At present, what temperature do your manufacturers use to liquefy chlorine compressors?
Thread Content
This post was last edited by sunjl1981 on 2013-1-6 at 23:40. Currently, domestic chlorine compressors are all used for low-pressure liquefaction; we plan to use ones with a capacity of 3-4 KG. I’m wondering what liquefaction temperature control levels the existing manufacturers offer, and what pressure do you use? # ， ， &
The pressure of the Nasim pump can reach 1.25 Mpa; liquefaction can be achieved using ordinary circulating water for cooling
The pressure at 3K can reach 0.6 Mpa, and water at 7 degrees can be liquefied
Our pressure is between 1.8–2.5 KG, and the liquefaction temperature is between -11 and -9