Contents of team safety inspections

Thread Content

Contents of team safety inspections: 1. Check whether employees hold the concept of \"safety first,\" whether they have a strong sense of responsibility regarding safety, whether they possess the necessary safety operation skills and conscientiously abide by safety technical procedures as well as various safety production regulations. Also, assess whether they are willing to correct and stop unsafe behaviors, whether they strictly comply with labor discipline, and whether they ensure safe and civilized production practices. 　　II. Check whether the team has a correct understanding of work safety, whether it has established and implemented a work safety responsibility system, whether it has adhered to the principle of \"five simultaneties\" in work safety, whether it follows the policy of \"three no-lets-go\" for accidents and injuries, whether personnel performing special tasks have received training, passed assessments, and are operating with proper credentials, and whether all safety rules and regulations within the team have been established and properly enforced. 　　Third, check whether there are any unsafe conditions of objects at the production site. 　　1. Check whether the safety protection devices of the equipment are in good condition. Are the protective covers, protective fences (nets), safety devices, interlock devices, indication and alarm devices, etc., complete, sensitive, and effective? Is the grounding (neutral connection) in good condition? 　　2. Check whether the equipment, facilities, tools, and accessories have any defects. Whether the braking system is effective, whether the safety distances meet the requirements, whether the mechanical strength is adequate, whether the electrical wiring is aged or damaged, whether the lifting equipment and ropes comply with safety standards, and whether the equipment is operating under faulty conditions or with excessive load. 3. Inspect the storage, transportation, distribution, and use of flammable, explosive, and highly toxic substances to ensure that relevant regulations are strictly followed, and that ventilation, lighting, fire prevention, and other aspects meet safety requirements. 4. Identify the unsafe factors in the production areas and construction sites. Are there safety exits? Do the elevators and platforms meet safety standards? Are the products stored properly, tools placed in appropriate locations, there is sufficient safety distance between equipment, and is there enough space for operators to move safely? Do the electrical wiring routes and distances meet safety requirements? Are there guardrails and clear signs in hazardous areas? 　　IV. Check whether employees engage in unsafe behaviors and operations during the production process. 　　1. Check for any neglect of safety technical operating procedures. For example: operating without any basis, lacking safety instructions, deliberately damaging safety devices or ignoring them, entering dangerous areas recklessly, and performing tasks such as lubricating, inspecting, repairing, welding, and cleaning operating mechanical devices. 　　2. Check for any violations of labor discipline. For example: joking around, fighting, being inattentive, leaving one’s post, dozing off at work, or moving from one post to another during working hours ； Misuse of machinery, vehicles, etc. 　　3. Check for any incorrect operations or mishandlings in daily production. For example: unclear signals and no alarms during operations such as transportation, lifting, and repair ； Improper handling was carried out regarding heavy objects, high temperatures, high pressures, flammable and explosive materials, etc ； Defective tools, equipment, lifting devices, vehicles, etc. were used. 　　4. Check the wearing and use of personal protective equipment. For example: whether protective clothing, shoes, masks, glasses, etc. are worn correctly when entering the work site ； Electrical work such as electricians and welders