature and the level of alkalinity also have an impact.