Are there any good ways to prevent theft from utility poles?

Anti-theft alarms for power equipment towers, anti-theft alarms for transformers; the latest models of anti-theft control units for power equipment towers; door magnets, alarm sirens, camera-based anti-theft systems; GSM-based anti-theft alarms for power equipment; integrated alarm and monitoring with photography functions; alarm systems with built-in photography capabilities; anti-theft devices, anti-robbery systems, remote controls, infrared detectors, dual-infrared detectors, infrared beam sensors; fire alarms, gas leak detectors, telephone-based alarm systems, GSM alarms, TPMS tire pressure monitors; wireless receiving modules, wireless transmitting modules. Features of the GSM-based anti-theft control unit for power equipment: This system consists of an alarm receiver (GSM alarm module and voice card), a microcomputer (alarm center software), and several alarm control units located at various monitoring stations. These alarm control units are installed on the poles supporting the power lines or next to transformers; in the event that the power lines or transformers are stolen, the power supply to those devices is cut off. The monitoring and alarm host immediately detects the issue and sends alerts to the GSM alarm receiver via wireless GSM text messages and voice calls. Once the alarm receiver receives the signal, it transfers the data to a computer, which then uses specialized software to analyze the situation related to the alarm host and any potentially faulty circuits. An audible alarm is issued, and the screen displays the date and time of the alarm, the extension number that triggered the alarm, as well as the faulty transformer and possible faulty circuits. The actual location of the faulty transformer and the relevant circuits is shown on an electronic map. The alarm data is stored in a database for future reference. Upon receiving the alarm, the duty personnel rush to the scene to investigate the situation and address any issues. The use of GSM wireless communication networks offers the following advantages: 1) Wide coverage – currently, mobile communication networks cover over 95% of the country, with almost 100% coverage in non-remote areas; 2) Long transmission distances – a central station can be set up in any location; 3) High network reliability and stability – the systems are resistant to natural interference, and since they operate on dedicated frequency bands, they are not affected by human-induced interference; 4) Low costs for long-distance communication – the cost per text message sent from one host is around 50 yuan, with an estimated usage period of 1 year. In contrast, radio waves are subject to temperature fluctuations in winter and summer, which significantly affect the stability of such systems, resulting in high costs and maintenance requirements. Therefore, their use is gradually decreasing. In summary, this system boasts practical functions, excellent quality, and reliable performance, making it suitable for use in various outdoor environments. It is widely used for the safety protection of electrical equipment in industries such as electricity, petroleum, and mining. It represents the most advanced alarm system of its kind in China. Functional features: ☆ Suitable for securing 10KV power distribution network transformers, transmission lines, as well as municipal street lighting systems against theft ； ☆ It can monitor three-phase voltage loss alarms and single-phase operation in distribution networks ； ☆ Configure eight wired input alarms (various sensors such as vibration or transformer casing winding can be used) ； ☆ Multiple sets of Chinese text messages and automatic dialing for alerts can be sent, as well as on-site listening can be enabled ； ☆ One host can process the alarm signals from three transformers simultaneously ； ☆ Dr. An Police Station ； ☆ It features a fully sealed aluminum die-cast enclosure that is waterproof, corrosion-resistant, fireproof, and impact-resistant. Technical specifications: ☆ Built-in GSM 900/1800MHz dual-band industrial module ☆ Power supply voltage: AC 380V+10% ☆ Data response time: ≤10 seconds (under normal GSM network conditions) ☆ Temperature: -30～+55℃ ☆ Humidity: 20～85%.

It’s a suggestion worth considering; thank you!

I’m not sure if it will work to install a few landmines