Those who use SGL furnaces, please sign up
Thread Content
This post was last edited by sunjl1981 on 2013-1-6 at 23:48. Dear TX users, those who are using the SGL four-in-one stove, please sign up; I’d like to discuss any issues you may have, such as problems related to using the stove’s burner. This post was last edited by limingshuguang on 2007-12-17 at 11:36.] # , , &
How is the service life of the stove burner ensured?
Explanation: The four-in-one furnace introduced is a hot water furnace. (1) As for product quality, there’s nothing to complain about; the most important factor is the free chlorine level, and it’s excellent! (2) The production capacity can reach the designed level, but it lacks flexibility ； (3) Problems that arise during production: such as issues with starting the furnace, as well as problems related to the use and maintenance of the furnace head, etc. Automatic ignition systems place high demands on instruments; the key factor is the ability to generate a high-voltage spark, and it is often at this stage that problems arise ； After being used for a period of time, the burner tends to scale up due to the alkalinity in hydrogen gas.
1. The free chlorine level should normally be below 5； 2. The operational flexibility is greater than what you said; when starting the furnace, flow is controlled through throttle plates, and there is a minimum production volume. At maximum load, it can reach 110%, but beyond that, various parameters will approach their interlock values ； 3. For automatic ignition, as mentioned above, the key lies in the high-voltage sparking step; it is often this step that causes problems ； 4. The issue of hydrogen carrying alkali is quite troublesome; it forms salt deposits at the burner tip, which tend to stick there ； 5. Hot water issue: It could have been recycled to the thermal power plant, but due to management issues, it is now used for primary brine.