Seek advice on testing methods
Thread Content
Emergency! The submission is due soon. Dear everyone: There are two devices: The first one: 1. Operating pressure: 0.8 MPa. 2. Design pressure: 0.88 MPa ； 3. Operating temperature 40 ； 4. Design temperature 42 ； 5. Diameter 2500mm, height 3500mm. 6. Main material: 20R, 7. Volume: 21.7 m3. 8. Medium: air. Is a hydrostatic test appropriate? Secondly: 1. Operating pressure –0.01 MPa. 2. Design pressure: atmospheric pressure ； 3. Operating temperature 40 ； 4. Design temperature 40 ； 5. Diameter 2500mm, height 6000mm. 6. The main material is Q35-B; 7. The volume is 34.1 m3; 8. The medium is air. How should the leak detection method be chosen?
Based on the parameters you provided, both of the devices you mentioned can undergo a hydrostatic test.
The first one: It can be tested with a hydrostatic test. The second one: it can be used for water filling leak tests or kerosene leakage tests; choose one yourself.
Can more than 30 tons of water be handled by the support system?
If it is a vertical container, it can be installed vertically after being tested in a horizontal position; if it is a horizontal container, a saddle is usually used for ones with a diameter of 2500, as it can bear weight.